IKEA BDW FINP 450 NE Manual de instruções - Página 26

Procurar online ou descarregar pdf Manual de instruções para Máquina de lavar loiça IKEA BDW FINP 450 NE. IKEA BDW FINP 450 NE 36 páginas.

Imprimir página
IKEA BDW FINP 450 NE Manual de instruções
ENGLISH
ENGLISH
Make sure the cap is screwed on tightly, so that no detergent can
get into the container during the wash program (this could damage
ENGLISH
ENGLISH
the water softener beyond repair).
As soon as this procedure is complete, run a program without
appears on the display, press button
ENGLISH
ENGLISH
loading. The "Pre-Wash" program alone is NOT� � � � � �
reach the desired letter (or mode), hold down button
Residual saline solution or grains of salt can lead to corrosion,
ENGLISH
ENGLISH
to confirm the selection.
for 5 seconds, until you hear a beep.
irreparably damaging the stainless steel components.
Note: If NaturalDry is active and it opens the door, then
The guarantee is not applicable if faults are caused by such
DELAY
DELAY
Operation Indicator will not flash at the end of cycle.
The current selection level number and the salt indicator light
circumstances.
The start time of the program may be delayed for a period
The start time of the program may be delayed for a period
� � � � � �
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
NATURALDRY
DELAY
DELAY
ENGLISH
ENGLISH
of time between 1 and 12 hours.
of time between 1 and 12 hours.
Press button
to select the desired hardness level (see
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
Door opening system NaturalDry is a convection drying system
WATER HARDNESS TABLE).
The start time of the program may be delayed for a period
The start time of the program may be delayed for a period
heating element may be damaged as a result.
1. Press the DELAY button: the corresponding «h» symbol
1. Press the DELAY button: the corresponding «h» symbol
which automatically opens the door during/after drying phase
DELAY
DELAY
ENGLISH
ENGLISH
of time between 1 and 12 hours.
of time between 1 and 12 hours.
Whenever you need to add salt, it is mandatory to complete
appears on the display; each time you press the button,
Water Hardness Table
to ensure exceptional drying performance every day. Door
The start time of the program may be delayed for a period
The start time of the program may be delayed for a period
the procedure before the beginning of the washing cycle.
the time (1h, 2h, etc. up to max. 12h) from the start of
1. Press the DELAY button: the corresponding «h» symbol
1. Press the DELAY button: the corresponding «h» symbol
opens at the temperature that is safe to your kitchen furniture.
ENGLISH
ENGLISH
of time between 1 and 12 hours.
of time between 1 and 12 hours.
the selected wash cycle will be increased.
appears on the display; each time you press the button,
Level
As additional steam protection, special designed protection foil
SETTING THE WATER HARDNESS
German degrees
2. Select the wash program, press the START/PAUSE
2. Select the wash program, press the START/PAUSE
the time (1h, 2h, etc. up to max. 12h) from the start of
1. Press the DELAY button: the corresponding «h» symbol
1. Press the DELAY button: the corresponding «h» symbol
is added together with the dishwasher. To see how to mount
DELAY
DELAY
ENGLISH
To allow the water softener to work in a perfect way, it is essential
Soft
button and within 4 seconds close the door: the timer
the selected wash cycle will be increased.
appears on the display; each time you press the button,
protection foil please refer to (INSTALLATION GUIDE).
that the water hardness setting is based on the actual water hard-
The start time of the program may be delayed for a period
will begin counting down.
The start time of the program may be delayed for a period
2. Select the wash program, press the START/PAUSE
2. Select the wash program, press the START/PAUSE
the time (1h, 2h, etc. up to max. 12h) from the start of
Medium
DELAY
DELAY
ness in your house. This information can be obtained from your local
NaturalDry functionality could be disabled by the user as
of time between 1 and 12 hours.
3. Once this time has elapsed, the indicator light «h»
of time between 1 and 12 hours.
3. Once this time has elapsed, the indicator light «h»
button and within 4 seconds close the door: the timer
the selected wash cycle will be increased.
Average
water supplier. The factory setting is for average (3) water hardness.
switches off and the wash cycle begins.
will begin counting down.
follows:
The start time of the program may be delayed for a period
2. Select the wash program, press the START/PAUSE
The start time of the program may be delayed for a period
2. Select the wash program, press the START/PAUSE
1. Press the DELAY button: the corresponding «h» symbol
1. Press the DELAY button: the corresponding «h» symbol
DELAY
DELAY
To adjust the delay time and select a shorter period of time,
To adjust the delay time and select a shorter period of time,
Hard
of time between 1 and 12 hours.
3. Once this time has elapsed, the indicator light «h»
of time between 1 and 12 hours.
3. Once this time has elapsed, the indicator light «h»
button and within 4 seconds close the door: the timer
1. Go to the Operation Indicator menu as in last step, press and
appears on the display; each time you press the button,
• Switch on the appliance by pressing the ON/OFF button.
press the DELAY button. To cancel it, press the button
press the DELAY button. To cancel it, press the button
switches off and the wash cycle begins.
will begin counting down.
The start time of the program may be delayed for a period
The start time of the program may be delayed for a period
hold
until menu appears.
the time (1h, 2h, etc. up to max. 12h) from the start of
Very hard
1. Press the DELAY button: the corresponding «h» symbol
1. Press the DELAY button: the corresponding «h» symbol
for 5 seconds, until you hear a beep.
• Switch off the appliance by pressing the ON/OFF button.
DELAY
repeatedly until the selected delayed start indicator light
repeatedly until the selected delayed start indicator light
To adjust the delay time and select a shorter period of time,
To adjust the delay time and select a shorter period of time,
3. Once this time has elapsed, the indicator light «h»
3. Once this time has elapsed, the indicator light «h»
of time between 1 and 12 hours.
of time between 1 and 12 hours.
the selected wash cycle will be increased.
2. Press and hold
appears on the display; each time you press the button,
• Hold down button
D
«h» switches off.
«h» switches off.
press the DELAY button. To cancel it, press the button
press the DELAY button. To cancel it, press the button
switches off and the wash cycle begins.
The start time of the program may be delayed for a period
2. Select the wash program, press the START/PAUSE
2. Select the wash program, press the START/PAUSE
D
the time (1h, 2h, etc. up to max. 12h) from the start of
NaturalDry menu.
1. Press the DELAY button: the corresponding «h» symbol
1. Press the DELAY button: the corresponding «h» symbol
• Switch on the appliance by pressing the ON/OFF button.
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
D
repeatedly until the selected delayed start indicator light
repeatedly until the selected delayed start indicator light
To adjust the delay time and select a shorter period of time,
To adjust the delay time and select a shorter period of time,
of time between 1 and 12 hours.
C
button and within 4 seconds close the door: the timer
D
the selected wash cycle will be increased.
appears on the display; each time you press the button,
3. You switched to NaturalDry Control Menu, you could change
•
The current selection level number and the salt indicator light
C
has been started.
has been started.
«h» switches off.
D
«h» switches off.
press the DELAY button. To cancel it, press the button
press the DELAY button. To cancel it, press the button
C
will begin counting down.
2. Select the wash program, press the START/PAUSE
2. Select the wash program, press the START/PAUSE
the time (1h, 2h, etc. up to max. 12h) from the start of
to select the desired hardness level (see
1. Press the DELAY button: the corresponding «h» symbol
D
� � � � � �
status of NaturalDry functionality by pressing button:
C
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
D
repeatedly until the selected delayed start indicator light
repeatedly until the selected delayed start indicator light
3. Once this time has elapsed, the indicator light «h»
3. Once this time has elapsed, the indicator light «h»
C
button and within 4 seconds close the door: the timer
the selected wash cycle will be increased.
appears on the display; each time you press the button,
•
Press button
D
to select the desired hardness level (see
E – enabled d – disabled
has been started.
C
has been started.
«h» switches off.
«h» switches off.
D
switches off and the wash cycle begins.
will begin counting down.
2. Select the wash program, press the START/PAUSE
C
2. Select the wash program, press the START/PAUSE
the time (1h, 2h, etc. up to max. 12h) from the start of
WATER HARDNESS TABLE).
D
The DELAY function cannot be set once a wash cycle
C
The DELAY function cannot be set once a wash cycle
Water Hardness Table
To adjust the delay time and select a shorter period of time,
To adjust the delay time and select a shorter period of time,
3. Once this time has elapsed, the indicator light «h»
3. Once this time has elapsed, the indicator light «h»
button and within 4 seconds close the door: the timer
C
the selected wash cycle will be increased.
has been started.
has been started.
C
Water Hardness Table
press the DELAY button. To cancel it, press the button
press the DELAY button. To cancel it, press the button
switches off and the wash cycle begins.
will begin counting down.
2. Select the wash program, press the START/PAUSE
PROGRAMS TABLE
Level
PROGRAMS TABLE
repeatedly until the selected delayed start indicator light
repeatedly until the selected delayed start indicator light
To adjust the delay time and select a shorter period of time,
To adjust the delay time and select a shorter period of time,
3. Once this time has elapsed, the indicator light «h»
3. Once this time has elapsed, the indicator light «h»
German degrees
button and within 4 seconds close the door: the timer
PROGRAMS TABLE
Level
Program
PROGRAMS TABLE
«h» switches off.
«h» switches off.
press the DELAY button. To cancel it, press the button
press the DELAY button. To cancel it, press the button
switches off and the wash cycle begins.
will begin counting down.
Program
Soft
0 - 6
PROGRAMS TABLE
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
PROGRAMS TABLE
repeatedly until the selected delayed start indicator light
repeatedly until the selected delayed start indicator light
To adjust the delay time and select a shorter period of time,
Program
To adjust the delay time and select a shorter period of time,
3. Once this time has elapsed, the indicator light «h»
1
Soft
PROGRAMS TABLE
Program
Medium
Program
7 - 11
has been started.
has been started.
«h» switches off.
«h» switches off.
PROGRAMS TABLE
press the DELAY button. To cancel it, press the button
press the DELAY button. To cancel it, press the button
switches off and the wash cycle begins.
Program
PROGRAMS TABLE
Program
2
Medium
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
repeatedly until the selected delayed start indicator light
repeatedly until the selected delayed start indicator light
Average
PROGRAMS TABLE
12 - 17
To adjust the delay time and select a shorter period of time,
Eco
Program
Eco
1
1
1 Eco
Eco
1
Program
Program
has been started.
Eco
has been started.
1
«h» switches off.
«h» switches off.
press the DELAY button. To cancel it, press the button
3
Average
Program
Hard
18 - 34
Eco
1
Program
The DELAY function cannot be set once a wash cycle
Eco
Auto
The DELAY function cannot be set once a wash cycle
2
1
repeatedly until the selected delayed start indicator light
Eco
Eco
1
1
2 Auto
Program
Auto
4
2
Conventional
Hard
Conventional
1
Eco
Very hard
35 - 50
Program
has been started.
has been started.
2
Auto
2
«h» switches off.
Eco
2
1
Auto
Intensive
2
3
wash and dry
Eco
wash and dry
1
5
Very hard
3
Intensive
The DELAY function cannot be set once a wash cycle
Auto
2
Eco
1
Eco
Eco
1
1
3 Intensive
Conventional
Intensive
Conventional
3
Auto
B
2
1
Eco
Program
3
has been started.
Fast wash 30'
Intensive
4
Auto
2
2
2
Eco
1
Fast wash 30'
4
wash and dry
Intensive
wash and dry
3
Auto
• Switch off the appliance by pressing the ON/OFF button.
2
Intensive
Intensive
3
3
Fast wash 30'
4
3
Intensive
Auto
2
4 Fast wash 30'
Fast wash 30'
4
5
Conventional
Conventional
Intensive
3
2
Auto
the lid.
Setting is complete!
Program
5
2
4
Fast wash 30'
2
3
Intensive
5
wash and dry
Fast wash 30'
wash and dry
4
Intensive
3
Intensive
Intensive
3
3
Glass
5
6
Fast wash 30'
4
Intensive
3
Eco
Eco
1
Fast
1
Fast
5 Fast wash and Dry
4
6
Glass
4
5
Fast wash 30'
4
(110 ml) reference notch of the filling space - avoid spilling it.
FILLING THE RINSE AID DISPENSER
Program
Glass
6
5
4
Fast wash 30'
6
Glass
Silent
7
5
Fast wash 30'
If this happens, clean the spill immediately with a dry cloth.
4
Intensive
Intensive
3
3
Silent
7
Glass
6
Rinse aid makes dish DRYING easier. The rinse aid dispenser A
5
Eco
Eco
1
Fast
1
Fast
6 Glass
4
Silent
4
7
Conventional
Conventional
6
Glass
5
Silent
8
7
Sanitizing
Program
Glass
6
Sanitizing
Sanitizing
2
5
5
5
2
should be filled when the RINSE AID REFILL indicator light
Sanitizing
8
7
Silent
wash and dry
wash and dry
6
Glass
8
Sanitizing
Silent
7
Glass
in the control panel is lit.
6
Eco
Eco
1
Fast
Sanitizing
Pre-Wash
1
Fast
7 Silent
4
8
9
4
Conventional
Silent
Conventional
7
Glass
6
9
Pre-Wash
Sanitizing
8
Sanitizing
Sanitizing
5
Silent
5
2
7
2
Pre-Wash
9
Sanitizing
8
7
wash and dry
Silent
wash and dry
Pre-Wash
Pre-Wash
6
Intensive
6
Intensive
3
3
10
9
Self- Clean
Pre-Wash
8
Sanitizing
Silent
7
Self- Clean
10
Eco
1
Pre-Wash
8 Sanitizing
9
Conventional
Sanitizing
Conventional
8
Self- Clean
10
9
Sanitizing
Pre-Wash
Sanitizing
5
Sanitizing
5
2
8
2
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Self- Clean
10
Pre-Wash
9
8
Sanitizing
wash and dry
wash and dry
Pre-Wash
Pre-Wash
6
Intensive
6
Intensive
3
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
3
10
Self- Clean
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address:
9
Pre-Wash
Self-Clean
Self-Clean
7
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Fast
7
Fast
4
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address:
Self- Clean
4
9 Pre-Wash
10
Conventional
Pre-Wash
9
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
10
Self- Clean
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address:
Pre-Wash
9
2
Pre-treatment of the dishes is not needed before any of the programs.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address:
Self- Clean
10
Pre-Wash
wash and dry
Pre-Wash
6
6
Pre-treatment of the dishes is not needed before any of the programs.
Intensive
Intensive
3
3
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
*) Not all options can be used simultaneously.
Self- Clean
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address:
10
Pre-treatment of the dishes is not needed before any of the programs.
Self-Clean
Self-Clean
7
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Fast
7
Fast
10 Self-Clean
4
*) Not all options can be used simultaneously.
4
Self- Clean
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address:
10
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many factors such as temperature
Pre-treatment of the dishes is not needed before any of the programs.
*) Not all options can be used simultaneously.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
5
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many factors such as temperature
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address:
Sanitizing
5
Sanitizing
and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and
Pre-treatment of the dishes is not needed before any of the programs.
*) Not all options can be used simultaneously.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many factors such as temperature
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address:
and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and
Intensive
3
Pre-treatment of the dishes is not needed before any of the programs.
B
sensor calibration.
*) Not all options can be used simultaneously.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many factors such as temperature
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address:
and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and
Self-Clean
Self-Clean
7
7
sensor calibration.
Pre-treatment of the dishes is not needed before any of the programs.
Fast
Fast
4
4
*) Not all options can be used simultaneously.
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many factors such as temperature
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address:
and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and
Pre-treatment of the dishes is not needed before any of the programs.
sensor calibration.
*) Not all options can be used simultaneously.
B
Sanitizing
Sanitizing
5
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
5
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many factors such as temperature
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and
sensor calibration.
Pre-treatment of the dishes is not needed before any of the programs.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
*) Not all options can be used simultaneously.
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many factors such as temperature
PROGRAMS DESCRIPTION
Pre-Wash
Pre-Wash
ECO program data is measured under laboratory conditions
6
6
and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and
sensor calibration.
Pre-treatment of the dishes is not needed before any of the programs.
1. Open the dispenser B by pressing and pulling up the tab on
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
*) Not all options can be used simultaneously.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
PROGRAMS DESCRIPTION
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many factors such as temperature
and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and
Fast
4
sensor calibration.
*) Not all options can be used simultaneously.
1. ECO
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
PROGRAMS DESCRIPTION
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many factors such as temperature
according to European Standard EN 60436:2019.
and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and
sensor calibration.
the lid.
1. ECO
Sanitizing
Sanitizing
5
5
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
PROGRAMS DESCRIPTION
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many factors such as temperature
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Pre-treatment of the dishes is not needed before any of the programs.
bined energy and water consumption, and that it is used to assess compliance with the EU Ecodesign legislation.
Pre-treatment of the dishes is not needed before any of the programs.
and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and
sensor calibration.
1. ECO
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Pre-Wash
Pre-Wash
6
PROGRAMS DESCRIPTION
bined energy and water consumption, and that it is used to assess compliance with the EU Ecodesign legislation.
6
Note for Test Laboratories: For information on comparative
and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and
2. Carefully introduce the rinse aid as far as the maximum
1. ECO
sensor calibration.
2. AUTO - For normally soiled dishes with dried food residues. Senses the level of soiling on the dishes and adjusts the program accor-
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
*) Not all options can be used simultaneously.
PROGRAMS DESCRIPTION
Self-Clean
bined energy and water consumption, and that it is used to assess compliance with the EU Ecodesign legislation.
*) Not all options can be used simultaneously.
Self-Clean
7
7
2. AUTO - For normally soiled dishes with dried food residues. Senses the level of soiling on the dishes and adjusts the program accor-
sensor calibration.
1. ECO
PROGRAMS DESCRIPTION
bined energy and water consumption, and that it is used to assess compliance with the EU Ecodesign legislation.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
dingly. When the sensor is detecting the soil level an animation appears in the display and the cycle duration is updated.
EN testing conditions, please send an email to the following
(110 ml) reference notch of the filling space - avoid spilling it.
Sanitizing
5
2. AUTO - For normally soiled dishes with dried food residues. Senses the level of soiling on the dishes and adjusts the program accor-
1. ECO
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
dingly. When the sensor is detecting the soil level an animation appears in the display and the cycle duration is updated.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Pre-treatment of the dishes is not needed before any of the programs.
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
bined energy and water consumption, and that it is used to assess compliance with the EU Ecodesign legislation.
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Pre-treatment of the dishes is not needed before any of the programs.
PROGRAMS DESCRIPTION
2. AUTO - For normally soiled dishes with dried food residues. Senses the level of soiling on the dishes and adjusts the program accor-
3. INTENSIVE - Program recommended for heavily soiled crockery, especially suitable for pans and saucepans (not to be used for delicate items).
1. ECO
Pre-Wash
Pre-Wash
6
6
dingly. When the sensor is detecting the soil level an animation appears in the display and the cycle duration is updated.
PROGRAMS DESCRIPTION
bined energy and water consumption, and that it is used to assess compliance with the EU Ecodesign legislation.
If this happens, clean the spill immediately with a dry cloth.
3. INTENSIVE - Program recommended for heavily soiled crockery, especially suitable for pans and saucepans (not to be used for delicate items).
2. AUTO - For normally soiled dishes with dried food residues. Senses the level of soiling on the dishes and adjusts the program accor-
1. ECO
dingly. When the sensor is detecting the soil level an animation appears in the display and the cycle duration is updated.
*) Not all options can be used simultaneously.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Self-Clean
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
*) Not all options can be used simultaneously.
Self-Clean
7
4. FAST WASH 30' - Program to be used for half load of lightly-soiled dishes with no dried food residues.
PROGRAMS DESCRIPTION
bined energy and water consumption, and that it is used to assess compliance with the EU Ecodesign legislation.
7
3. INTENSIVE - Program recommended for heavily soiled crockery, especially suitable for pans and saucepans (not to be used for delicate items).
2. AUTO - For normally soiled dishes with dried food residues. Senses the level of soiling on the dishes and adjusts the program accor-
1. ECO
dingly. When the sensor is detecting the soil level an animation appears in the display and the cycle duration is updated.
4. FAST WASH 30' - Program to be used for half load of lightly-soiled dishes with no dried food residues.
3. Press the lid down until you hear a click to close it.
bined energy and water consumption, and that it is used to assess compliance with the EU Ecodesign legislation.
Pre-treatment of the dishes is not needed before any of the
3. INTENSIVE - Program recommended for heavily soiled crockery, especially suitable for pans and saucepans (not to be used for delicate items).
2. AUTO - For normally soiled dishes with dried food residues. Senses the level of soiling on the dishes and adjusts the program accor-
1. ECO
5. FAST WASH AND DRY - Normally soiled crockery. Everyday cycle, that ensures optimal cleaning and drying performance in shorter time.
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
load, load balancing, additional selected options and sensor calibration.
4. FAST WASH 30' - Program to be used for half load of lightly-soiled dishes with no dried food residues.
dingly. When the sensor is detecting the soil level an animation appears in the display and the cycle duration is updated.
load, load balancing, additional selected options and sensor calibration.
bined energy and water consumption, and that it is used to assess compliance with the EU Ecodesign legislation.
5. FAST WASH AND DRY - Normally soiled crockery. Everyday cycle, that ensures optimal cleaning and drying performance in shorter time.
3. INTENSIVE - Program recommended for heavily soiled crockery, especially suitable for pans and saucepans (not to be used for delicate items).
Pre-Wash
6
2. AUTO - For normally soiled dishes with dried food residues. Senses the level of soiling on the dishes and adjusts the program accor-
4. FAST WASH 30' - Program to be used for half load of lightly-soiled dishes with no dried food residues.
NEVER pour the rinse aid directly into the tub.
dingly. When the sensor is detecting the soil level an animation appears in the display and the cycle duration is updated.
bined energy and water consumption, and that it is used to assess compliance with the EU Ecodesign legislation.
6. GLASS - Program for delicate items, which are more sensitive to high temperatures, for example glasses and cups.
programs.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
3. INTENSIVE - Program recommended for heavily soiled crockery, especially suitable for pans and saucepans (not to be used for delicate items).
5. FAST WASH AND DRY - Normally soiled crockery. Everyday cycle, that ensures optimal cleaning and drying performance in shorter time.
*) Not all options can be used simultaneously.
2. AUTO - For normally soiled dishes with dried food residues. Senses the level of soiling on the dishes and adjusts the program accor-
*) Not all options can be used simultaneously.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Self-Clean
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Self-Clean
7
7
6. GLASS - Program for delicate items, which are more sensitive to high temperatures, for example glasses and cups.
4. FAST WASH 30' - Program to be used for half load of lightly-soiled dishes with no dried food residues.
dingly. When the sensor is detecting the soil level an animation appears in the display and the cycle duration is updated.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
5. FAST WASH AND DRY - Normally soiled crockery. Everyday cycle, that ensures optimal cleaning and drying performance in shorter time.
3. INTENSIVE - Program recommended for heavily soiled crockery, especially suitable for pans and saucepans (not to be used for delicate items).
7. SILENT - Suitable for night-time operation of the appliance. Ensures optimal cleaning and drying performance with the lowest noise emission.
2. AUTO - For normally soiled dishes with dried food residues. Senses the level of soiling on the dishes and adjusts the program accor-
4. FAST WASH 30' - Program to be used for half load of lightly-soiled dishes with no dried food residues.
dingly. When the sensor is detecting the soil level an animation appears in the display and the cycle duration is updated.
6. GLASS - Program for delicate items, which are more sensitive to high temperatures, for example glasses and cups.
*) Not all options can be used simultaneously.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
7. SILENT - Suitable for night-time operation of the appliance. Ensures optimal cleaning and drying performance with the lowest noise emission.
5. FAST WASH AND DRY - Normally soiled crockery. Everyday cycle, that ensures optimal cleaning and drying performance in shorter time.
3. INTENSIVE - Program recommended for heavily soiled crockery, especially suitable for pans and saucepans (not to be used for delicate items).
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
load, load balancing, additional selected options and sensor calibration.
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
load, load balancing, additional selected options and sensor calibration.
4. FAST WASH 30' - Program to be used for half load of lightly-soiled dishes with no dried food residues.
6. GLASS - Program for delicate items, which are more sensitive to high temperatures, for example glasses and cups.
dingly. When the sensor is detecting the soil level an animation appears in the display and the cycle duration is updated.
8. SANITIZING - Normally or heavily soiled crockery, with additional antibacterial wash. Can be used to perform maintenance of the
3. INTENSIVE - Program recommended for heavily soiled crockery, especially suitable for pans and saucepans (not to be used for delicate items).
5. FAST WASH AND DRY - Normally soiled crockery. Everyday cycle, that ensures optimal cleaning and drying performance in shorter time.
7. SILENT - Suitable for night-time operation of the appliance. Ensures optimal cleaning and drying performance with the lowest noise emission.
6. GLASS - Program for delicate items, which are more sensitive to high temperatures, for example glasses and cups.
4. FAST WASH 30' - Program to be used for half load of lightly-soiled dishes with no dried food residues.
8. SANITIZING - Normally or heavily soiled crockery, with additional antibacterial wash. Can be used to perform maintenance of the
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
**) Values given for programes other than the eco program are
7. SILENT - Suitable for night-time operation of the appliance. Ensures optimal cleaning and drying performance with the lowest noise emission.
5. FAST WASH AND DRY - Normally soiled crockery. Everyday cycle, that ensures optimal cleaning and drying performance in shorter time.
3. INTENSIVE - Program recommended for heavily soiled crockery, especially suitable for pans and saucepans (not to be used for delicate items).
dishwasher.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Self-Clean
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
7
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
4. FAST WASH 30' - Program to be used for half load of lightly-soiled dishes with no dried food residues.
8. SANITIZING - Normally or heavily soiled crockery, with additional antibacterial wash. Can be used to perform maintenance of the
6. GLASS - Program for delicate items, which are more sensitive to high temperatures, for example glasses and cups.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
dishwasher.
7. SILENT - Suitable for night-time operation of the appliance. Ensures optimal cleaning and drying performance with the lowest noise emission.
5. FAST WASH AND DRY - Normally soiled crockery. Everyday cycle, that ensures optimal cleaning and drying performance in shorter time.
8. SANITIZING - Normally or heavily soiled crockery, with additional antibacterial wash. Can be used to perform maintenance of the
4. FAST WASH 30' - Program to be used for half load of lightly-soiled dishes with no dried food residues.
6. GLASS - Program for delicate items, which are more sensitive to high temperatures, for example glasses and cups.
9. PRE-WASH - Use to refresh crockery planned to be washed later. No detergent to be used with this program.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
indicative only. The actual time may vary depending on many
Pre-treatment of the dishes is not needed before any of the programs.
load, load balancing, additional selected options and sensor calibration.
dishwasher.
Pre-treatment of the dishes is not needed before any of the programs.
load, load balancing, additional selected options and sensor calibration.
5. FAST WASH AND DRY - Normally soiled crockery. Everyday cycle, that ensures optimal cleaning and drying performance in shorter time.
7. SILENT - Suitable for night-time operation of the appliance. Ensures optimal cleaning and drying performance with the lowest noise emission.
9. PRE-WASH - Use to refresh crockery planned to be washed later. No detergent to be used with this program.
8. SANITIZING - Normally or heavily soiled crockery, with additional antibacterial wash. Can be used to perform maintenance of the
6. GLASS - Program for delicate items, which are more sensitive to high temperatures, for example glasses and cups.
dishwasher.
7. SILENT - Suitable for night-time operation of the appliance. Ensures optimal cleaning and drying performance with the lowest noise emission.
5. FAST WASH AND DRY - Normally soiled crockery. Everyday cycle, that ensures optimal cleaning and drying performance in shorter time.
10. SELF-CLEAN - Program to be used to perform maintenance of the dishwasher. It cleans the interior of the appliance using hot water.
9. PRE-WASH - Use to refresh crockery planned to be washed later. No detergent to be used with this program.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
6. GLASS - Program for delicate items, which are more sensitive to high temperatures, for example glasses and cups.
8. SANITIZING - Normally or heavily soiled crockery, with additional antibacterial wash. Can be used to perform maintenance of the
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
*) Not all options can be used simultaneously.
10. SELF-CLEAN - Program to be used to perform maintenance of the dishwasher. It cleans the interior of the appliance using hot water.
dishwasher.
*) Not all options can be used simultaneously.
factors such as temperature and pressure of the incoming
7. SILENT - Suitable for night-time operation of the appliance. Ensures optimal cleaning and drying performance with the lowest noise emission.
9. PRE-WASH - Use to refresh crockery planned to be washed later. No detergent to be used with this program.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
PROGRAMS DESCRIPTION
6. GLASS - Program for delicate items, which are more sensitive to high temperatures, for example glasses and cups.
8. SANITIZING - Normally or heavily soiled crockery, with additional antibacterial wash. Can be used to perform maintenance of the
PROGRAMS DESCRIPTION
10. SELF-CLEAN - Program to be used to perform maintenance of the dishwasher. It cleans the interior of the appliance using hot water.
dishwasher.
7. SILENT - Suitable for night-time operation of the appliance. Ensures optimal cleaning and drying performance with the lowest noise emission.
Notes:
9. PRE-WASH - Use to refresh crockery planned to be washed later. No detergent to be used with this program.
8. SANITIZING - Normally or heavily soiled crockery, with additional antibacterial wash. Can be used to perform maintenance of the
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Pre-treatment of the dishes is not needed before any of the programs.
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
10. SELF-CLEAN - Program to be used to perform maintenance of the dishwasher. It cleans the interior of the appliance using hot water.
dishwasher.
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Pre-treatment of the dishes is not needed before any of the programs.
water, room temperature, amount of detergent, quantity and
7. SILENT - Suitable for night-time operation of the appliance. Ensures optimal cleaning and drying performance with the lowest noise emission.
Notes:
9. PRE-WASH - Use to refresh crockery planned to be washed later. No detergent to be used with this program.
Please note that cycle FAST WASH is dedicated for lightly soiled dishes.
8. SANITIZING - Normally or heavily soiled crockery, with additional antibacterial wash. Can be used to perform maintenance of the
10. SELF-CLEAN - Program to be used to perform maintenance of the dishwasher. It cleans the interior of the appliance using hot water.
dishwasher.
Notes:
Please note that cycle FAST WASH is dedicated for lightly soiled dishes.
9. PRE-WASH - Use to refresh crockery planned to be washed later. No detergent to be used with this program.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
8. SANITIZING - Normally or heavily soiled crockery, with additional antibacterial wash. Can be used to perform maintenance of the
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
*) Not all options can be used simultaneously.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
*) Not all options can be used simultaneously.
10. SELF-CLEAN - Program to be used to perform maintenance of the dishwasher. It cleans the interior of the appliance using hot water.
dishwasher.
type of load, load balancing, additional selected options and
Notes:
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
Please note that cycle FAST WASH is dedicated for lightly soiled dishes.
9. PRE-WASH - Use to refresh crockery planned to be washed later. No detergent to be used with this program.
10. SELF-CLEAN - Program to be used to perform maintenance of the dishwasher. It cleans the interior of the appliance using hot water.
dishwasher.
Notes:
Please note that cycle FAST WASH is dedicated for lightly soiled dishes.
9. PRE-WASH - Use to refresh crockery planned to be washed later. No detergent to be used with this program.
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
load, load balancing, additional selected options and sensor calibration.
Pre-treatment of the dishes is not needed before any of the programs.
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
load, load balancing, additional selected options and sensor calibration.
Pre-treatment of the dishes is not needed before any of the programs.
10. SELF-CLEAN - Program to be used to perform maintenance of the dishwasher. It cleans the interior of the appliance using hot water.
sensor calibration.
Notes:
Please note that cycle FAST WASH is dedicated for lightly soiled dishes.
9. PRE-WASH - Use to refresh crockery planned to be washed later. No detergent to be used with this program.
10. SELF-CLEAN - Program to be used to perform maintenance of the dishwasher. It cleans the interior of the appliance using hot water.
Notes:
Please note that cycle FAST WASH is dedicated for lightly soiled dishes.
*) Not all options can be used simultaneously.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
*) Not all options can be used simultaneously.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
10. SELF-CLEAN - Program to be used to perform maintenance of the dishwasher. It cleans the interior of the appliance using hot water.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
1. ECO - Eco program is suitable to clean normally soiled
Notes:
Please note that cycle FAST WASH is dedicated for lightly soiled dishes.
Notes:
Please note that cycle FAST WASH is dedicated for lightly soiled dishes.
Pre-treatment of the dishes is not needed before any of the programs.
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
Notes:
tableware, that for this use, it is the most efficient program
Please note that cycle FAST WASH is dedicated for lightly soiled dishes.
Please note that cycle FAST WASH is dedicated for lightly soiled dishes.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
*) Not all options can be used simultaneously.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
in terms of its combined energy and water consumption,
load, load balancing, additional selected options and sensor calibration.
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
load, load balancing, additional selected options and sensor calibration.
and that it is used to assess compliance with the EU
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
Ecodesign legislation.
load, load balancing, additional selected options and sensor calibration.
2. AUTO - For normally soiled dishes with dried food residues.
PROGRAMS DESCRIPTION
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
PROGRAMS DESCRIPTION
Senses the level of soiling on the dishes and adjusts the
program accordingly. When the sensor is detecting the
PROGRAMS DESCRIPTION
soil level an animation appears in the display and the cycle
duration is updated.
3. INTENSIVE - Program recommended for heavily soiled
crockery, especially suitable for pans and saucepans (not to
be used for delicate items).
the procedure before the beginning of the washing cycle.
SETTING THE WATER HARDNESS
To allow the water softener to work in a perfect way, it is essential
that the water hardness setting is based on the actual water hard-
ENGLISH
ness in your house. This information can be obtained from your local
water supplier. The factory setting is for average (3) water hardness.
• Switch on the appliance by pressing the ON/OFF button.
• Switch off the appliance by pressing the ON/OFF button.
Make sure the cap is screwed on tightly, so that no detergent can
• Hold down button
get into the container during the wash program (this could damage
• Switch on the appliance by pressing the ON/OFF button.
the water softener beyond repair).
•
The current selection level number and the salt indicator light
As soon as this procedure is complete, run a program without
� � � � � �
loading. The "Pre-Wash" program alone is NOT� � � � � �
•
Press button
to select the desired hardness level (see
s.
Residual saline solution or grains of salt can lead to corrosion,
WATER HARDNESS TABLE).
irreparably damaging the stainless steel components.
The guarantee is not applicable if faults are caused by such
Water Hardness Table
circumstances.
Level
appears on the display; each time you press the button,
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
the time (1h, 2h, etc. up to max. 12h) from the start of
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
°dH
°fH
1
Soft
the selected wash cycle will be increased.
appears on the display; each time you press the button,
heating element may be damaged as a result.
French degrees
the time (1h, 2h, etc. up to max. 12h) from the start of
2
Medium
Whenever you need to add salt, it is mandatory to complete
0 - 6
0 - 10
button and within 4 seconds close the door: the timer
the selected wash cycle will be increased.
appears on the display; each time you press the button,
the procedure before the beginning of the washing cycle.
3
Average
will begin counting down.
the time (1h, 2h, etc. up to max. 12h) from the start of
7 - 11
11 - 20
4
Hard
button and within 4 seconds close the door: the timer
the selected wash cycle will be increased.
SETTING THE WATER HARDNESS
12 - 17
21 - 30
switches off and the wash cycle begins.
will begin counting down.
5
To allow the water softener to work in a perfect way, it is essential
Very hard
18 - 34
31 - 60
button and within 4 seconds close the door: the timer
To open the detergent dispenser
that the water hardness setting is based on the actual water hard-
appears on the display; each time you press the button,
To open the detergent dispenser
press button C.
switches off and the wash cycle begins.
will begin counting down.
• Switch off the appliance by pressing the ON/OFF button.
ness in your house. This information can be obtained from your local
the time (1h, 2h, etc. up to max. 12h) from the start of
To open the detergent dispenser
35 - 50
press button C.
61 - 90
To open the detergent dispenser
Introduce the detergent into
press button C.
Setting is complete!
Introduce the detergent into
water supplier. The factory setting is for average (3) water hardness.
the selected wash cycle will be increased.
again for 6 seconds to reach the
appears on the display; each time you press the button,
To open the detergent dispenser
the dry dispenser D only.
press button C.
for 5 seconds, until you hear a beep.
D
Introduce the detergent into
To open the detergent dispenser
the dry dispenser D only.
press button C.
switches off and the wash cycle begins.
Introduce the detergent into
the time (1h, 2h, etc. up to max. 12h) from the start of
Place the amount of detergent
To open the detergent dispenser
the dry dispenser D only.
press button C.
Place the amount of detergent
Introduce the detergent into
• Switch on the appliance by pressing the ON/OFF button.
the dry dispenser D only.
for pre-washing directly inside
To open the detergent dispenser
press button C.
C
button and within 4 seconds close the door: the timer
FILLING THE RINSE AID DISPENSER
the selected wash cycle will be increased.
D
Place the amount of detergent
appears on the display; each time you press the button,
for pre-washing directly inside
Introduce the detergent into
the dry dispenser D only.
To open the detergent dispenser
the tub.
press button C.
D
Place the amount of detergent
• Switch off the appliance by pressing the ON/OFF button.
D
Introduce the detergent into
To open the detergent dispenser
for pre-washing directly inside
the dry dispenser D only.
the tub.
press button C.
will begin counting down.
the time (1h, 2h, etc. up to max. 12h) from the start of
Place the amount of detergent
for pre-washing directly inside
Introduce the detergent into
the dry dispenser D only.
Rinse aid makes dish DRYING easier. The rinse aid dispenser A
C
press button C.
the tub.
• Hold down button
Place the amount of detergent
Introduce the detergent into
for pre-washing directly inside
the dry dispenser D only.
the tub.
C
button and within 4 seconds close the door: the timer
C
the selected wash cycle will be increased.
Place the amount of detergent
D
Introduce the detergent into
for pre-washing directly inside
should be filled when the RINSE AID REFILL indicator light
the tub.
the dry dispenser D only.
D
• Switch on the appliance by pressing the ON/OFF button.
D
Place the amount of detergent
D
for pre-washing directly inside
switches off and the wash cycle begins.
the dry dispenser D only.
will begin counting down.
the tub.
Place the amount of detergent
for pre-washing directly inside
in the control panel is lit.
the tub.
•
The current selection level number and the salt indicator light
C
Place the amount of detergent
C
for pre-washing directly inside
button and within 4 seconds close the door: the timer
C
the tub.
C
for pre-washing directly inside
� � � � � �
the tub.
D
switches off and the wash cycle begins.
°dH
will begin counting down.
°fH
the tub.
PROGRAMS TABLE
•
Press button
C
French degrees
°dH
D
WATER HARDNESS TABLE).
Program
Drying
PROGRAMS TABLE
switches off and the wash cycle begins.
German degrees
French degrees
PROGRAMS TABLE
0 - 10
PROGRAMS TABLE
C
Available
phase
Program
Available
0 - 6
0 - 10
options
Program
11 - 20
Available
PROGRAMS TABLE
options
Available
PROGRAMS TABLE
PROGRAMS TABLE
options
PROGRAMS TABLE
Program
7 - 11
11 - 20
Available
options
21 - 30
Program
Program
50°
50°
50°
Eco
Available
1
options
Program
Available
options
12 - 17
21 - 30
31 - 60
PROGRAMS TABLE
Available
options
1
Program
Auto
1
2
Eco
Available
Program
options
Program
50°
50°
50-60°
Program
Eco
1
18 - 34
Eco
31 - 60
B
Available
1
61 - 90
options
PROGRAMS TABLE
55°
55°
2
options
3
Auto
Intensive
2
1. Open the dispenser B by pressing and pulling up the tab on
35 - 50
A
61 - 90
Auto
2
Auto
2
Eco
1
50°
Program
50°
65°
3
1
Eco
Eco
1
the lid.
Eco
1
Program
Fast wash 30'
-
4
Intensive
-
3
55°
55°
Intensive
-
-
3
3
Intensive
2. Carefully introduce the rinse aid as far as the maximum
Auto
2
65°
4
65°
Program
Auto
-
2
-
Auto
2
2
Auto
50°
-
-
-
4
5
Fast wash 30'
1
Eco
(110 ml) reference notch of the filling space - avoid spilling it.
Program
4
Fast wash 30'
Fast wash 30'
-
55°
55°
4
-
5
3
Intensive
Intensive
3
3
Intensive
If this happens, clean the spill immediately with a dry cloth.
-
-
Intensive
3
65°
65°
6
Glass
5
-
Auto
Eco
-
2
1
-
50°
50°
50°
50°
5
50°
5
3. Press the lid down until you hear a click to close it.
Fast wash 30'
4
-
-
Program
4
Fast wash 30'
Fast wash 30'
• Switch off the appliance by pressing the ON/OFF button.
4
Fast wash 30'
-
4
-
Silent
7
Glass
NEVER pour the rinse aid directly into the tub.
6
3
Intensive
Auto
-
2
-
65°
65°
Glass
6
6
Glass
Setting is complete!
5
-
50°
50°
50°
50°
5
45°
5
5
Sanitizing
8
7
Silent
-
Fast wash 30'
3
4
Intensive
55°
65°
65°
55°
7
Silent
-
Silent
7
6
Glass
Glass
6
-
6
Glass
Glass
FILLING THE RINSE AID DISPENSER
6
-
9
Sanitizing
Pre-Wash
-
50°
50°
-
-
50°
50°
8
50°
Fast wash 30'
4
5
Sanitizing
-
8
-
Sanitizing
-
8
Silent
65°
65°
7
55°
55°
7
Silent
-
Rinse aid makes dish DRYING easier. The rinse aid dispenser A
-
Silent
7
-
Silent
7
-
-
65°
65°
Self- Clean
-
-
10
Pre-Wash
-
-
9
6
Glass
-
5
Pre-Wash
-
-
9
-
50°
should be filled when the RINSE AID REFILL indicator light
9
Pre-Wash
-
Sanitizing
65°
8
-
Sanitizing
-
8
-
Sanitizing
-
8
65°
-
65°
8
Sanitizing
55°
-
55°
-
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Self- Clean
-
10
in the control panel is lit.
Silent
-
-
7
6
Glass
-
-
-
65°
65°
10
Self- Clean
Self- Clean
-
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address:
10
-
9
Pre-Wash
-
-
-
-
Pre-Wash
65°
65°
9
-
50°
50°
9
Pre-Wash
-
Pre-Wash
-
-
9
-
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
-
Silent
Sanitizing
-
7
8
-
-
55°
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Self- Clean
-
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address:
10
-
-
-
65°
65°
10
Self- Clean
Self- Clean
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address:
*) Not all options can be used simultaneously.
10
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address:
Self- Clean
-
-
10
-
-
65°
65°
50°
50°
9
Sanitizing
Pre-Wash
65°
-
-
8
-
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many factors such as temperature
Pre-treatment of the dishes is not needed before any of the programs.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
65°
65°
A
and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
*) Not all options can be used simultaneously.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address:
65°
sensor calibration.
*) Not all options can be used simultaneously.
Self- Clean
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address:
10
9
Pre-Wash
*) Not all options can be used simultaneously.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address:
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many factors such as temperature
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address:
A
65°
-
-
65°
50°
50°
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many factors such as temperature
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many factors such as temperature
and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and
Pre-treatment of the dishes is not needed before any of the programs.
65°
65°
and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and
sensor calibration.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Self- Clean
Pre-treatment of the dishes is not needed before any of the programs.
10
*) Not all options can be used simultaneously.
-
PROGRAMS DESCRIPTION
-
sensor calibration.
*) Not all options can be used simultaneously.
sensor calibration.
*) Not all options can be used simultaneously.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address:
*) Not all options can be used simultaneously.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many factors such as temperature
-
50°
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many factors such as temperature
1. ECO
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many factors such as temperature
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many factors such as temperature
and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
65°
65°
PROGRAMS DESCRIPTION
and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and
bined energy and water consumption, and that it is used to assess compliance with the EU Ecodesign legislation.
and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and
Pre-treatment of the dishes is not needed before any of the programs.
and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address:
sensor calibration.
PROGRAMS DESCRIPTION
-
-
PROGRAMS DESCRIPTION
sensor calibration.
sensor calibration.
*) Not all options can be used simultaneously.
1. ECO
sensor calibration.
2. AUTO - For normally soiled dishes with dried food residues. Senses the level of soiling on the dishes and adjusts the program accor-
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
-
65°
65°
1. ECO
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
1. ECO
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many factors such as temperature
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
bined energy and water consumption, and that it is used to assess compliance with the EU Ecodesign legislation.
dingly. When the sensor is detecting the soil level an animation appears in the display and the cycle duration is updated.
Pre-treatment of the dishes is not needed before any of the programs.
65°
1. Open the dispenser B by pressing and pulling up the tab on
bined energy and water consumption, and that it is used to assess compliance with the EU Ecodesign legislation.
PROGRAMS DESCRIPTION
and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and
bined energy and water consumption, and that it is used to assess compliance with the EU Ecodesign legislation.
*) Not all options can be used simultaneously.
3. INTENSIVE - Program recommended for heavily soiled crockery, especially suitable for pans and saucepans (not to be used for delicate items).
2. AUTO - For normally soiled dishes with dried food residues. Senses the level of soiling on the dishes and adjusts the program accor-
PROGRAMS DESCRIPTION
-
-
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
sensor calibration.
2. AUTO - For normally soiled dishes with dried food residues. Senses the level of soiling on the dishes and adjusts the program accor-
2. AUTO - For normally soiled dishes with dried food residues. Senses the level of soiling on the dishes and adjusts the program accor-
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many factors such as temperature
1. ECO
dingly. When the sensor is detecting the soil level an animation appears in the display and the cycle duration is updated.
the lid.
-
4. FAST WASH 30' - Program to be used for half load of lightly-soiled dishes with no dried food residues.
65°
65°
1. ECO
1. ECO
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
1. ECO
and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and
dingly. When the sensor is detecting the soil level an animation appears in the display and the cycle duration is updated.
dingly. When the sensor is detecting the soil level an animation appears in the display and the cycle duration is updated.
bined energy and water consumption, and that it is used to assess compliance with the EU Ecodesign legislation.
3. INTENSIVE - Program recommended for heavily soiled crockery, especially suitable for pans and saucepans (not to be used for delicate items).
5. FAST WASH AND DRY - Normally soiled crockery. Everyday cycle, that ensures optimal cleaning and drying performance in shorter time.
bined energy and water consumption, and that it is used to assess compliance with the EU Ecodesign legislation.
2. Carefully introduce the rinse aid as far as the maximum
bined energy and water consumption, and that it is used to assess compliance with the EU Ecodesign legislation.
sensor calibration.
bined energy and water consumption, and that it is used to assess compliance with the EU Ecodesign legislation.
3. INTENSIVE - Program recommended for heavily soiled crockery, especially suitable for pans and saucepans (not to be used for delicate items).
3. INTENSIVE - Program recommended for heavily soiled crockery, especially suitable for pans and saucepans (not to be used for delicate items).
-
2. AUTO - For normally soiled dishes with dried food residues. Senses the level of soiling on the dishes and adjusts the program accor-
-
PROGRAMS DESCRIPTION
4. FAST WASH 30' - Program to be used for half load of lightly-soiled dishes with no dried food residues.
6. GLASS - Program for delicate items, which are more sensitive to high temperatures, for example glasses and cups.
2. AUTO - For normally soiled dishes with dried food residues. Senses the level of soiling on the dishes and adjusts the program accor-
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
2. AUTO - For normally soiled dishes with dried food residues. Senses the level of soiling on the dishes and adjusts the program accor-
(110 ml) reference notch of the filling space - avoid spilling it.
2. AUTO - For normally soiled dishes with dried food residues. Senses the level of soiling on the dishes and adjusts the program accor-
-
4. FAST WASH 30' - Program to be used for half load of lightly-soiled dishes with no dried food residues.
65°
65°
dingly. When the sensor is detecting the soil level an animation appears in the display and the cycle duration is updated.
4. FAST WASH 30' - Program to be used for half load of lightly-soiled dishes with no dried food residues.
1. ECO
5. FAST WASH AND DRY - Normally soiled crockery. Everyday cycle, that ensures optimal cleaning and drying performance in shorter time.
dingly. When the sensor is detecting the soil level an animation appears in the display and the cycle duration is updated.
7. SILENT - Suitable for night-time operation of the appliance. Ensures optimal cleaning and drying performance with the lowest noise emission.
dingly. When the sensor is detecting the soil level an animation appears in the display and the cycle duration is updated.
dingly. When the sensor is detecting the soil level an animation appears in the display and the cycle duration is updated.
5. FAST WASH AND DRY - Normally soiled crockery. Everyday cycle, that ensures optimal cleaning and drying performance in shorter time.
5. FAST WASH AND DRY - Normally soiled crockery. Everyday cycle, that ensures optimal cleaning and drying performance in shorter time.
3. INTENSIVE - Program recommended for heavily soiled crockery, especially suitable for pans and saucepans (not to be used for delicate items).
If this happens, clean the spill immediately with a dry cloth.
PROGRAMS DESCRIPTION
bined energy and water consumption, and that it is used to assess compliance with the EU Ecodesign legislation.
6. GLASS - Program for delicate items, which are more sensitive to high temperatures, for example glasses and cups.
3. INTENSIVE - Program recommended for heavily soiled crockery, especially suitable for pans and saucepans (not to be used for delicate items).
8. SANITIZING - Normally or heavily soiled crockery, with additional antibacterial wash. Can be used to perform maintenance of the
3. INTENSIVE - Program recommended for heavily soiled crockery, especially suitable for pans and saucepans (not to be used for delicate items).
3. INTENSIVE - Program recommended for heavily soiled crockery, especially suitable for pans and saucepans (not to be used for delicate items).
6. GLASS - Program for delicate items, which are more sensitive to high temperatures, for example glasses and cups.
4. FAST WASH 30' - Program to be used for half load of lightly-soiled dishes with no dried food residues.
6. GLASS - Program for delicate items, which are more sensitive to high temperatures, for example glasses and cups.
2. AUTO - For normally soiled dishes with dried food residues. Senses the level of soiling on the dishes and adjusts the program accor-
1. ECO
3. Press the lid down until you hear a click to close it.
7. SILENT - Suitable for night-time operation of the appliance. Ensures optimal cleaning and drying performance with the lowest noise emission.
dishwasher.
4. FAST WASH 30' - Program to be used for half load of lightly-soiled dishes with no dried food residues.
65°
-
4. FAST WASH 30' - Program to be used for half load of lightly-soiled dishes with no dried food residues.
4. FAST WASH 30' - Program to be used for half load of lightly-soiled dishes with no dried food residues.
7. SILENT - Suitable for night-time operation of the appliance. Ensures optimal cleaning and drying performance with the lowest noise emission.
5. FAST WASH AND DRY - Normally soiled crockery. Everyday cycle, that ensures optimal cleaning and drying performance in shorter time.
7. SILENT - Suitable for night-time operation of the appliance. Ensures optimal cleaning and drying performance with the lowest noise emission.
bined energy and water consumption, and that it is used to assess compliance with the EU Ecodesign legislation.
dingly. When the sensor is detecting the soil level an animation appears in the display and the cycle duration is updated.
9. PRE-WASH - Use to refresh crockery planned to be washed later. No detergent to be used with this program.
8. SANITIZING - Normally or heavily soiled crockery, with additional antibacterial wash. Can be used to perform maintenance of the
NEVER pour the rinse aid directly into the tub.
5. FAST WASH AND DRY - Normally soiled crockery. Everyday cycle, that ensures optimal cleaning and drying performance in shorter time.
5. FAST WASH AND DRY - Normally soiled crockery. Everyday cycle, that ensures optimal cleaning and drying performance in shorter time.
5. FAST WASH AND DRY - Normally soiled crockery. Everyday cycle, that ensures optimal cleaning and drying performance in shorter time.
8. SANITIZING - Normally or heavily soiled crockery, with additional antibacterial wash. Can be used to perform maintenance of the
6. GLASS - Program for delicate items, which are more sensitive to high temperatures, for example glasses and cups.
2. AUTO - For normally soiled dishes with dried food residues. Senses the level of soiling on the dishes and adjusts the program accor-
3. INTENSIVE - Program recommended for heavily soiled crockery, especially suitable for pans and saucepans (not to be used for delicate items).
8. SANITIZING - Normally or heavily soiled crockery, with additional antibacterial wash. Can be used to perform maintenance of the
dishwasher.
10. SELF-CLEAN - Program to be used to perform maintenance of the dishwasher. It cleans the interior of the appliance using hot water.
6. GLASS - Program for delicate items, which are more sensitive to high temperatures, for example glasses and cups.
6. GLASS - Program for delicate items, which are more sensitive to high temperatures, for example glasses and cups.
6. GLASS - Program for delicate items, which are more sensitive to high temperatures, for example glasses and cups.
dishwasher.
dishwasher.
dingly. When the sensor is detecting the soil level an animation appears in the display and the cycle duration is updated.
7. SILENT - Suitable for night-time operation of the appliance. Ensures optimal cleaning and drying performance with the lowest noise emission.
4. FAST WASH 30' - Program to be used for half load of lightly-soiled dishes with no dried food residues.
9. PRE-WASH - Use to refresh crockery planned to be washed later. No detergent to be used with this program.
7. SILENT - Suitable for night-time operation of the appliance. Ensures optimal cleaning and drying performance with the lowest noise emission.
7. SILENT - Suitable for night-time operation of the appliance. Ensures optimal cleaning and drying performance with the lowest noise emission.
7. SILENT - Suitable for night-time operation of the appliance. Ensures optimal cleaning and drying performance with the lowest noise emission.
9. PRE-WASH - Use to refresh crockery planned to be washed later. No detergent to be used with this program.
Notes:
9. PRE-WASH - Use to refresh crockery planned to be washed later. No detergent to be used with this program.
3. INTENSIVE - Program recommended for heavily soiled crockery, especially suitable for pans and saucepans (not to be used for delicate items).
8. SANITIZING - Normally or heavily soiled crockery, with additional antibacterial wash. Can be used to perform maintenance of the
5. FAST WASH AND DRY - Normally soiled crockery. Everyday cycle, that ensures optimal cleaning and drying performance in shorter time.
10. SELF-CLEAN - Program to be used to perform maintenance of the dishwasher. It cleans the interior of the appliance using hot water.
8. SANITIZING - Normally or heavily soiled crockery, with additional antibacterial wash. Can be used to perform maintenance of the
Please note that cycle FAST WASH is dedicated for lightly soiled dishes.
8. SANITIZING - Normally or heavily soiled crockery, with additional antibacterial wash. Can be used to perform maintenance of the
8. SANITIZING - Normally or heavily soiled crockery, with additional antibacterial wash. Can be used to perform maintenance of the
10. SELF-CLEAN - Program to be used to perform maintenance of the dishwasher. It cleans the interior of the appliance using hot water.
4. FAST WASH 30' - Program to be used for half load of lightly-soiled dishes with no dried food residues.
10. SELF-CLEAN - Program to be used to perform maintenance of the dishwasher. It cleans the interior of the appliance using hot water.
dishwasher.
6. GLASS - Program for delicate items, which are more sensitive to high temperatures, for example glasses and cups.
dishwasher.
dishwasher.
dishwasher.
Notes:
9. PRE-WASH - Use to refresh crockery planned to be washed later. No detergent to be used with this program.
5. FAST WASH AND DRY - Normally soiled crockery. Everyday cycle, that ensures optimal cleaning and drying performance in shorter time.
7. SILENT - Suitable for night-time operation of the appliance. Ensures optimal cleaning and drying performance with the lowest noise emission.
Notes:
9. PRE-WASH - Use to refresh crockery planned to be washed later. No detergent to be used with this program.
Notes:
Please note that cycle FAST WASH is dedicated for lightly soiled dishes.
9. PRE-WASH - Use to refresh crockery planned to be washed later. No detergent to be used with this program.
9. PRE-WASH - Use to refresh crockery planned to be washed later. No detergent to be used with this program.
10. SELF-CLEAN - Program to be used to perform maintenance of the dishwasher. It cleans the interior of the appliance using hot water.
6. GLASS - Program for delicate items, which are more sensitive to high temperatures, for example glasses and cups.
Please note that cycle FAST WASH is dedicated for lightly soiled dishes.
Please note that cycle FAST WASH is dedicated for lightly soiled dishes.
8. SANITIZING - Normally or heavily soiled crockery, with additional antibacterial wash. Can be used to perform maintenance of the
10. SELF-CLEAN - Program to be used to perform maintenance of the dishwasher. It cleans the interior of the appliance using hot water.
10. SELF-CLEAN - Program to be used to perform maintenance of the dishwasher. It cleans the interior of the appliance using hot water.
10. SELF-CLEAN - Program to be used to perform maintenance of the dishwasher. It cleans the interior of the appliance using hot water.
7. SILENT - Suitable for night-time operation of the appliance. Ensures optimal cleaning and drying performance with the lowest noise emission.
dishwasher.
Notes:
Notes:
8. SANITIZING - Normally or heavily soiled crockery, with additional antibacterial wash. Can be used to perform maintenance of the
Notes:
9. PRE-WASH - Use to refresh crockery planned to be washed later. No detergent to be used with this program.
Notes:
Please note that cycle FAST WASH is dedicated for lightly soiled dishes.
Please note that cycle FAST WASH is dedicated for lightly soiled dishes.
Please note that cycle FAST WASH is dedicated for lightly soiled dishes.
Please note that cycle FAST WASH is dedicated for lightly soiled dishes.
dishwasher.
10. SELF-CLEAN - Program to be used to perform maintenance of the dishwasher. It cleans the interior of the appliance using hot water.
9. PRE-WASH - Use to refresh crockery planned to be washed later. No detergent to be used with this program.
Notes:
10. SELF-CLEAN - Program to be used to perform maintenance of the dishwasher. It cleans the interior of the appliance using hot water.
Please note that cycle FAST WASH is dedicated for lightly soiled dishes.
Notes:
Please note that cycle FAST WASH is dedicated for lightly soiled dishes.
Whenever you need to add salt, it is mandatory to complete
Setting is complete!
the procedure before the beginning of the washing cycle.
If the rinse aid level is set to ZERO (ECO), no rinse aid will be
supplied. The LOW RINSE AID indicator light will not be lit if you
SETTING THE WATER HARDNESS
run out of rinse aid. A maximum of 5 levels can be set according to
To allow the water softener to work in a perfect way, it is essential
the dishwasher model. The factory setting is specific to the model,
ADJUSTING THE DOSAGE OF RINSE AID
that the water hardness setting is based on the actual water hard-
please follow instruction above to check this for your machine.
ADJUSTING THE DOSAGE OF RINSE AID
If you are not completely satisfied with the drying results, you can
ness in your house. This information can be obtained from your local
• If you see bluish streaks on the dishes, set a low number (1-2).
adjust the quantity of rinse aid used.
If you are not completely satisfied with the drying results, you can
water supplier. The factory setting is for average (3) water hardness.
• If there are drops of water or limescale marks on the dishes,
• Switch the dishwasher on using the ON/OFF button.
adjust the quantity of rinse aid used.
set a high number (3-4).
• Switch on the appliance by pressing the ON/OFF button.
• Switch it off using the ON/OFF button.
• Switch the dishwasher on using the ON/OFF button.
until you
To confirm the change and exit from the Control Menu
for 5 seconds, until you hear a beep.
• Switch off the appliance by pressing the ON/OFF button.
• Press button
three times - a beep will be heard.
• Switch it off using the ON/OFF button.
please press and hold
• Hold down button
• Switch it on using the ON/OFF button.
• Press button
FILLING THE DETERGENT DISPENSER
• Switch on the appliance by pressing the ON/OFF button.
•
The current selection level number and rinse aid indicator light flash.
• Switch it on using the ON/OFF button.
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
•
•
Press button
to select the level of rinse aid quantity to be
•
The current selection level number and rinse aid indicator light flash.
dishwashers.
supplied.
•
Press button
To achieve the best washing and drying results, the combined
•
• Switch it off using the ON/OFF button.
supplied.
s.
useof detergent, rinse aid liquid and refined salt is required.
Setting is complete!
• Switch it off using the ON/OFF button.
NaturalDry
NaturalDry
We recommend using detergents that do not contain phosphates
Setting is complete!
If the rinse aid level is set to ZERO (ECO), no rinse aid will be
Door opening system NaturalDry is a convection drying system
Door opening system NaturalDry is a convection drying system
°dH
or chlorine, as these products are harmful to the environment.
NaturalDry
NaturalDry
supplied. The LOW RINSE AID indicator light will not be lit if you
If the rinse aid level is set to ZERO (ECO), no rinse aid will be
which automatically opens the door during/after drying phase to
which automatically opens the door during/after drying phase to
Good washing results also depend on the correct amount of
German degrees
French degrees
run out of rinse aid. A maximum of 5 levels can be set according to
supplied. The LOW RINSE AID indicator light will not be lit if you
ensure exceptional drying performance every day. Door opens at
ensure exceptional drying performance every day. Door opens at
Door opening system NaturalDry is a convection drying system
Door opening system NaturalDry is a convection drying system
detergent being used.
0 - 6
NaturalDry
NaturalDry
the dishwasher model. The factory setting is specific to the model,
the temperature that is safe to your kitchen furniture.
the temperature that is safe to your kitchen furniture.
run out of rinse aid. A maximum of 5 levels can be set according to
which automatically opens the door during/after drying phase to
which automatically opens the door during/after drying phase to
Exceeding the stated amount does not result in a more effective
As additional steam protection, special designed protection foil is
As additional steam protection, special designed protection foil is
please follow instruction above to check this for your machine.
7 - 11
the dishwasher model. The factory setting is specific to the model,
ensure exceptional drying performance every day. Door opens at
ensure exceptional drying performance every day. Door opens at
Door opening system NaturalDry is a convection drying system
Door opening system NaturalDry is a convection drying system
wash and increases environmental pollution.
added together with the dishwasher. To see how to mount protec-
added together with the dishwasher. To see how to mount protec-
• If you see bluish streaks on the dishes, set a low number (1-2).
the temperature that is safe to your kitchen furniture.
the temperature that is safe to your kitchen furniture.
please follow instruction above to check this for your machine.
which automatically opens the door during/after drying phase to
which automatically opens the door during/after drying phase to
12 - 17
The amount can be adjusted to the soil level. In the case of
tion foil please refer to (INSTALLATION GUIDE).
tion foil please refer to (INSTALLATION GUIDE).
• If there are drops of water or limescale marks on the dishes,
As additional steam protection, special designed protection foil is
As additional steam protection, special designed protection foil is
• If you see bluish streaks on the dishes, set a low number (1-2).
ensure exceptional drying performance every day. Door opens at
ensure exceptional drying performance every day. Door opens at
normally soiled items, use approximately either 35g (powder
18 - 34
NaturalDry functionality could be disabled by the user as follows:
NaturalDry functionality could be disabled by the user as follows:
Silent 50° (Night program)
added together with the dishwasher. To see how to mount protec-
added together with the dishwasher. To see how to mount protec-
set a high number (3-4).
• If there are drops of water or limescale marks on the dishes,
NaturalDry
the temperature that is safe to your kitchen furniture.
the temperature that is safe to your kitchen furniture.
NaturalDry
detergent) or 35ml (liquid detergent) and additional tea spoon of
1. Go to the Dishwasher software menu pressing and holding
1. Go to the Dishwasher software menu pressing and holding
tion foil please refer to (INSTALLATION GUIDE).
tion foil please refer to (INSTALLATION GUIDE).
As additional steam protection, special designed protection foil is
As additional steam protection, special designed protection foil is
35 - 50
set a high number (3-4).
Door opening system NaturalDry is a convection drying system
Door opening system NaturalDry is a convection drying system
button (6 sec).
button (6 sec).
detergent directly inside the tub. If tablets are used, one tablet
NaturalDry functionality could be disabled by the user as follows:
NaturalDry functionality could be disabled by the user as follows:
added together with the dishwasher. To see how to mount protec-
added together with the dishwasher. To see how to mount protec-
To open the detergent dispenser
1. When measuring out the detergent refer to the mentioned ear-
1. When measuring out the detergent refer to the mentioned ear-
NaturalDry
NaturalDry
which automatically opens the door during/after drying phase to
which automatically opens the door during/after drying phase to
FILLING THE DETERGENT DISPENSER
1. When measuring out the detergent refer to the mentioned ear-
2. You switched to NaturalDry Control Menu, you could change
2. You switched to NaturalDry Control Menu, you could change
press button C.
will be enough.
lier information to add the proper quantity. Inside the dispenser
lier information to add the proper quantity. Inside the dispenser
1. Go to the Dishwasher software menu pressing and holding
1. Go to the Dishwasher software menu pressing and holding
tion foil please refer to (INSTALLATION GUIDE).
tion foil please refer to (INSTALLATION GUIDE).
1. When measuring out the detergent refer to the mentioned ear-
ensure exceptional drying performance every day. Door opens at
ensure exceptional drying performance every day. Door opens at
lier information to add the proper quantity. Inside the dispenser
Door opening system NaturalDry is a convection drying system
Door opening system NaturalDry is a convection drying system
C there are indications to help the detergent dosing.
C there are indications to help the detergent dosing.
Introduce the detergent into
1. When measuring out the detergent refer to the mentioned ear-
To open the detergent dispenser
status of NaturalDry functionality by pressing
1. When measuring out the detergent refer to the mentioned ear-
status of NaturalDry functionality by pressing
FILLING THE DETERGENT DISPENSER
If the crockery is only lightly soiled or if it has been rinsed with
button (6 sec).
button (6 sec).
lier information to add the proper quantity. Inside the dispenser
NaturalDry functionality could be disabled by the user as follows:
NaturalDry functionality could be disabled by the user as follows:
C there are indications to help the detergent dosing.
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
• Switch off the appliance by pressing the ON/OFF button.
To open the detergent dispenser
2. Remove detergent residues from the edges of the dispenser
2. Remove detergent residues from the edges of the dispenser
1. When measuring out the detergent refer to the mentioned ear-
To open the detergent dispenser
NaturalDry
the temperature that is safe to your kitchen furniture.
1. When measuring out the detergent refer to the mentioned ear-
NaturalDry
the temperature that is safe to your kitchen furniture.
1. When measuring out the detergent refer to the mentioned ear-
press button C.
the dry dispenser D only.
lier information to add the proper quantity. Inside the dispenser
lier information to add the proper quantity. Inside the dispenser
which automatically opens the door during/after drying phase to
which automatically opens the door during/after drying phase to
E
E
C there are indications to help the detergent dosing.
– enabled
2. Remove detergent residues from the edges of the dispenser
2. You switched to NaturalDry Control Menu, you could change
2. You switched to NaturalDry Control Menu, you could change
press button C.
water before being placed in the dishwasher, reduce the amount
1. When measuring out the detergent refer to the mentioned ear-
and close the cover until it clicks.
lier information to add the proper quantity. Inside the dispenser
and close the cover until it clicks.
1. Go to the Dishwasher software menu pressing and holding
1. Go to the Dishwasher software menu pressing and holding
press button C.
lier information to add the proper quantity. Inside the dispenser
lier information to add the proper quantity. Inside the dispenser
C there are indications to help the detergent dosing.
C there are indications to help the detergent dosing.
dishwashers.
Setting is complete!
Introduce the detergent into
Place the amount of detergent
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
As additional steam protection, special designed protection foil is
As additional steam protection, special designed protection foil is
2. Remove detergent residues from the edges of the dispenser
1. When measuring out the detergent refer to the mentioned ear-
and close the cover until it clicks.
ensure exceptional drying performance every day. Door opens at
ensure exceptional drying performance every day. Door opens at
3. Close the lid of the detergent dispenser by pulling it up until
lier information to add the proper quantity. Inside the dispenser
Door opening system NaturalDry is a convection drying system
3. Close the lid of the detergent dispenser by pulling it up until
Door opening system NaturalDry is a convection drying system
C there are indications to help the detergent dosing.
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
C there are indications to help the detergent dosing.
C there are indications to help the detergent dosing.
Introduce the detergent into
2. Remove detergent residues from the edges of the dispenser
status of NaturalDry functionality by pressing
2. Remove detergent residues from the edges of the dispenser
status of NaturalDry functionality by pressing
Introduce the detergent into
To open the detergent dispenser
for pre-washing directly inside
of detergent used accordingly (minimum 25 g/ml) e.g. skip the
button (6 sec).
1. When measuring out the detergent refer to the mentioned ear-
button (6 sec).
the dry dispenser D only.
1. When measuring out the detergent refer to the mentioned ear-
and close the cover until it clicks.
lier information to add the proper quantity. Inside the dispenser
3. Close the lid of the detergent dispenser by pulling it up until
* depending on settings
To achieve the best washing and drying results, the combined
C there are indications to help the detergent dosing.
dishwashers.
added together with the dishwasher. To see how to mount protec-
2. Remove detergent residues from the edges of the dispenser
added together with the dishwasher. To see how to mount protec-
the closing device is secured in place.
To open the detergent dispenser
the closing device is secured in place.
1. When measuring out the detergent refer to the mentioned ear-
To open the detergent dispenser
2. Remove detergent residues from the edges of the dispenser
NaturalDry
the temperature that is safe to your kitchen furniture.
2. Remove detergent residues from the edges of the dispenser
1. When measuring out the detergent refer to the mentioned ear-
the temperature that is safe to your kitchen furniture.
the dry dispenser D only.
and close the cover until it clicks.
and close the cover until it clicks.
To open the detergent dispenser
1. When measuring out the detergent refer to the mentioned ear-
the dry dispenser D only.
1. When measuring out the detergent refer to the mentioned ear-
which automatically opens the door during/after drying phase to
which automatically opens the door during/after drying phase to
the tub.
press button C.
3. Close the lid of the detergent dispenser by pulling it up until
press and hold
E
press and hold
lier information to add the proper quantity. Inside the dispenser
E
lier information to add the proper quantity. Inside the dispenser
the closing device is secured in place.
C there are indications to help the detergent dosing.
– enabled
Place the amount of detergent
2. You switched to NaturalDry Control Menu, you could change
2. You switched to NaturalDry Control Menu, you could change
press button C.
powder/gel putted inside the tub.
2. Remove detergent residues from the edges of the dispenser
lier information to add the proper quantity. Inside the dispenser
and close the cover until it clicks.
1. When measuring out the detergent refer to the mentioned ear-
and close the cover until it clicks.
and close the cover until it clicks.
press button C.
The detergent dispenser automatically opens up at the right time
lier information to add the proper quantity. Inside the dispenser
The detergent dispenser automatically opens up at the right time
3. Close the lid of the detergent dispenser by pulling it up until
3. Close the lid of the detergent dispenser by pulling it up until
press button C.
useof detergent, rinse aid liquid and refined salt is required.
lier information to add the proper quantity. Inside the dispenser
tion foil please refer to (INSTALLATION GUIDE).
tion foil please refer to (INSTALLATION GUIDE).
lier information to add the proper quantity. Inside the dispenser
Place the amount of detergent
C there are indications to help the detergent dosing.
C there are indications to help the detergent dosing.
the closing device is secured in place.
To achieve the best washing and drying results, the combined
As additional steam protection, special designed protection foil is
As additional steam protection, special designed protection foil is
FILLING THE RINSE AID DISPENSER
Place the amount of detergent
2. Remove detergent residues from the edges of the dispenser
Introduce the detergent into
for pre-washing directly inside
ensure exceptional drying performance every day. Door opens at
ensure exceptional drying performance every day. Door opens at
and close the cover until it clicks.
3. Close the lid of the detergent dispenser by pulling it up until
The detergent dispenser automatically opens up at the right time
Door opening system NaturalDry is a convection drying system
C there are indications to help the detergent dosing.
3. Close the lid of the detergent dispenser by pulling it up until
lier information to add the proper quantity. Inside the dispenser
To confirm the change and exit from the Control Menu please
3. Close the lid of the detergent dispenser by pulling it up until
To confirm the change and exit from the Control Menu please
C there are indications to help the detergent dosing.
Introduce the detergent into
according to the program. If all-in-one detergents are used, we
the closing device is secured in place.
according to the program. If all-in-one detergents are used, we
the closing device is secured in place.
C there are indications to help the detergent dosing.
for 5 seconds, until you hear a beep.
status of NaturalDry functionality by pressing
C there are indications to help the detergent dosing.
status of NaturalDry functionality by pressing
Introduce the detergent into
for pre-washing directly inside
2. Remove detergent residues from the edges of the dispenser
for pre-washing directly inside
Introduce the detergent into
2. Remove detergent residues from the edges of the dispenser
and close the cover until it clicks.
the dry dispenser D only.
the tub.
The detergent dispenser automatically opens up at the right time
NaturalDry functionality could be disabled by the user as follows:
NaturalDry functionality could be disabled by the user as follows:
We recommend using detergents that do not contain phosphates
according to the program. If all-in-one detergents are used, we
3. Close the lid of the detergent dispenser by pulling it up until
useof detergent, rinse aid liquid and refined salt is required.
added together with the dishwasher. To see how to mount protec-
2. Remove detergent residues from the edges of the dispenser
added together with the dishwasher. To see how to mount protec-
the closing device is secured in place.
the closing device is secured in place.
C there are indications to help the detergent dosing.
the closing device is secured in place.
To open the detergent dispenser
the temperature that is safe to your kitchen furniture.
2. Remove detergent residues from the edges of the dispenser
recommend using the TABLET button, because it adjusts the
the temperature that is safe to your kitchen furniture.
the dry dispenser D only.
recommend using the TABLET button, because it adjusts the
1. When measuring out the detergent refer to the mentioned ear-
2. Remove detergent residues from the edges of the dispenser
2. Remove detergent residues from the edges of the dispenser
the tub.
the dry dispenser D only.
The detergent dispenser automatically opens up at the right time
which automatically opens the door during/after drying phase to
and close the cover until it clicks.
the dry dispenser D only.
and close the cover until it clicks.
press and hold
E
The detergent dispenser automatically opens up at the right time
press and hold
Rinse aid makes dish DRYING easier. The rinse aid dispenser A
E
the tub.
3. Close the lid of the detergent dispenser by pulling it up until
– enabled
according to the program. If all-in-one detergents are used, we
recommend using the TABLET button, because it adjusts the
the closing device is secured in place.
Place the amount of detergent
and close the cover until it clicks.
2. Remove detergent residues from the edges of the dispenser
and close the cover until it clicks.
press button C.
program so that the best washing and drying results are always
1. Go to the Dishwasher software menu pressing and holding
The detergent dispenser automatically opens up at the right time
program so that the best washing and drying results are always
1. Go to the Dishwasher software menu pressing and holding
lier information to add the proper quantity. Inside the dispenser
and close the cover until it clicks.
The detergent dispenser automatically opens up at the right time
and close the cover until it clicks.
or chlorine, as these products are harmful to the environment.
The detergent dispenser automatically opens up at the right time
tion foil please refer to (INSTALLATION GUIDE).
tion foil please refer to (INSTALLATION GUIDE).
Place the amount of detergent
according to the program. If all-in-one detergents are used, we
We recommend using detergents that do not contain phosphates
3. Close the lid of the detergent dispenser by pulling it up until
according to the program. If all-in-one detergents are used, we
3. Close the lid of the detergent dispenser by pulling it up until
As additional steam protection, special designed protection foil is
As additional steam protection, special designed protection foil is
Place the amount of detergent
the closing device is secured in place.
recommend using the TABLET button, because it adjusts the
Place the amount of detergent
ensure exceptional drying performance every day. Door opens at
for pre-washing directly inside
program so that the best washing and drying results are always
3. Close the lid of the detergent dispenser by pulling it up until
and close the cover until it clicks.
should be filled when the RINSE AID REFILL indicator light
The detergent dispenser automatically opens up at the right time
To confirm the change and exit from the Control Menu please
3. Close the lid of the detergent dispenser by pulling it up until
according to the program. If all-in-one detergents are used, we
achieved.
To confirm the change and exit from the Control Menu please
C there are indications to help the detergent dosing.
achieved.
3. Close the lid of the detergent dispenser by pulling it up until
according to the program. If all-in-one detergents are used, we
3. Close the lid of the detergent dispenser by pulling it up until
according to the program. If all-in-one detergents are used, we
Introduce the detergent into
To open the detergent dispenser
recommend using the TABLET button, because it adjusts the
1. When measuring out the detergent refer to the mentioned ear-
the closing device is secured in place.
for pre-washing directly inside
the closing device is secured in place.
recommend using the TABLET button, because it adjusts the
for pre-washing directly inside
button (6 sec).
button (6 sec).
for pre-washing directly inside
Good washing results also depend on the correct amount of
program so that the best washing and drying results are always
NaturalDry functionality could be disabled by the user as follows:
NaturalDry functionality could be disabled by the user as follows:
achieved.
The detergent dispenser automatically opens up at the right time
the closing device is secured in place.
the tub.
3. Close the lid of the detergent dispenser by pulling it up until
or chlorine, as these products are harmful to the environment.
added together with the dishwasher. To see how to mount protec-
added together with the dishwasher. To see how to mount protec-
the closing device is secured in place.
according to the program. If all-in-one detergents are used, we
2. Remove detergent residues from the edges of the dispenser
recommend using the TABLET button, because it adjusts the
the closing device is secured in place.
the temperature that is safe to your kitchen furniture.
recommend using the TABLET button, because it adjusts the
the closing device is secured in place.
recommend using the TABLET button, because it adjusts the
press button C.
the dry dispenser D only.
the tub.
program so that the best washing and drying results are always
program so that the best washing and drying results are always
lier information to add the proper quantity. Inside the dispenser
press and hold
press and hold
in the control panel is lit.
the tub.
The detergent dispenser automatically opens up at the right time
achieved.
The detergent dispenser automatically opens up at the right time
the tub.
according to the program. If all-in-one detergents are used, we
the closing device is secured in place.
2. You switched to NaturalDry Control Menu, you could change
2. You switched to NaturalDry Control Menu, you could change
recommend using the TABLET button, because it adjusts the
program so that the best washing and drying results are always
and close the cover until it clicks.
1. Go to the Dishwasher software menu pressing and holding
The detergent dispenser automatically opens up at the right time
1. Go to the Dishwasher software menu pressing and holding
detergent being used.
program so that the best washing and drying results are always
program so that the best washing and drying results are always
achieved.
Good washing results also depend on the correct amount of
tion foil please refer to (INSTALLATION GUIDE).
achieved.
The detergent dispenser automatically opens up at the right time
tion foil please refer to (INSTALLATION GUIDE).
C there are indications to help the detergent dosing.
Duration of
The detergent dispenser automatically opens up at the right time
The detergent dispenser automatically opens up at the right time
Introduce the detergent into
Place the amount of detergent
As additional steam protection, special designed protection foil is
according to the program. If all-in-one detergents are used, we
according to the program. If all-in-one detergents are used, we
recommend using the TABLET button, because it adjusts the
program so that the best washing and drying results are always
achieved.
according to the program. If all-in-one detergents are used, we
3. Close the lid of the detergent dispenser by pulling it up until
The detergent dispenser automatically opens up at the right time
to select the desired hardness level (see
achieved.
achieved.
status of NaturalDry functionality by pressing
according to the program. If all-in-one detergents are used, we
status of NaturalDry functionality by pressing
2. Remove detergent residues from the edges of the dispenser
according to the program. If all-in-one detergents are used, we
according to the program. If all-in-one detergents are used, we
the dry dispenser D only.
button (6 sec).
recommend using the TABLET button, because it adjusts the
button (6 sec).
for pre-washing directly inside
recommend using the TABLET button, because it adjusts the
program so that the best washing and drying results are always
NaturalDry functionality could be disabled by the user as follows:
NaturalDry functionality could be disabled by the user as follows:
detergent being used.
Available
Available
°fH
achieved.
added together with the dishwasher. To see how to mount protec-
the closing device is secured in place.
Exceeding the stated amount does not result in a more effective
B
recommend using the TABLET button, because it adjusts the
according to the program. If all-in-one detergents are used, we
recommend using the TABLET button, because it adjusts the
and close the cover until it clicks.
recommend using the TABLET button, because it adjusts the
recommend using the TABLET button, because it adjusts the
E
E
the tub.
program so that the best washing and drying results are always
program so that the best washing and drying results are always
– enabled
Natural
achieved.
Available
Place the amount of detergent
2. You switched to NaturalDry Control Menu, you could change
2. You switched to NaturalDry Control Menu, you could change
program so that the best washing and drying results are always
recommend using the TABLET button, because it adjusts the
1. Go to the Dishwasher software menu pressing and holding
1. Go to the Dishwasher software menu pressing and holding
Duration of
program so that the best washing and drying results are always
3. Close the lid of the detergent dispenser by pulling it up until
The detergent dispenser automatically opens up at the right time
Duration of
program so that the best washing and drying results are always
tion foil please refer to (INSTALLATION GUIDE).
program so that the best washing and drying results are always
wash and increases environmental pollution.
options
options
achieved.
achieved.
*)
Exceeding the stated amount does not result in a more effective
for pre-washing directly inside
Duration of
To confirm the change and exit from the Control Menu please
achieved.
To confirm the change and exit from the Control Menu please
program so that the best washing and drying results are always
Available
achieved.
wash
according to the program. If all-in-one detergents are used, we
the closing device is secured in place.
Dry
achieved.
A
functions *)
status of NaturalDry functionality by pressing
achieved.
status of NaturalDry functionality by pressing
Water
button (6 sec).
button (6 sec).
NaturalDry functionality could be disabled by the user as follows:
Duration of
consumption
the tub.
Water Hardness Table
Available
wash
Available
The amount can be adjusted to the soil level. In the case of
achieved.
wash and increases environmental pollution.
recommend using the TABLET button, because it adjusts the
program
options
*)
*)
Duration of
press and hold
E
The detergent dispenser automatically opens up at the right time
press and hold
consumption
E
– enabled
wash
(litres/cycle)
2. You switched to NaturalDry Control Menu, you could change
2. You switched to NaturalDry Control Menu, you could change
program
*)
1. Go to the Dishwasher software menu pressing and holding
Duration of
program so that the best washing and drying results are always
Duration of
(h:min)
consumption
wash
**)
normally soiled items, use approximately either 35g (powder
options
Available
options
according to the program. If all-in-one detergents are used, we
(litres/cycle)
The amount can be adjusted to the soil level. In the case of
*)
program
°dH
Water
*)
consumption
To confirm the change and exit from the Control Menu please
Duration of
(h:min)
To confirm the change and exit from the Control Menu please
Available
**)
achieved.
Available
status of NaturalDry functionality by pressing
wash
(litres/cycle)
status of NaturalDry functionality by pressing
Level
recommend using the TABLET button, because it adjusts the
*)
program
button (6 sec).
options
*)
Available
Duration of
Available
consumption
detergent) or 35ml (liquid detergent) and additional tea spoon of
(h:min)
**)
(litres/cycle)
normally soiled items, use approximately either 35g (powder
wash
3:40
options
German degrees
*)
program
options
*)
*)
press and hold
E
program so that the best washing and drying results are always
press and hold
E
(h:min)
Duration of
– enabled
**)
consumption
wash
3:40
2. You switched to NaturalDry Control Menu, you could change
(litres/cycle)
program
*)
consumption
detergent directly inside the tub. If tablets are used, one tablet
options
Duration of
(h:min)
options
achieved.
detergent) or 35ml (liquid detergent) and additional tea spoon of
**)
Available
*)
wash
3:40
(litres/cycle)
program
Soft
*)
0 - 6
A
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
Duration of
Available
(h:min)
Available
consumption
status of NaturalDry functionality by pressing
3:40
**)
1:20 - 3:00
Available
(litres/cycle)
7.0 - 14.0
wash
options
program
*)
*)
will be enough.
(h:min)
detergent directly inside the tub. If tablets are used, one tablet
**)
consumption
1:20 - 3:00
wash
options
7.0 - 14.0
3:40
*)
(litres/cycle)
options
*)
press and hold
options
press and hold
program
E
*)
*)
– enabled
consumption
(h:min)
1:20 - 3:00
**)
7.0 - 14.0
Medium
3:40
7 - 11
(litres/cycle)
program
If the crockery is only lightly soiled or if it has been rinsed with
*)
Duration of
will be enough.
(h:min)
2:40
1:20 - 3:00
**)
7.0 - 14.0
1.
When measuring out the detergent refer to the mentioned ear-
3:40
(litres/cycle)
To confirm the change and exit from the Control Menu please
Available
(h:min)
2:40
**)
1:20 - 3:00
7.0 - 14.0
3:40
water before being placed in the dishwasher, reduce the amount
Available
If the crockery is only lightly soiled or if it has been rinsed with
Available
Average
12 - 17
2:40
lier information to add the proper quantity. Inside the dispenser
1. Open the dispenser B by pressing and pulling up the tab on
1:20 - 3:00
options
7.0 - 14.0
3:40
*)
press and hold
-
-
2:40
0:30
1:20 - 3:00
7.0 - 14.0
3:40
of detergent used accordingly (minimum 25 g/ml) e.g. skip the
Duration of
water before being placed in the dishwasher, reduce the amount
options
0:30
Available
options
*)
B there are indications to help the detergent dosing.
2:40
-
Hard
-
1:20 - 3:00
18 - 34
7.0 - 14.0
0:30
2:40
options
*)
powder/gel putted inside the tub.
1:20 - 3:00
7.0 - 14.0
of detergent used accordingly (minimum 25 g/ml) e.g. skip the
Available
Available
-
-
0:30
-
1:20
2.
Remove detergent residues from the edges of the dispenser
2:40
2. Carefully introduce the rinse aid as far as the maximum
1:20 - 3:00
7.0 - 14.0
-
-
1:20
-
-
Very hard
0:30
35 - 50
2:40
powder/gel putted inside the tub.
Duration of
options
options
1:20
*)
and close the cover until it clicks.
0:30
2:40
-
-
1:40
1:20
0:30
2:40
-
-
Available
-
Available
1:40
1:20
3. Close the lid of the detergent dispenser by pulling it up until
-
-
0:30
-
-
1:40
-
-
-
1:20
-
0:30
Duration of
options
3:35
1:40
options
the closing device is secured in place.
*)
1:20
3. Press the lid down until you hear a click to close it.
0:30
-
-
3:35
1:40
1:20
-
-
Available
-
3:35
NEVER pour the rinse aid directly into the tub.
1:40
1:20
-
3:35
1:40
-
-
1:40
-
The detergent dispenser automatically opens up at the right time
-
1:20
1:40
options
3:35
*)
1:40
B
1:40
3:35
according to the program. If all-in-one detergents are used, we
1:40
-
-
-
-
-
-
0:10
1:40
-
-
3:35
1:40
-
B
0:10
-
1:40
-
-
recommend using the TABLET button, because it adjusts the
3:35
A
0:10
1:40
-
3:35
-
-
-
-
-
-
-
-
-
0:10
0:50
program so that the best washing and drying results are always
1:40
3:35
-
-
A
0:50
-
-
0:10
-
-
1:40
-
0:50
-
-
achieved.
-
0:10
-
1:40
-
-
0:50
0:10
1:40
-
-
-
-
-
-
-
-
-
-
-
0:50
-
0:10
-
-
-
-
-
-
-
-
-
-
0:50
-
-
-
0:10
-
0:50
0:10
-
-
0:50
-
-
-
-
-
-
-
-
-
-
-
-
0:50
-
-
-
-
-
-
-
-
-
-
0:50
1.
When measuring out the detergent refer to the mentioned ear-
-
-
-
lier information to add the proper quantity. Inside the dispenser
-
-
-
-
1.
When measuring out the detergent refer to the mentioned ear-
-
-
-
-
-
-
B there are indications to help the detergent dosing.
lier information to add the proper quantity. Inside the dispenser
-
-
-
-
-
-
-
-
4. FAST WASH 30' - Program to be used for half load of lightly-
2.
Remove detergent residues from the edges of the dispenser
B there are indications to help the detergent dosing.
-
and close the cover until it clicks.
soiled dishes with no dried food residues.
2.
Remove detergent residues from the edges of the dispenser
-
-
-
-
-
-
3. Close the lid of the detergent dispenser by pulling it up until
and close the cover until it clicks.
5. FAST WASH AND DRY - Normally soiled crockery. Everyday
B
-
-
-
the closing device is secured in place.
3. Close the lid of the detergent dispenser by pulling it up until
cycle, that ensures optimal cleaning and drying performance
-
-
-
-
-
the closing device is secured in place.
in shorter time.
-
-
The detergent dispenser automatically opens up at the right time
-
6. GLASS - Program for delicate items, which are more
according to the program. If all-in-one detergents are used, we
The detergent dispenser automatically opens up at the right time
-
sensitive to high temperatures, for example glasses and
recommend using the TABLET button, because it adjusts the
-
-
-
according to the program. If all-in-one detergents are used, we
cups.
program so that the best washing and drying results are always
recommend using the TABLET button, because it adjusts the
achieved.
7. SILENT - Suitable for night-time operation of the appliance.
-
program so that the best washing and drying results are always
achieved.
Ensures optimal cleaning and drying performance with the
lowest noise emission.
8. SANITIZING - Normally or heavily soiled crockery, with
additional antibacterial wash. Can be used to perform
9
9
maintenance of the dishwasher.
9
9
9. PRE-WASH - Use to refresh crockery planned to be washed
9
9
9
9
9
later. No detergent to be used with this program.
9
9
10. SELF-CLEAN - Program to be used to perform maintenance
9
9
9
9
9
9
of the dishwasher, to be carried out only when the
9
dishwasher is EMPTY using specific detergents designed for
9
dishwasher maintenance
9
Notes: Please note that cycle FAST WASH is dedicated for lightly
soiled dishes.
OPTIONS can be selected directly by pressing the corresponding
button (see CONTROL PANEL).
If an option is not compatible with the selected program see
PROGRAMS TABLE, the corresponding LED rapidly 3 times
and beeps will sound. The option will not be enabled.
supplied. The LOW RINSE AID indicator light will not be lit if you
run out of rinse aid. A maximum of 5 levels can be set according to
the dishwasher model. The factory setting is specific to the model
please follow instruction above to check this for your machine.
• If you see bluish streaks on the dishes, set a low number (1-2).
• If there are drops of water or limescale marks on the dishes,
set a high number (3-4).
FILLING THE DETERGENT DISPENSER
ADJUSTING THE DOSAGE OF RINSE AID
If you are not completely satisfied with the drying resu
� � � � � � � � � � � � � � � � � � � � � � � � � � � � �
button (3 sec).
for 5 seconds, until you hear a beep.
three times - a beep will be heard.
adjust the quantity of rinse aid used.
dishwashers.
• Switch the dishwasher on using the ON/OFF button
To achieve the best washing and drying results, the combined
The current selection level number and the salt indicator light
• Switch it off using the ON/OFF button.
useof detergent, rinse aid liquid and refined salt is required.
� � � � � �
to select the level of rinse aid quantity to be
• Press button
Eco 50°
We recommend using detergents that do not contain phosphates
Press button
to select the desired hardness level (see
• Switch it on using the ON/OFF button.
or chlorine, as these products are harmful to the environment.
WATER HARDNESS TABLE).
AUTO 50°- 60°
•
The current selection level number and rinse aid indicato
Good washing results also depend on the correct amount of
Water Hardness Table
•
Press button
detergent being used.
°fH
Intensive 65°
supplied.
s.
Exceeding the stated amount does not result in a more effective
Level
Fast wash 30' 50°
• Switch it off using the ON/OFF button.
German degrees
wash and increases environmental pollution.
0 - 10
Setting is complete!
Fast wash and dry 50°
The amount can be adjusted to the soil level. In the case of
1
Soft
11 - 20
If the rinse aid level is set to ZERO (ECO), no rinse aid
normally soiled items, use approximately either 35g (powder
2
Medium
Glass 45°
21 - 30
supplied. The LOW RINSE AID indicator light will not b
detergent) or 35ml (liquid detergent) and additional tea spoon of
3
Average
run out of rinse aid. A maximum of 5 levels can be set a
detergent directly inside the tub. If tablets are used, one tablet
31 - 60
EN
the dishwasher model. The factory setting is specific to
will be enough.
EN
4
Hard
61 - 90
EN
please follow instruction above to check this for your m
Sanitizing 65°
If the crockery is only lightly soiled or if it has been rinsed with
EN
5
Very hard
EN
• If you see bluish streaks on the dishes, set a low num
water before being placed in the dishwasher, reduce the amount
EN
Pre-Wash
• If there are drops of water or limescale marks on th
EN
of detergent used accordingly (minimum 25 g/ml) e.g. skip the
EN
set a high number (3-4).
d
d
EN
– enabled
– disabled
– disabled
powder/gel putted inside the tub.
Self-Clean 65°
EN
d
button (3 sec).
button (3 sec).
d
– enabled
– disabled
– disabled
FILLING THE DETERGENT DISPENSER
� � � � � � � � � � � � � � � � � � � � � � � �
d
button (3 sec).
d
button (3 sec).
– enabled
– disabled
– disabled
To open the detergent dispenser
dishwashers.
press button A.
B
To achieve the best washing and drying results, the co
button (3 sec).
button (3 sec).
Duration of
Introduce the detergent into
useof detergent, rinse aid liquid and refined salt is req
Water
Water
A
wash pro-
the dry dispenser B only.
Duration of
wash pro-
We recommend using detergents that do not contain p
d
d
– enabled
– disabled
consumption
– disabled
consumption
Duration of
Duration of
gram
wash program
gram
consumption
*)
Water
Energy
Water
or chlorine, as these products are harmful to the enviro
Place the amount of detergent
Water
Water
wash
(litres/cycle)
(litres/cycle)
Energy
consumption
consumption
wash pro-
wash pro-
(h:min)
(h:min)**)
(h:min)
Good washing results also depend on the correct amo
(litres/cycle)
Water
for pre-washing directly inside
**)
Energy
**)
program
Duration of
button (3 sec).
d
consumption
button (3 sec).
d
– enabled
– disabled
consumption
– disabled
consumption
(litres/cycle)
(kWh/cycle)
Water
Energy
Water
Duration of
Duration of
Duration of
(h:min)
consumption
**)
gram
wash
(kWh/cycle)
gram
*)
Water
detergent being used.
the tub.
Energy
°fH
Water
consumption
consumption
Water
Water
wash
wash
(litres/cycle)
(litres/cycle)
(kWh/cycle)
program
Water
Energy
consumption
wash pro-
consumption
wash pro-
consumption
2:45
2:45
12.0
(h:min)
(kWh/cycle)
(h:min)
3:40
3:40
(litres/cycle)
8.7
8.7
program
**)
0.66
**)
Water
French degrees
Energy
program
d
button (3 sec).
d
button (3 sec).
Exceeding the stated amount does not result in a more
Duration of
(h:min)
– enabled
– disabled
consumption
**)
consumption
– disabled
consumption
(litres/cycle)
8.7
0.66
(litres/cycle)
(kWh/cycle)
Duration of
Water
Water
Duration of
(h:min)
Energy
consumption
**)
gram
Duration of
(h:min)
gram
**)
*)
wash
1.
When measuring out the detergent refer to the mentioned ea
Water
8.7
(kWh/cycle)
0.66
Water
Water
wash and increases environmental pollution.
Water
0 - 10
Energy
wash
consumption
wash
consumption
(litres/cycle)
(litres/cycle)
8.7
0.66
1:20 - 3:00
wash
3:40
(kWh/cycle)
0.70 - 1.10
7.0 - 14.0
8.7
Water
program
Energy
consumption
consumption
2:45
2:45
12.0
(h:min)
consumption
1:20 - 3:00
(h:min)
consumption
**)
3:40
lier information to add the proper quantity. Inside the dispense
**)
8.7
program
3:40
0.70 - 1.10
(litres/cycle)
8.7
8.7
(kWh/cycle)
0.66
program
The amount can be adjusted to the soil level. In the ca
button (3 sec).
program
button (3 sec).
d
– disabled
(h:min)
consumption
(litres/cycle)
**)
(litres/cycle)
2:00
0.70 - 1.10
2:00
15.0
8.7
11 - 20
0.66
(litres/cycle)
(kWh/cycle)
Duration of
(h:min)
Duration of
**)
(h:min)
**)
B there are indications to help the detergent dosing.
17.0
(h:min)
2:40
1.30
17.0
1:20 - 3:00
0.70 - 1.10
**)
B
7.0 - 14.0
8.7
(kWh/cycle)
0.66
Water
normally soiled items, use approximately either 35g (p
Water
Water
wash
17.0
1:20 - 3:00
1.30
7.0 - 14.0
1:20 - 3:00
3:40
0.70 - 1.10
7.0 - 14.0
8.7
8.7
0.66
consumption
wash pro-
2:45
wash pro-
2:45
12.0
21 - 30
2:40
2.
Remove detergent residues from the edges of the dispenser
17.0
3:40
1.30
8.7
3:40
8.7
detergent) or 35ml (liquid detergent) and additional tea
program
3:40
0.70 - 1.10
8.7
8.7
Duration of
0.66
button (3 sec).
consumption
consumption
0:30
9.0
17.0
9.0
2:40
1.30
0.50
(litres/cycle)
17.0
2:00
2:00
15.0
0.70 - 1.10
Water
8.7
0.66
Duration of
(h:min)
9.0
gram
wash
2:40
0.50
**)
gram
and close the cover until it clicks.
17.0
*)
17.0
2:40
1.30
17.0
the lid.
detergent directly inside the tub. If tablets are used, on
1:20 - 3:00
7.0 - 14.0
2:30
31 - 60
0.70 - 1.10
2:30
15.0
consumption
Water
Water
(litres/cycle)
(litres/cycle)
9.0
1:20 - 3:00
0.50
7.0 - 14.0
17.0
1:20 - 3:00
program
1.30
7.0 - 14.0
1:20 - 3:00
7.0 - 14.0
0.70 - 1.10
wash pro-
wash pro-
3. Close the lid of the detergent dispenser by pulling it up until
9.0
1:20
0.50
0:30
10.0
10.0
(h:min)
0:30
(h:min)
1.10
(litres/cycle)
9.0
17.0
**)
1.30
**)
3:40
8.7
will be enough.
0.70 - 1.10
(h:min)
consumption
consumption
10.0
0:30
1.10
**)
9.0
2:00
0:30
2:00
15.0
9.0
9.0
61 - 90
0.50
2:40
17.0
17.0
1.30
Duration of
the closing device is secured in place.
gram
2:40
gram
17.0
10.0
*)
1.10
(110 ml) reference notch of the filling space - avoid spilling it.
9.0
2:40
0.50
17.0
If the crockery is only lightly soiled or if it has been rins
2:40
17.0
17.0
1.30
2:30
2:30
15.0
Water
Water
12.0
10.0
1:20
1:40
1.10
1.00
(litres/cycle)
10.0
12.0
(litres/cycle)
9.0
3:40
0.50
8.7
17.0
1:20 - 3:00
1.30
7.0 - 14.0
wash pro-
0:55
2:45
To open the detergent dispenser
1:20
wash pro-
0:55
2:45
12.0
11.5
10.0
12.0
1.00
1:20
10.0
(h:min)
1:20
(h:min)
1.10
10.0
If this happens, clean the spill immediately with a dry cloth.
**)
0:30
**)
9.0
water before being placed in the dishwasher, reduce th
9.0
0.50
consumption
consumption
12.0
0:30
1.00
The detergent dispenser automatically opens up at the right time
9.0
0:30
9.0
10.0
1.10
0:30
9.0
9.0
0.50
press button A.
3:35
16.5
16.5
12.0
gram
1:40
1.00
1.00
gram
To open the detergent dispenser
12.0
*)
10.0
2:40
1.10
17.0
of detergent used accordingly (minimum 25 g/ml) e.g.
9.0
1:20 - 3:00
0.50
7.0 - 14.0
2:30
2:30
15.0
16.5
1:40
1.00
Water
12.0
(litres/cycle)
according to the program. If all-in-one detergents are used, we
(litres/cycle)
12.0
1:40
1.00
12.0
1:20
10.0
10.0
1.10
wash pro-
2:45
0:55
1:20
0:55
2:45
11.5
12.0
10.0
16.5
1.00
1:40
press button A.
(h:min)
1:20
(h:min)
10.0
powder/gel putted inside the tub.
12.0
**)
1.00
**)
10.0
Introduce the detergent into
1:20
1.10
10.0
16.5
1:40
1.00
12.0
12.0
3:35
1.30
consumption
recommend using the TABLET button, because it adjusts the
16.5
12.0
0:30
1.00
9.0
2:00
1:40
2:40
2:00
1:40
15.0
11.5
17.0
10.0
1.10
12.0
3:35
1.30
16.5
gram
3:35
16.5
16.5
1.00
the dry dispenser B only.
1:40
12.0
12.0
1.00
Introduce the detergent into
1:40
program so that the best washing and drying results are always
12.0
12.0
1.30
16.5
1:40
1.00
(litres/cycle)
12.0
1:40
12.0
12.0
1.00
12.0
4.5
0:55
2:45
0:10
1:40
1.30
0.01
0:55
2:45
11.5
12.0
12.0
4.5
3:35
16.5
(h:min)
0:30
1:20
1.00
10.0
9.0
12.0
**)
1.00
the dry dispenser B only.
Place the amount of detergent
1:40
12.0
4.5
0.01
achieved.
12.0
1:40
1.30
12.0
1:40
3:35
1:40
11.5
16.5
16.5
2:00
1.00
2:00
15.0
4.5
3:35
0.01
16.5
3:35
16.5
12.0
1.30
3:35
16.5
16.5
1.00
0:10
0:10
4.5
2:30
2:30
15.0
for pre-washing directly inside
0:50
9.5
9.5
4.5
0:10
0.70
0.01
Place the amount of detergent
4.5
12.0
1:20
1:40
1.30
12.0
10.0
16.5
1.00
9.5
0:10
0.70
4.5
4.5
2:45
0:10
0.01
12.0
4.5
1:40
1:40
12.0
12.0
1.30
the tub.
1:40
12.0
9.5
0.70
for pre-washing directly inside
1:40
12.0
4.5
1:40
0.01
1:40
11.5
12.0
2:00
1:40
1.30
2:00
15.0
12.0
9.5
0:50
0.70
9.5
4.5
3:35
0.01
16.5
1:40
12.0
12.0
1.30
0:10
0:10
4.5
2:30
2:30
15.0
0:50
the tub.
9.5
0:50
9.5
9.5
0.70
0:10
4.5
B
4.5
0.01
0:50
0:10
0:50
8.0
4.5
0:55
0:55
11.5
9.5
0:10
0.70
4.5
0:10
0:10
4.5
4.5
0.01
9.5
3:35
1:40
0.70
16.5
12.0
4.5
0.01
2:00
15.0
0:50
9.5
9.5
0.70
A
0:10
0:10
4.5
2:30
2:30
15.0
0:50
9.5
0:50
9.5
9.5
0:50
0.70
9.5
0:50
0:50
8.0
0:55
0:55
11.5
0:10
1:40
0:50
12.0
4.5
9.5
0.70
1:40
1:40
11.5
2:30
15.0
0:50
9.5
0:10
4.5
0:50
0:50
8.0
0:55
0:55
11.5
1:40
1:40
11.5
0:50
9.5
0:10
0:10
4.5
0:55
11.5
-
1:40
1:40
-
11.5
1.
When measuring out the detergent refer to the men
A
-
0:10
0:10
4.5
-
lier information to add the proper quantity. Inside th
0:50
0:50
8.0
-
B there are indications to help the detergent dosing
1:40
11.5
-
-
0:10
0:10
4.5
2.
Remove detergent residues from the edges of the
-
0:50
0:50
8.0
-
and close the cover until it clicks.
-
0:10
4.5
3. Close the lid of the detergent dispenser by pulling i
0:50
0:50
8.0
the closing device is secured in place.
0:50
8.0
The detergent dispenser automatically opens up at th
according to the program. If all-in-one detergents are
recommend using the TABLET button, because it adju
program so that the best washing and drying results a
achieved.
8
8
26
9
9
9
9
9
9
DOOR OPENING
three times - a beep will be heard.
after 165 min
9
9
80-170 min*
to select the level of rinse aid quant
end of cycle
9
9
°dH
°fH
N/A
French degrees
9
9
end of cycle
0 - 6
0 - 10
9
7 - 11
11 - 20
end of cycle
12 - 17
21 - 30
end of cycle
EN
18 - 34
31 - 60
N/A
EN
35 - 50
61 - 90
EN
EN
N/A
button:
button:
EN
EN
EN
EN
N/A
button:
button:
EN
To open the detergent dispenser
button:
button:
press button A.
EN
Introduce the detergent into
the dry dispenser B only.
Place the amount of detergen
Energy
Energy
button:
button:
Water
Energy
for pre-washing directly inside
consumption
consumption
consumption
the tub.
Energy
Energy
Energy
(kWh/cycle)
(kWh/cycle)
button:
button:
consumption
(kWh/cycle)
consumption
consumption
(kWh/cycle)
Energy
Energy
Energy
consumption
Energy
Energy
(kWh/cycle)
(kWh/cycle)
button:
button:
consumption
consumption
12.0
0.92
0.92
8.7
0.59
(kWh/cycle)
0.66
consumption
consumption
(kWh/cycle)
(kWh/cycle)
Energy
Energy
Energy
Energy
consumption
(kWh/cycle)
(kWh/cycle)
button:
0.70 - 1.10
0.66
consumption
consumption
12.0
0.92
0.92
consumption
7.0 - 14.0
0.70 - 1.10
0.66
(kWh/cycle)
0.66
A
(kWh/cycle)
(kWh/cycle)
15.0
1.35
1.35
(kWh/cycle)
1.30
0.70 - 1.10
Energy
Energy
Energy
0.70 - 1.10
0.70 - 1.10
0.66
consumption
12.0
0.92
0.92
17.0
1.30
0.66
0.66
0.66
consumption
consumption
0.50
(kWh/cycle)
1.30
15.0
1.35
1.35
Energy
1.30
1.30
0.70 - 1.10
15.0
1.50
1.50
consumption
Energy
Energy
(kWh/cycle)
(kWh/cycle)
0.70 - 1.10
0.70 - 1.10
0.70 - 1.10
1.10
9.0
0.50
(kWh/cycle)
0.50
0.66
consumption
consumption
0.50
15.0
0.50
1.35
1.35
1.30
1.30
1.30
1.30
15.0
1.50
1.50
Energy
Energy
(kWh/cycle)
1.10
1.00
(kWh/cycle)
0.66
0.70 - 1.10
11.5
12.0
1.10
1.10
0.92
0.92
1.10
10.0
1.10
1.10
0.50
consumption
consumption
0.50
0.50
0.50
1.00
1.00
1.30
0.70 - 1.10
15.0
1.50
1.50
1.00
Energy
(kWh/cycle)
(kWh/cycle)
1.00
1.10
11.5
12.0
1.10
0.92
1.10
0.92
1.10
12.0
1.00
1.10
1.10
1.30
consumption
1.00
0.50
11.5
15.0
1.30
1.30
1.35
1.35
1.30
1.00
1.00
1.00
1.00
(kWh/cycle)
1.00
1.00
11.5
12.0
1.30
0.01
1.10
0.92
0.92
1.10
16.5
1.00
1.10
0.50
To open the detergent
1.30
1.30
11.5
1.00
1.30
1.30
15.0
1.35
1.35
1.00
1.00
1.00
press button A.
4.5
0.01
0.01
15.0
1.50
1.50
0.70
0.01
1.10
1.00
0.01
0.01
0.92
1.30
12.0
1.30
1.30
Introduce the deterg
1.30
11.5
1.30
1.30
15.0
1.30
1.35
1.35
0.70
1.00
1.00
4.5
0.01
0.01
15.0
1.50
1.50
0.70
the dry dispenser B
0.70
0.01
8.0
0.01
0.80
0.80
11.5
1.10
1.10
0.01
0.01
4.5
0.01
1.30
1.00
1.35
Place the amount of
0.70
4.5
0.01
0.01
15.0
1.50
1.50
0.70
0.70
0.70
for pre-washing dire
8.0
0.80
0.80
11.5
1.10
1.10
0.01
1.30
9.5
0.70
the tub.
11.5
1.30
1.30
1.50
0.70
0.01
8.0
0.80
0.80
11.5
1.10
1.10
11.5
1.30
1.30
0.70
4.5
0.01
0.01
1.10
-
11.5
1.30
1.30
4.5
0.01
0.01
-
8.0
0.80
0.80
-
-
1.30
4.5
0.01
0.01
-
8.0
0.80
0.80
-
-
-
0.01
8.0
0.80
0.80
-
-
0.80
If the rinse aid
supplied. The
run out of rins
the dishwashe
please follow
• If you see b
• If there are
set a high n
FILLING TH
� � � � � �
dishwashers
To achieve the
useof deterge
We recomme
or chlorine, as
Good washing
detergent bein
Exceeding the
wash and incr
The amount c
normally soile
detergent) or
detergent dire
will be enough
If the crockery
water before b
of detergent u
powder/gel pu
B
A
1.
When mea
lier informa
B there ar
2.
Remove d
and close
3. Close the
the closing
The detergen
according to
recommend u
program so th
achieved.