Green Thumb 60020 GT Manual do operador - Página 15

Procurar online ou descarregar pdf Manual do operador para Cortador de relva Green Thumb 60020 GT. Green Thumb 60020 GT 20 páginas. 20 in. 24 volt cordless lawn mower

Imprimir página

REPLACING WHEELS

See

Figure 16.

To replace a wheel:

■ Stop the motor and remove the switch key.

■ Turn the mower on its side.

■ Using a flat blade screwdriver, pry off the hubcap.

■ Remove the cotter pin from the wheel axle, then remove

the wheel.

■ Replace with new tire and insert new cotter pin to

secure.

✟ Replace hubcap.

STORING THE MOWER

See Figure 17.

■ Remove the switch key and store in a secure location out

of the reach of children.

■ Turn mower on its side and clean grass clippings that have

accumulated on the underside of the mower deck.

■ Wipe the mower clean with a dry cloth.

■ Check all nuts, bolts, knobs, screws, fasteners, etc., for

tightness.

■ Inspect moving parts for damage, breakage, and wear.

Have repairs made on any damaged or missing parts.

■ Store mower indoors in a clean, dry place out of the reach

of children.

■ Do not store near corrosive materials such as fertilizer or

rock salt.

To lower the handle before storing:

■ Fully loosen the handle knobs on the sides of the handle

and fold the upper handle down.

■ Push inward on each side of the lower handle, and lift the

sides of the lower handle past the edges of the handle

mounting brackets.

BATTERY MAINTENANCE

It is recommended to charge the mower every 2 months for

optimum performance when not in use. If the battery has

been in storage for a long time without recharging, it will be

in a low charge state.

MAINTENANCE

Page 15

HUBCAP

COTTER PIN

HANDLE KNOBS

WHEEL

WHEEL AXLE

Fig. 16

UPPER

HANDLE

LOWER

HANDLE

Fig. 17