HIKVISION DS-2CE17U8T-IT Manual do utilizador - Página 8
Procurar online ou descarregar pdf Manual do utilizador para DVR HIKVISION DS-2CE17U8T-IT. HIKVISION DS-2CE17U8T-IT 14 páginas. Turbohd 4k series bullet camera
Também para HIKVISION DS-2CE17U8T-IT: Manual do utilizador (16 páginas), Manual de início rápido (17 páginas)
Imprimir página
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
For cement wall/ceiling, expansion bolts are
required to fix the camera. For wooden
wall/ceiling, self-tapping screws are required.
5. Connect the corresponding power cord, and video
cable.
6. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the surveillance angle.
Rotation Position
[0° to 360°]
1). Loosen the No.1 adjusting screw to adjust the
pan position [0° to 360°]. Tighten the No.1
adjusting screw.
2). Loosen the No.2 adjusting screw to adjust the
tilting position [0° to180°]. Tighten the No. 2
adjusting screw.
3). Loosen the No.3 adjusting screw to adjust the
rotation position [0° to 360°]. Tighten the No.3
adjusting screw.
Ceiling/Wall Mounting with Junction Box
2.2.2
Before you start:
You need to purchase a junction box separately.
Steps:
1. Paste the drill template on the ceiling/wall.
2. Drill screw holes and the cable hole (optional) in the
ceiling/wall according to the holes of the drill
template.
Note:
Drill the cable hole, when adopting ceiling outlet to
route the cable.
3. Take apart the junction box, and align the screw
holes of the bullet camera with those on the
Junction box's cover.
Figure 2-9 Fix the Camera to the Ceiling
Figure 2-10 3-Axis Adjustment
Pan Position
[0° to 360°]
1
Tilt Position
[0° to 180°]
2
3