Avantco 178Z2R4OWMS Manual do utilizador - Página 4
Procurar online ou descarregar pdf Manual do utilizador para Equipamento comercial para alimentos Avantco 178Z2R4OWMS. Avantco 178Z2R4OWMS 9 páginas. Top mount reach-in refrigerator and freezer
Imprimir página
User Manual
Field Convertible Doors
The Avantco Z Series 1 Door Reach Ins (178Z1xxx) ship with a right-hinged door design. If you would
like to convert the reach-in to a left hinged door design (solid door models), you must purchase
the left hinges separately (one set per door - Avantco item #178CFD1KITFR) and follow these
instructions:
Tools Needed:
• Socket Set
• Pliers
• Adjustable Wrench
• Phillips Head Screwdriver
1. Remove the small Philips head screws at the top and bottom door hinge where it attaches to the brackets.
Be careful not to lose the small washers.
2. Next take off the top bracket. It is held on with 3 bolts.
3. The door should come off at this point
- Note: Do not lose the small round brass spacer on the bottom hinge!
4. Remove the bottom bracket. It is held on with 3 bolts.
5. Replace the bottom hinge with the new left hand bottom bracket. It is held on with 3 bolts.
6. At this point, you will need to adjust the top and bottom spring tensioners so the door will close properly.
7. Put the door on the bottom hinge on the left side. You will need to reuse the brass spacer from step 5.
8. Next, place the top bracket on the top of the door before bolting it to the unit with the 3 bolts.
9. Replace the small screws on the top and bottom of the bracket and door spring. Make sure the door is on
properly before you do this.
- 4 -