Avantco KEGERATRS Manual do utilizador - Página 8
Procurar online ou descarregar pdf Manual do utilizador para Utensílios de cozinha Avantco KEGERATRS. Avantco KEGERATRS 13 páginas. Beer keg dispenser
Imprimir página
User Manual
Installing the Guardrail
Follow the steps below to install the guardrail.
1. Place the guardrail on top of the cabinet.
2. Align all support feet of the guardrail with the holes on top of the unit.
Installing the CO2 Cylinder
Follow these steps to safely install the CO2 regulator and CO2 cylinder. You must read and
understand the following procedures for the CO2 cylinders before installation.
NOTE: Your CO2 cylinder has DOT (USA Department of Transportation) approval, however the
cylinder has been shipped empty to avoid any possible accidents during transportation. When you
purchase the first keg of beer, you must also have your CO2 cylinder filled at your local supplier.
1. Install the CO2 gas line tube to the regulator
by attaching one end of the tube to the hose
barb connection on the CO2 regulator. (See
Illustration B, on page 8)
2. Insert the special washer (provided with the
kit) into the regulator to cylinder attachment
nut. (See Illustration A, on page 8)
3. Attach the CO2 regulator to the CO2
cylinder by screwing the regulator nut onto
the cylinder valve and tightening with an
adjustable wrench.
4. Wrap the rubber strap that is attached to the
interior of Beer Keg Dispenser unit around the
CO2 bottle to secure the bottle in place (as
shown to the right).
5. Position the cylinder so that you are able to
read the numbers on the gauges and have
easy access to shut-off valves.
CO2 can be dangerous! CO2 cylinders contain high-pressured gas, which can be
hazardous if handled improperly. They must be handled with care.
DANGER!
- 8 -