ALIBI ALI-IPU3230R Manual de instalação rápida - Página 4
Procurar online ou descarregar pdf Manual de instalação rápida para Câmara de segurança ALIBI ALI-IPU3230R. ALIBI ALI-IPU3230R 5 páginas. Ip bullet camera
Imprimir página
Some computer security software may attempt to block you from running WebComponents.exe.
If necessary, open the Internet Explorer downloads list, right click on the WebComponents.exe file
name, then click Run Anyway.
NOTE
b.
In the Setup - WebComponents window opens, click Next to continue.
Installing the WebComponents plugin may require that you close the browser. Follow the
on-screen instructions, then restart your browser after the installation is finished.
c.
Allow the plug-in installation to complete. When the following window appears, click
Finish.
After logging into the camera, the Live View - Main stream window will appear.
Live View options
Screen select tabs
4
www.observint.com
Live View image
Logout button
Capture, Record, Enable e-PTZ icons
Step 5.
Adjust the camera for your surveillance target
1.
While observing live video from your camera, unscrew the Pan, Tilt and Rotation lock screws
at least two turns using the security L-wrench provided, then move the camera to point at the
center of your surveillance target. Tighten the lock screws to hold the camera in position.
Pan lock screw - Pan: 0˚ ~ 360˚
Tilt lock screw
Tilt: 0˚ ~ 100˚
Rotation lock screw
Rotation: 0˚ ~ 360˚
Step 6.
Setup the video image
The video Display Settings menu includes the image-related configurable parameters for the camera.
It contains several sub-menus such as Image Adjustment, Exposure Settings, Day/Night Switch, etc.
that can be opened or closed for compactness. Additionally, several adjustments can be seen in the
Live View image on the menu. To open the Display Settings menu, go to Setup tab | Image | Display
Settings
Configurable parameters include:
Switch Day and Night: Select either Auto-Switch or Scheduled-Switch.
•
If using Auto-Switch, open the Day/Night Switch submenu to select the Sensitivity,
—
Filtering Time, and Smart IR feature ON or OFF.
If using Scheduled Switch, set the Start Time and End Time of the switch, then open
—
the Day/Night Switch submenu to select the Smart IR feature ON or OFF.
Also, click the Common, Day and Night tabs to set the Saturation, Hue, Brightness,
Contrast and Sharpness for Day and for Night modes.
© 2015 Observint Technologies. All rights reserved.