CORNING 6782 Manual de instruções - Página 5

Procurar online ou descarregar pdf Manual de instruções para Equipamento de laboratório CORNING 6782. CORNING 6782 8 páginas. Low speed orbital shaker

Imprimir página

4.0 Operating Instructions

4.1 Controls

1. POWER switch: Turns the shaker ON (power switch illuminates) or OFF

2. SPEED knob: Sets the shaker speed

3. TIME knob: Sets the time of the shaker

4. HOLD yellow light: Illuminates when the shaker is set for continuous running

5. START/STOP button: START or STOP shaking

6. RUN green light: Illuminates when the shaker is running

4.2 Basic Operation

Switch on POWER.

Set SPEED knob on desired value.

Set TIME knob on desired value or on HOLD – continuous function (yellow light next to

HOLD will illuminate).

Press START/STOP button to start shaking.

Press START/STOP button to stop shaking (HOLD position). Device automatically stops after

the set time passes. NOTE: Pressing the START/STOP button during operation will reset the

timer.

5.0 Troubleshooting Guide

Be sure to disconnect the shaker from the main power source immediately in case of any

signs of malfunction and contact Corning Customer Service at 800.492.1110 or 978.442.2200.

Problem

Power switch does not light up

Shaker does not start

Solution

Check the power connection. Check the fuses.

Contact Corning Customer Service.

Check the power connection. Check the fuses.

Contact Corning Customer Service.

Instruction Manual