IKEA RENGORA Manual de instruções - Página 8

Procurar online ou descarregar pdf Manual de instruções para Máquina de lavar loiça IKEA RENGORA. IKEA RENGORA 29 páginas. Ikea dishwasher
Também para IKEA RENGORA: Manual do utilizador (24 páginas), Manual do Proprietário (48 páginas), Manual (24 páginas), Manual (28 páginas), Manual (32 páginas), Manual de instruções de instalação (16 páginas), Manual (28 páginas), Manual (12 páginas), Manual (29 páginas)

Imprimir página
IKEA RENGORA Manual de instruções
3.
LOAD THE RACKS (see LOADING THE RACKS)
4.
FILLING THE DETERGENT DISPENSER
ON/OFF
(see PROGRAMS TABLE).
5.
CHOOSE THE PROGRAM AND CUSTOMISE THE CYCLE
the new wash cycle and any desired options; Start the wash cycle
ENGLISH
START/Pause
DESCRIPTION)
ADDING EXTRA CROCKERY
6.
START
be ware of HOT steam!
Functions
Make sure the cap is screwed on tightly, so that no detergent can
get into the container during the wash program (this could damage
NATURALDRY
the water softener beyond repair).
Door opening system NaturalDry is a convection drying system
ACCIDENTAL INTERRUPTIONS
7.
END OF WASH CYCLE
As soon as this procedure is complete, run a program without
which automatically opens the door during/after drying phase to
loading. The "Pre-Wash" program alone is NOT
ensure exceptional drying performance every day. Door opens at the
flashing of the wash cycle number on the display. Open the
Residual saline solution or grains of salt can lead to corrosion,
temperature that is safe to your kitchen furniture.
irreparably damaging the stainless steel components.
Don't take out crockery immediately after door opens but wait in
The guarantee is not applicable if faults are caused by such
order to have proper drying.
circumstances.
The function cannot be activated for all the programs, please refer to
programs table.
heating element may be damaged as a result.
As additional steam protection, special designed protection foil is
Whenever you need to add salt, it is mandatory to complete
DELAY
added together with the dishwasher. To see how to mount protection
1. ECO - Normally soiled crockery. Standard program, the most efficient in terms of its combined energy and water
the procedure before the beginning of the washing cycle.
foil please refer to (ASSEMBLY INSTRUCTION).
consumption.
NaturalDry functionality could be disabled by the user as follows:
2. NORMAL - Mixed soil. For normally soiled dishes with dried food residues.
SETTING THE WATER HARDNESS
1
3. INTENSIVE - Program recommended for heavily soiled crockery, especially suitable for pans and saucepans (not to be used
1. Go to the Dishwasher software menu pressing and holding
To allow the water softener to work in a perfect way, it is essential
for delicate items).
button (6 sec).
that the water hardness setting is based on the actual water hard-
4. PRE-WASH - Use to refresh crockery planned to be washed later. No detergent to be used with this program.
appears on the display; each time you press the button,
2. You switched to NaturalDry Control Menu, you could change
ness in your house. This information can be obtained from your local
5. FAST - Normally soiled crockery. Everyday cycle, that ensures optimal cleaning performance in shorter time.
DELAY
DELAY
DELAY
DELAY
DELAY
DELAY
DELAY
DELAY
water supplier. The factory setting is for average (3) water hardness.
status of NaturalDry functionality by pressing button
6. SANITIZING - Normally or heavily soiled crockery, with additional antibacterial wash. Can be used to perform
E – enabled d – disabled
• Switch on the appliance by pressing the ON/OFF button.
maintenance of the dishwasher.
1
1
1
1
1
1
To confirm the change and exit from the Control Menu please
DELAY
DELAY
• Switch off the appliance by pressing the ON/OFF button.
7. SELF- CLEAN - Program to be used to perform maintenance of the dishwasher. It cleans the interior of the appliance
using hot water.
• Hold down button
for 5 seconds, until you hear a beep.
press and hold
button (3 sec).
appears on the display; each time you press the button,
appears on the display; each time you press the button,
appears on the display; each time you press the button,
appears on the display; each time you press the button,
appears on the display; each time you press the button,
appears on the display; each time you press the button,
appears on the display; each time you press the button,
appears on the display; each time you press the button,
• Switch on the appliance by pressing the ON/OFF button.
DELAY
DELAY
•
The current selection level number and the salt indicator light
DELAY
appears on the display; each time you press the button,
appears on the display; each time you press the button,
•
Press button
to select the desired hardness level (see
If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED
WATER HARDNESS TABLE).
and beeps will sound. The option will not be enabled.
(see CONTROL PANEL)
appears on the display; each time you press the button,
appears on the display; each time you press the button,
Water Hardness Table
HALF LOAD
appears on the display; each time you press the button,
DELAY
Level
German degrees
The DELAY function cannot be set once a wash cycle
1
Soft
TABLET (Tab)
has been started.
2
Medium
appears on the display; each time you press the button,
Remember to halve the amount of detergent.
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
3
Average
has been started.
has been started.
has been started.
has been started.
has been started.
has been started.
has been started.
has been started.
4
Hard

Programs table

The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
5
Very hard
has been started.
has been started.
• Switch off the appliance by pressing the ON/OFF button.
If you use powder or liquid detergent, this option
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
Setting is complete!
should be off.
The DELAY function cannot be set once a wash cycle
has been started.
has been started.
has been started.
Program
FILLING THE RINSE AID DISPENSER
should be filled when the RINSE AID REFILL indicator light
Eco
Eco
Eco
Eco
1
1
1
Eco
Eco
1
1
1
Eco
1
Eco
Eco
1
1
1 Eco
1
The DELAY function cannot be set once a wash cycle
has been started.
Conventional
Conventional
Conventional
2 Conventional
Conventional
Conventional
Conventional
Conventional
Conventional
2
Eco
Eco
2
2
1
1
Conventional
2
2
2
1
2
2
2
wash and dry
wash and dry
wash and dry
wash and dry
wash and dry
wash and dry
wash and dry
wash and dry
wash and dry
2
wash and dry
3
Conventional
Conventional
2
Intensive
Intensive
Intensive
Eco
The DELAY function cannot be set once a wash cycle
Eco
3
3
3
Intensive
Intensive
2
1
2
1
3 Intensive
3
3
Intensive
1
3
Intensive
Intensive
3
3
wash and dry
wash and dry
Eco
1
has been started.
4
Intensive
3
3
Conventional
Conventional
2
Fast
Fast
4
4
Fast
4
Fast
Fast
Fast
3
Intensive
3
Intensive
4 Fast Wash
4
4
4
2
2
1
Fast
Fast
4
4
Conventional
wash and dry
wash and dry
5
2
4
wash and dry
3
Fast
4
2
E
Sanitizing
Sanitizing
Sanitizing
d
5
5
5
Sanitizing
Sanitizing
Fast
Eco
Fast
5
5
Sanitizing
1
4
Intensive
B
4
Intensive
5
3
Sanitizing
3
Sanitizing
1
5
5
6
5 Sanitizing
5
Intensive
3
To confirm the change and exit from the Control Menu please
4
3
Conventional
2
7
Pre-Wash
Pre-Wash
6
6
6
Pre-Wash
Sanitizing
Sanitizing
Sanitizing
6
Pre-Wash
Pre-Wash
Pre-Wash
5
5
5
6
6
Fast
Fast
6
6 Pre-Wash
4
2
Pre-Wash
4
Pre-Wash
1
6
6
(110 ml) reference notch of the filling space - avoid spilling it.
wash and dry
5
4
Fast
4
3
7
2
Self-Clean
Self-Clean
7
7
Self-Clean
7
Self-Clean
Self-Clean
Pre-Wash
Pre-Wash
7
7
Self-Clean
6
Sanitizing
6
Sanitizing
7
5
Self-Clean
Intensive
5
Self-Clean
1
3
7
7
6
7 Self-Clean
NEVER pour the rinse aid directly into the tub.
Pre-Wash
5
6
Sanitizing
5
4
3
7
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
2
Self-Clean
Self-Clean
7
7
6
Fast
Pre-Wash
6
Pre-Wash
4
6
5
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address: dw_test_
Pre-Wash
6
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Self-Clean
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
4
7
3
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
7
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Self-Clean
Self-Clean
7
Sanitizing
7
5
6
Pre-treatment of the dishes is not needed before any of the programs.
5
Self-Clean
7
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
4
*) Not all options can be used simultaneously.
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
7
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many factors such as
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
Pre-Wash
6
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
6
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
5
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
selected options and sensor calibration.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
7
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
Self-Clean
7
6
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
1. ECO - Eco program is suitable to clean normally soiled tableware, that for this use, it is the most efficient program in terms of its combined
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
energy and water consumption, and that it is used to assess compliance with the EU Ecodesign legislation.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Pre-treatment of the dishes is not needed before any of the programs.
7
Pre-treatment of the dishes is not needed before any of the programs.
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
2. CONVENTIONAL WASH AND DRY - Mixed soil. For normally soiled dishes with dried food residues.
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
3. INTENSIVE - Program recommended for heavily soiled crockery, especially suitable for pans and saucepans (not to be used for delicate
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
items).
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
4. FAST WASH - Program for limited quantity of normally soiled crockery. Ensures optimal cleaning performance in shorter time.
load, load balancing, additional selected options and sensor calibration.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Pre-treatment of the dishes is not needed before any of the programs.
load, load balancing, additional selected options and sensor calibration.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
*) Not all options can be used simultaneously.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
PROGRAMS DESCRIPTION
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
ON/OFF
Make sure the cap is screwed on tightly, so that no detergent can
(see PROGRAMS
get into the container during the wash program (this could damage
the water softener beyond repair).
(see OPTIONS AND FUNCTIONS)
As soon as this procedure is complete, run a program without
START/Pause
Make sure the cap is screwed on tightly, so that no detergent can
loading. The "Pre-Wash" program alone is NOT
get into the container during the wash program (this could damage
Residual saline solution or grains of salt can lead to corrosion,
START/Pause
the water softener beyond repair).
irreparably damaging the stainless steel components.
As soon as this procedure is complete, run a program without
The guarantee is not applicable if faults are caused by such
loading. The "Pre-Wash" program alone is NOT
circumstances.
Residual saline solution or grains of salt can lead to corrosion,
irreparably damaging the stainless steel components.
The guarantee is not applicable if faults are caused by such
heating element may be damaged as a result.
START/Pause
circumstances.
Whenever you need to add salt, it is mandatory to complete
the procedure before the beginning of the washing cycle.
heating element may be damaged as a result.
SETTING THE WATER HARDNESS
Whenever you need to add salt, it is mandatory to complete
To allow the water softener to work in a perfect way, it is essential
the procedure before the beginning of the washing cycle.
that the water hardness setting is based on the actual water hard-
ness in your house. This information can be obtained from your local
SETTING THE WATER HARDNESS
water supplier. The factory setting is for average (3) water hardness.
To allow the water softener to work in a perfect way, it is essential
that the water hardness setting is based on the actual water hard-
• Switch on the appliance by pressing the ON/OFF button.
ness in your house. This information can be obtained from your local
• Switch off the appliance by pressing the ON/OFF button.
12
water supplier. The factory setting is for average (3) water hardness.
• Hold down button
• Switch on the appliance by pressing the ON/OFF button.
• Switch on the appliance by pressing the ON/OFF button.
•
The current selection level number and the salt indicator light
• Switch off the appliance by pressing the ON/OFF button.
• Hold down button
•
Press button
• Switch on the appliance by pressing the ON/OFF button.
WATER HARDNESS TABLE).
12
12
12
12
12
12
1
12
1
12
•
The current selection level number and the salt indicator light
•
Press button
to select the desired hardness level (see
1
12
1
12
Level
WATER HARDNESS TABLE).
DELAY
Water Hardness Table
1
1
12
To set a delayed start
1
12
1
12
DELAY
2
Medium
1
12
Level
appears on the display; each time you press the button,
3
Average
1
12
1
Soft
DELAY
4
Hard
rapidly 3 times
To set a half function
°dH
°fH
appears on the display; each time you press the button,
2
Medium
5
Very hard
1
French degrees
12
1
12
3
Average
DELAY
0 - 6
0 - 10
• Switch off the appliance by pressing the ON/OFF button.
appears on the display; each time you press the button,
4
Hard
To set the Multi tab function
7 - 11
11 - 20
1
Setting is complete!
12
5
Very hard
DELAY
12 - 17
21 - 30
appears on the display; each time you press the button,
FILLING THE RINSE AID DISPENSER
• Switch off the appliance by pressing the ON/OFF button.
18 - 34
31 - 60
1
12
The DELAY function cannot be set once a wash cycle
Setting is complete!
DELAY
35 - 50
61 - 90
has been started.
should be filled when the RINSE AID REFILL indicator light
appears on the display; each time you press the button,
1
12
FILLING THE RINSE AID DISPENSER
The DELAY function cannot be set once a wash cycle
DELAY
has been started.
appears on the display; each time you press the button,
Drying
Natural
should be filled when the RINSE AID REFILL indicator light
1
12
The DELAY function cannot be set once a wash cycle
phase
has been started.
appears on the display; each time you press the button,
The DELAY function cannot be set once a wash cycle
50°
50°
50°
50°
50°
50°
50°
50°
50°
Eco
50°
50°
has been started.
Conventional
55°
The DELAY function cannot be set once a wash cycle
55°
55°
55°
50°
50°
Eco
55°
55°
50°
55°
wash and dry
55°
55°
55°
has been started.
55°
Conventional
Intensive
65°
55°
The DELAY function cannot be set once a wash cycle
wash and dry
65°
65°
65°
55°
-
-
-
55°
65°
65°
50°
-
-
50°
Eco
65°
-
50°
65°
65°
-
65°
has been started.
50°
Fast
50°
65°
-
Intensive
65°
(110 ml) reference notch of the filling space - avoid spilling it.
Conventional
55°
The DELAY function cannot be set once a wash cycle
-
-
-
50°
50°
-
-
-
-
50°
-
-
wash and dry
50°
50°
50°
55°
65°
-
-
-
-
55°
65°
-
Eco
50°
50°
50°
-
50°
-
has been started.
Sanitizing
65°
55°
Fast
50°
Intensive
65°
Conventional
-
NEVER pour the rinse aid directly into the tub.
50°
-
55°
(110 ml) reference notch of the filling space - avoid spilling it.
-
65°
65°
65°
-
-
-
wash and dry
65°
65°
50°
50°
-
-
50°
-
Eco
65°
65°
-
65°
-
65°
50°
65°
-
Pre-Wash
-
65°
Sanitizing
65°
65°
-
Fast
50°
Intensive
65°
Conventional
55°
Self-Clean
65°
-
-
-
-
-
-
-
NEVER pour the rinse aid directly into the tub.
-
65°
-
-
-
-
-
65°
-
wash and dry
Pre-Wash
-
-
-
65°
-
-
-
-
-
Eco
55°
50°
-
50°
50°
-
-
-
-
-
-
Sanitizing
65°
-
50°
-
Fast
50°
Intensive
65°
Conventional
Self-Clean
65°
55°
65°
65°
-
-
-
-
-
65°
-
-
-
-
65°
65°
-
-
-
-
-
-
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
wash and dry
65°
65°
-
-
65°
-
Eco
Pre-Wash
65°
65°
50°
65°
-
-
-
65°
-
-
Sanitizing
-
65°
-
65°
-
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Fast
50°
Intensive
65°
Conventional
Self-Clean
65°
55°
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
-
Pre-treatment of the dishes is not needed before any of the programs.
65°
65°
-
-
-
wash and dry
50°
-
-
-
-
Pre-Wash
-
Sanitizing
65°
-
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Not all options can be used simultaneously.
-
-
Fast
-
50°
65°
-
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Intensive
65°
Self-Clean
65°
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Pre-treatment of the dishes is not needed before any of the programs.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
-
65°
65°
-
65°
-
Pre-Wash
-
load, load balancing, additional selected options and sensor calibration.
*) Not all options can be used simultaneously.
Sanitizing
65°
-
65°
-
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Fast
50°
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Self-Clean
65°
Pre-treatment of the dishes is not needed before any of the programs.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
-
-
-
Pre-Wash
-
load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION
*) Not all options can be used simultaneously.
Sanitizing
65°
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Self-Clean
65°
Pre-treatment of the dishes is not needed before any of the programs.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
-
65°
-
Pre-Wash
-
PROGRAMS DESCRIPTION
load, load balancing, additional selected options and sensor calibration.
*) Not all options can be used simultaneously.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Self-Clean
65°
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Pre-treatment of the dishes is not needed before any of the programs.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
PROGRAMS DESCRIPTION
load, load balancing, additional selected options and sensor calibration.
*) Not all options can be used simultaneously.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Pre-treatment of the dishes is not needed before any of the programs.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION
*) Not all options can be used simultaneously.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Pre-treatment of the dishes is not needed before any of the programs.
PROGRAMS DESCRIPTION
load, load balancing, additional selected options and sensor calibration.
To download the full version visit www.ikea.com
*) Not all options can be used simultaneously.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
MODIFYING A RUNNING PROGRAM
ON/OFF
the new wash cycle and any desired options; Start the wash cycle
START/Pause
ADDING EXTRA CROCKERY
be ware of HOT steam!
ADJUSTING THE DOSAGE OF RINSE AID
If you are not completely satisfied with the drying results, you can
ACCIDENTAL INTERRUPTIONS
START/Pause
Conventional wash and dry 55°
The current selection level number and rinse aid indicator light flash.
s.
NaturalDry
the dishwasher model. The factory setting is specific to the model,
for 5 seconds, until you hear a beep.
:
for 5 seconds, until you hear a beep.
to select the desired hardness level (see
NaturalDry
NaturalDry
NaturalDry
NaturalDry
NaturalDry
NaturalDry
NaturalDry
NaturalDry
FILLING THE DETERGENT DISPENSER
Water Hardness Table
°dH
NaturalDry
NaturalDry
dishwashers.
German degrees
Functions can be selected directly by pressing the corresponding
(see CONTROL PANEL)
Soft
0 - 6
button (see CONTROL PANEL).
useof detergent, rinse aid liquid and refined salt is required.
NaturalDry
NaturalDry
NaturalDry
°dH
7 - 11
NaturalDry
German degrees
French degrees
(INSTALLATION GUIDE)
(INSTALLATION GUIDE)
(INSTALLATION GUIDE)
(INSTALLATION GUIDE)
(INSTALLATION GUIDE)
(INSTALLATION GUIDE)
If an function is not compatible with the selected program
12 - 17
NaturalDry
0 - 6
TABLET (Tab)
(see PROGRAMS TABLE), the corresponding LED flashes
18 - 34
7 - 11
E
rapidly 3 times and beeps will sound. The function will not
35 - 50
NaturalDry
12 - 17
be enabled.
21 - 30
NaturalDry
To confirm the change and exit from the Control Menu please
18 - 34
31 - 60
E
d
E
E
d
d
E
E
d
d
E
d
E
E
d
NaturalDry
35 - 50
61 - 90
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
If you use powder or liquid detergent, this option
E
d
E
E
d
should be off.
NaturalDry
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
E
d
E
E
d
To confirm the change and exit from the Control Menu please
NaturalDry
E
d
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
Duration of
Duration of
Duration of
Duration of
Duration of
Duration of
Duration of
To confirm the change and exit from the Control Menu please
E
Duration of
d
Available
Duration of
NaturalDry
To confirm the change and exit from the Control Menu please
Dry
functions (*)
wash program
Duration of
(h:min)
(h:min)
(h:min)
(h:min)
(h:min)
(h:min)
**)
**)
**)
**)
**)
(h:min)
**)
Duration of
(h:min)
E
d
A
E
d
To confirm the change and exit from the Control Menu please
2:45
2:45
2:45
2:45
2:45
2:45
To confirm the change and exit from the Control Menu please
2:45
2:45
Duration of
(h:min)
Duration of
(h:min)
Duration of
B
E
d
To confirm the change and exit from the Control Menu please
2:00
2:00
2:00
2:00
2:45
2:00
2:00
2:45
2:00
2:00
A
(h:min)
(h:min)
Duration of
B
E
d
E
d
(h:min)
-
2:30
2:00
To confirm the change and exit from the Control Menu please
To confirm the change and exit from the Control Menu please
2:30
2:30
2:30
2:00
2:30
2:30
2:45
2:30
2:45
-
2:30
Duration of
2:45
-
(h:min)
-
0:55
Duration of
E
d
-
2:30
B
2:00
To confirm the change and exit from the Control Menu please
0:55
0:55
0:55
-
-
0:55
0:55
0:55
2:30
2:00
2:45
-
0:55
-
-
(h:min)
1:40
2:00
-
-
0:55
(h:min)
Duration of
-
2:30
2:00
-
B
1:40
1:40
1:40
-
1:40
1:40
0:55
-
1:40
2:45
2:30
-
-
1:40
2:45
-
0:10
-
-
1:40
2:30
-
-
0:55
(h:min)
Duration of
-
2:30
-
2:00
0:50
-
0:10
0:10
-
-
0:10
1:40
-
-
0:10
0:10
0:10
0:10
-
-
0:55
2:00
-
0:10
2:45
-
-
1:40
0:55
-
-
0:55
(h:min)
-
2:30
-
-
0:50
2:00
0:50
0:50
-
0:50
-
0:50
0:50
0:10
-
-
-
0:50
1:40
-
The detergent dispenser automatically opens up at the right time
-
0:50
2:30
2:45
0:10
-
-
1:40
1:40
according to the program. If all-in-one detergents are used, we
-
-
0:55
-
2:30
recommend using the TABLET button, because it adjusts the
-
-
0:50
2:00
-
-
0:50
-
-
-
0:10
0:55
-
0:10
program so that the best washing and drying results are always
-
1:40
0:10
-
-
0:55
achieved.
-
2:30
-
-
0:50
-
-
0:50
-
1:40
-
0:10
-
1:40
0:50
-
-
0:55
-
-
0:50
0:10
-
-
0:10
-
1:40
-
-
0:50
-
0:50
-
0:10
-
-
0:50
ON/OFF
ADJUSTING THE DOSAGE OF RINSE AID
If you are not completely satisfied with the drying res
ADJUSTING THE DOSAGE OF RINSE AID
START/Pause
If you are not completely satisfied with the drying results, yo
START/Pause
The current selection level number and rinse aid indica
s.
Eco 50°
The current selection level number and rinse aid indicator ligh
s.
Intensive 65°
the dishwasher model. The factory setting is specific t
Fast wash 50°
Sanitizing 65°
the dishwasher model. The factory setting is specific to the m
Pre-wash
Self-Clean 65°
FILLING THE DETERGENT DISPENSER
dishwashers.
FILLING THE DETERGENT DISPENSER
useof detergent, rinse aid liquid and refined salt is re
dishwashers.
useof detergent, rinse aid liquid and refined salt is required
°fH
(INSTALLATION GUIDE)
French degrees
0 - 10
rapidly 3 times
°fH
11 - 20
(INSTALLATION GUIDE)
(INSTALLATION GUIDE)
21 - 30
0 - 10
31 - 60
11 - 20
d
(INSTALLATION GUIDE)
(INSTALLATION GUIDE)
61 - 90
(INSTALLATION GUIDE)
(INSTALLATION GUIDE)
(INSTALLATION GUIDE)
d
(INSTALLATION GUIDE)
(INSTALLATION GUIDE)
d
(INSTALLATION GUIDE)
A
(INSTALLATION GUIDE)
Duration of
d
(INSTALLATION GUIDE)
B
Duration of
A
Water
A
(litres/cycle)
(INSTALLATION GUIDE)
consumption
(litres/cycle)
(litres/cycle)
(kWh/cycle)
(kWh/cycle)
Duration of
(litres/cycle)
(kWh/cycle)
(h:min)
(litres/cycle)
(litres/cycle)
(litres/cycle)
(kWh/cycle)
(kWh/cycle)
(kWh/cycle)
(litres/cycle)
**)
(litres/cycle)
(kWh/cycle)
(h:min)**)
To open the detergent dispenser
B
(h:min)
(litres/cycle)
(kWh/cycle)
**)
**)
(litres/cycle)
**)
press button A.
A
(INSTALLATION GUIDE)
12.0
12.0
0.92
0.92
12.0
0.92
2:45
12.0
12.0
0.92
0.92
12.0
12.0
0.92
2:45
12.0
12.0
2:45
(litres/cycle)
12.0
(litres/cycle)
12.0
0.92
(kWh/cycle)
Duration of
Introduce the detergent into
(h:min)
**)
(litres/cycle)
**)
(kWh/cycle)
**)
the dry dispenser B only.
15.0
1.35
(INSTALLATION GUIDE)
15.0
1.35
Place the amount of detergent
2:45
15.0
15.0
12.0
12.0
1.35
1.35
2:00
15.0
15.0
12.0
15.0
0.92
1.35
1.35
15.0
1.35
2:00
15.0
15.0
(litres/cycle)
(litres/cycle)
(kWh/cycle)
2:00
15.0
(h:min)
(litres/cycle)
(kWh/cycle)
**)
**)
for pre-washing directly inside
(litres/cycle)
(kWh/cycle)
B
**)
**)
15.0
1.50
the tub.
15.0
1.35
2:00
15.0
15.0
15.0
15.0
15.0
1.50
1.50
1.50
2:45
15.0
15.0
12.0
12.0
1.50
1.50
2:30
15.0
12.0
15.0
0.92
1.50
2:30
15.0
15.0
(litres/cycle)
12.0
(kWh/cycle)
**)
11.5
1.10
2:30
15.0
15.0
1.50
B
15.0
1.35
11.5
11.5
1.10
1.10
11.5
1.10
2:30
2:00
11.5
11.5
11.5
15.0
15.0
15.0
15.0
1.10
1.10
1.10
0:55
12.0
11.5
0.92
0:55
11.5
11.5
(litres/cycle)
(kWh/cycle)
11.5
1.30
(litres/cycle)
15.0
(kWh/cycle)
**)
11.5
1.10
**)
The detergent dispenser automatically opens up at
15.0
1.50
0:55
11.5
15.0
1.35
according to the program. If all-in-one detergents ar
11.5
11.5
11.5
1.30
1.30
1.30
0:55
11.5
11.5
11.5
11.5
1.30
1.30
2:30
11.5
15.0
12.0
15.0
1.30
1:40
1:40
12.0
11.5
11.5
11.5
0.92
4.5
0.01
11.5
1.30
recommend using the TABLET button, because it ad
(litres/cycle)
15.0
(kWh/cycle)
11.5
1.10
**)
program so that the best washing and drying results
15.0
1.50
The detergent dispenser automatically opens up at the righ
15.0
8.0
1.35
0.80
4.5
4.5
0.01
0.01
1:40
4.5
11.5
11.5
0.01
1:40
4.5
4.5
4.5
4.5
achieved.
0.01
0.01
0.01
0.01
11.5
0:55
15.0
11.5
11.5
0:10
0:10
12.0
4.5
4.5
0.92
4.5
according to the program. If all-in-one detergents are used
11.5
1.30
(litres/cycle)
(kWh/cycle)
11.5
11.5
1.10
**)
recommend using the TABLET button, because it adjusts t
15.0
1.50
8.0
0.80
15.0
1.35
program so that the best washing and drying results are al
8.0
8.0
0.80
0.80
8.0
0.80
0:10
8.0
8.0
4.5
4.5
0.80
0.80
1:40
8.0
11.5
11.5
0.80
0:50
0:50
12.0
4.5
15.0
8.0
8.0
0.92
0.01
8.0
0:10
11.5
achieved.
1.30
4.5
11.5
11.5
1.10
15.0
1.50
8.0
0.80
15.0
1.35
0:50
8.0
8.0
0:10
11.5
4.5
4.5
4.5
0.01
11.5
1.30
4.5
11.5
1.10
0:50
8.0
15.0
1.50
8.0
0.80
0:50
8.0
8.0
11.5
4.5
0.01
11.5
1.30
8.0
11.5
1.10
8.0
0.80
4.5
4.5
0.01
11.5
1.30
8.0
0.80
8.0
4.5
0.01
8.0
0.80
8
DOOR OPENING
after 150 min
end of cycle
end of cycle
N/A
N/A
N/A
N/A
To open the deterge
press button A.
Introduce the dete
the dry dispenser
To open the detergent disp
press button A.
Place the amount o
Energy
(kWh/cycle)
for pre-washing di
Introduce the detergent i
consumption
(kWh/cycle)
the tub.
the dry dispenser B only
(kWh/cycle)
Place the amount of dete
0.92
0.92
0.92
(kWh/cycle)
0.94
for pre-washing directly
the tub.
0.92
0.92
1.35
1.35
1.35
(kWh/cycle)
1.35
1.35
1.35
0.92
0.92
1.50
1.50
1.50
0.92
1.50
1.35
1.50
1.35
1.50
1.10
1.10
1.10
1.35
1.10
1.10
1.10
1.50
0.92
1.50
1.30
1.30
1.30
1.50
1.30
1.30
1.30
1.10
1.35
1.10
0.01
0.01
0.01
1.10
0.01
0.01
1.30
1.30
1.50
0.80
0.80
0.80
0.01
1.30
0.80
0.80
0.01
1.10
0.01
0.01
0.80
0.80
0.80
1.30
0.80
0.01
0.80