IKEA VALGJORD Manual - Página 12
Procurar online ou descarregar pdf Manual para Máquina de lavar loiça IKEA VALGJORD. IKEA VALGJORD 28 páginas.
Também para IKEA VALGJORD: Manual do utilizador (28 páginas)
ENGLISH
The rinse aid empty notification
When rinse aid chamber is empty, the rinse
aid indicator is turned on notifying to refill
rinse aid. If you are using multi-tabs
containing rinse aid and you are satisfied
with the drying result, you can deactivate
the notification for refilling rinse aid.
However, we recommend that you always
use rinse aid for best drying performance.
If you use standard detergent or multi-
tablets without rinse aid, activate the
notification to keep the rinse aid refill
indicator active.
How to deactivate the rinse aid empty
notification
The appliance must be in programme
selection mode.
1. To enter the user mode, press and hold
simultaneously
the indicators
to flash and the display is blank.
2. Press
.
• The indicators
off.
• The indicator
• The display shows the current setting:
= the rinse aid empty notification
is activated (factory setting).
3. Press
to change the setting.
= the rinse aid empty notification is
deactivated.
Before first use
1. Fill the rinse aid dispenser.
2. Open the water tap.
3. Start a program to remove any
processing residuals that can still be
inside the appliance. Do not use
detergent and do not load the baskets.
and
until
,
and
and
continues to flash.
4. Press the on/off button to confirm the
setting.
Acoustic signals
Acoustic signals sound when a malfunction
of the appliance occurs. It is not possible to
deactivate these acoustic signals.
There is also an acoustic signal that sounds
when the programme is completed. By
default this acoustic signal is activated but it
is possible to deactivate it.
How to deactivate the acoustic signal for
the end of programme
The appliance must be in programme
selection mode.
1. To enter the user mode, press and hold
simultaneously
the indicators
to flash and the display is blank.
2. Press
start
• The indicators
• The indicator
flash.
go
• The display shows the current setting:
= Acoustic signal on.
3. Press
= Acoustic signal off.
4. Press the on/off button to confirm the
setting.
and
,
and
and
continues to
to change the setting.
12
until
start
go off.