Avantco 178UDD4HCS Manual do utilizador - Página 11

Procurar online ou descarregar pdf Manual do utilizador para Utensílios de cozinha Avantco 178UDD4HCS. Avantco 178UDD4HCS 19 páginas. Beer dispensers
Também para Avantco 178UDD4HCS: Manual do utilizador (19 páginas), Manual do utilizador (19 páginas)

Imprimir página

1. Temperature Setting

Changing CO

Follow these instructions at ALL times when you replace a CO

1. Close cylinder at A.

2. Remove tap D from keg. Pull pressure release ring on body of tap to release pressure

remaining in line. (do not close C)

3. Remove or loosen regulator key B by turning counter clockwise.

4. Remove regulator from used cilinder at E.

5. Remove dust cap from new gas cylinder at E and clear dust from outlet by opening and closing

valve A quickly using appropriate wrench.

6. Attach regulator to new cylinder at E. (use new fiber/plastic washer, if required).

7. Open valve A all the way.

8. Close valve C.

9. Adjust regulator key B by turning clockwise to set pressure. (check setting by opening C

and pulling and releasing the ring F on the pressure release valve on the body of the tap).

10. Tap keg at D with valve C open.

Note: DO NOT drop cylinders. DO NOT lay cylinders flat.

It requires 1/2 lb. of CO

with 15 lbs. of pressure on barrel.

Pressure Adjustment on CO

Increasing Pressure:

1. Close regulator shut-off C.

2. Turn regulator key B clockwise and make setting.

3. Tap gauge for accurate reading.

4. Open regulator shut-off C and draw beer.

Decreasing Pressure:

1. Close regulator shut-off C.

2. Untap keg at D and activate tap handle to

bleed line. Leave in open position.

3. Slowly open regulator shut-off C and

simultaneously turn regulator key

counter-clockwise to zero reading.

4. Close regulator shut-off C and set pressure by

turning regulator key clockwise. Check setting

by opening and closing valve C.

5. Close tap head D. (put in OFF position)

6. Tap keg at D and open regulator shut-off C.

Gas Cylinder

to dispense 1/2 barrel of beer at 38°F

User Manual

gas cylinder.

Regulator

(May vary based on regulator design)

- 11 -