Avantco 178SS1F2HC Manual do utilizador - Página 5

Procurar online ou descarregar pdf Manual do utilizador para Congelador Avantco 178SS1F2HC. Avantco 178SS1F2HC 9 páginas. Reach-in refrigerators and freezers
Também para Avantco 178SS1F2HC: Manual do utilizador (8 páginas)

Imprimir página

Electrical

• Please ensure that the required voltage is being supplied at all times.

• The unit should be plugged into a grounded and properly-sized electrical outlet with

appropriate over-current protection. Please refer to the electrical requirements on the unit's

nameplate.

• The unit should have its own dedicated outlet.

• Do not use extension cords.

• Ensure the unit is not resting on or against the electrical cord.

• If the unit is not in use for a long period of time, please unplug the unit from the outlet.

• To avoid shock and fire hazards, do not plug in or unplug the unit with wet hands.

• After unplugging the unit, wait at least 10 minutes before plugging it back in. Failure to do so

could cause damage to the compressor.

Temperature Controls

Adjusting the Temperature

Your new refrigerator or freezer is already factory set to run at optimum temperatures for food

safety and should require no adjustments.

• Refrigerators are set to cycle between a minimum temperature of 33 degrees Fahrenheit and a

maximum temperature of 40 degrees Fahrenheit.

• Freezers are set to cycle between a minimum temperature of -5 degrees Fahrenheit and a

maximum temperature of 2 degrees Fahrenheit.

• Adjusting the temperature changes the minimum temperature at which your unit will run. Your

unit will not run constantly at this setting. To change it, follow these instructions:

Freezer Control

Digital Control Units

1. Hold "SET" for 1 second. The display will flash the current minimum temperature.

2. Use the arrow buttons to adjust the minimum temperature you'd like the unit to run at.

3. Press "SET" again to save your settings.

Always remember to calculate the differential if you change the minimum temperature setting.

The cabinet temperature will fluctuate up to 7 degrees Fahrenheit over your set minimum

temperature as the compressor runs and shuts off. Setting the temperature too high will result

in unsafe maximum temperatures and possible health code violations.

User Manual

SS Series Reach-In Refrigerators and Freezers

Refrigerator Control

Prg

mute

aux

Set

def

set