KitchenAid KUDD01SS Especificações - Página 2

Procurar online ou descarregar pdf Especificações para Máquina de lavar loiça KitchenAid KUDD01SS. KitchenAid KUDD01SS 3 páginas. Single drawer dishwasher

Imprimir página
KitchenAid
Single Drawer Dishwasher Custom Cabinet Requirements
®
(9.7 cm)
IMPORTANT: For best results, carefully read the following
instructions and recommendations before building the
custom cabinet.
• Build the custom cabinet to the size and specifications as
shown (See figure 2).
• The minimum thickness of cabinet/cavity sides is
⁄
" (1.6 cm).
5
8
• The supporting base of the cabinet must be solid, level,
and able to sustain weight up to 104 lbs. (47 kg).
• For best installation, the use of all four Side Attaching Tabs is
recommended. Wood spacers may need to be added to the
sides of the cabinet in order to properly secure the dishwasher
to the cabinet.
• A utility hole, that will be used to route power supply cord
and hoses, must be located as shown (See figure 2). The
utility hole can be located on either side depending on the
location of services. If the utility hole is not located as shown,
the hoses will prevent the dishwasher from being pushed
back all the way into the cavity. Make sure the edges of the
utility hole are smooth or covered to prevent damage to the
power cord and hoses. If the utility hole is through a metal
cabinet, the hole must be protected with an edge protector.
19
⁄
"
7
8
(50.5 cm)
3
⁄
"
13
16
2
⁄
"
5
8
(6.7 cm)
The minimum thickness of cabinet
cavity sides and bottom is
FIGURE 2
Utility Hole:
1
⁄
" (3.8 cm) dia.
1
2
either side immediately
adjacent to corner
22
⁄
"
7
8
(58.0 cm
)
23
⁄
" (60.0 cm)
5
8
⁄
" (1.6 cm)
5
8
• A 3-prong grounded outlet must be installed within
6" (15.2 cm) to 18" (45.7 cm) to either side of the utility hole
in the cabinet sidewall. The power outlet must be accessible
after installation.
• When installing a custom wood front door panel to the
dishwasher, the cabinet width of 23
increased to allow
cabinet side and custom panel edge (See figure 2).
• For corner installation, there must be a
between the adjacent cabinet doors (i.e. door knobs) and
open dishwasher drawer.
Adjacent cabinetry must not
extend above the cavity base.
• It is recommended that wood cabinetry surrounding
the dishwasher be sealed with an oil-based paint or
moisture-proof polyurethane to prevent possible
damage from humidity.
• Refer to the Installation Instructions Single Drawer
Dishwasher included with the Drawer Dishwasher
to complete installation.
NOTE: Diamond
symbol
16
⁄
"
7
32
Side Attaching Tab
(41.2 cm)
screw locations.
⁄
" (60.0 cm) must be
5
8
⁄
" (2.5 mm) clearance between the
3
32
1
indicates
⁄
" (12.7 mm) space
2
DISHWASHER