Avantco Beer Keg Dispenser Manual do utilizador - Página 6
Procurar online ou descarregar pdf Manual do utilizador para Utensílios de cozinha Avantco Beer Keg Dispenser. Avantco Beer Keg Dispenser 13 páginas. Beer keg dispenser
Imprimir página
User Manual
Installing the Casters
Follow the steps below to install the casters.
1. Empty the inside of the cabinet completely and lay the Beer Keg Dispenser down on its side. We
recommend that you place a piece of cardboard or cloth underneath the cabinet to prevent dents
or scratches.
2. Insert the casters into the holes on the bottom corners of the cabinet. Tighten each caster by
turning the head of the bolts clockwise with a wrench. (not included with the provided parts).
3. Once all four casters have been tightened, stand the cabinet in its upright position.
Note: Two of the casters include locking mechanisms to ensure the unit does not slide on hard
floors. These two locking casters should be fastened at the front end of the unit, with the unlocked
casters fastened on the rear end.
Note: Allow the Beer Keg Dispenser to stand in an upright position for at least 8 hours before
plugging in the unit. This is very important! Once the unit is laid on its side, the refrigerant in the
refrigeration system will shift. The refrigerant in the refrigeration system needs to stabilize before the
unit is turned on.
- 6 -