Garage Smart Hard Top Lifter Manual do utilizador - Página 11
Procurar online ou descarregar pdf Manual do utilizador para Sistemas de elevação Garage Smart Hard Top Lifter. Garage Smart Hard Top Lifter 20 páginas.
Imprimir página- 1. Table of Contents
- 2. Safety Information/About Hardtop Lifter
- 3. Product Identifier
- 4. What's in the Box
- 5. Hardtop Lifter Installation Tools and Notes
- 5. Step 1: Smarttrack
- 5. Smarttrack Troubleshooting
- 5. Step 2: Assembly - Length Adjuster
- 5. STEPS 3 & 4: ASSEMBLY - WIDTH ADJUSTER and FOAM BLOCKS
- 5. Step 5: Assembly - Pulley Slider
- 5. Step 6: Assembly - Vehicle Installation
- 5. Step 7: Assembly - Cargo Net and Configuration
- 5. Step 8: Assembly - Adjustments
- 6. Faqs
- 7. Warranty
HARDTOP LIFTER INSTALLATION
3. Width Adjuster
1. Slide the narrow width adjusters (with the hook ends)
into the wider ones and through the square end of the
length adjuster. The short width adjusters (D) go in back
and the long ones (E) in front.
2. Place long pins (F) so that each pin holds three parts in
place. Adjustments can be made later. (Fig 3.2)
NOTE
The front and back half of the frame are still not
(Fig 3.3)
connected.
4. Foam Blocks
1.
Slide the foam blocks (H) onto the width adjusters in
the positions shown. (Fig 4.1)
Front
ASSEMBLY
Front
Fig 3.2
H
Back
9
Back
Fig 3.3
Fig 4.1