HIKVISION DS-7108HQHI-F1/N Manual de início rápido - Página 12
Procurar online ou descarregar pdf Manual de início rápido para DVR HIKVISION DS-7108HQHI-F1/N. HIKVISION DS-7108HQHI-F1/N 17 páginas. T710xqxtx series. turbohd dvr/camera kit
Imprimir página
1 2
S E T U P R E C O R D I N G ( c o n t i n u e d )
•
Substream
1.
- Video Quality adjusts picture clarity (high setting = four green squares is default).
Consider highest if hard drive space allows. Medium setting is a balance between good
picture and saving HDD space.
- Frame Rate sets recording frame rate The system defaults to record video continuously
at maximum frame rate. Consider adjusting to 8 fps for continuous and 15 fps for event
recording for optimum recording. Higher frame rates require more storage, but allow
better slow motion playback.
- Max Bitrate Mode chooses between pre-set bitrate values and customized values
(General setting is default).
- Max Bitrate (kbps) is the chosen bitrate for streaming the video. Max Bitrate should be
adjusted to meet or exceed the rate recommended by the system for the chosen
parameters.
- Max Bitrate Recommended is impacted by resolution, quality, and frame rate.
- Record Audio turns on audio recording. Requires connection of external microphone or
camera with built-in mic.
- Video Stream determines which stream is recorded. Leave at default (Main Stream).
Go to RECORDING CONFIGURATION > RECORD QUALITY > SUBSTREAM to set up
the Sub Stream to stream to mobile devices and display multiple cameras locally.
NOTE:
If the upload speed is not sufficient, lower the frame rate, bitrate,
and or resolution for more fluent mobile viewing.
RECORD (MAIN STREAM)
Select tab
CAMERA
Select IP camera
EVENT
For event recording only (motion
or alarm)
CONTINUOUS
For live view image and
continuous recording
VIDEO QUALITY
Select
to set quality (in example,
sensitivity is set to 3)
number of green squares