Avantco Equipment 177CHSME32IM Manual do utilizador - Página 5

Procurar online ou descarregar pdf Manual do utilizador para Utensílios de cozinha Avantco Equipment 177CHSME32IM. Avantco Equipment 177CHSME32IM 6 páginas. Electric cheese melters

Imprimir página

Wall-Mounting Installation Instructions

WARNING

•

The Cheese Melter must be installed in accordance with:

State and local codes.

2. National Electrical Code, ANSI/NFPA-70 (latest edition).

•

To reduce the risk of fire, the appliance is to be installed in non-combustible surroundings only,

with no combustible material within 18" of the sides, front, or rear of the appliance or within 40"

above the appliance.

PARTS INCLUDED:

Wall Brackets: (2)pcs

•

Each wall bracket must be installed

with (4)¼" lag screws (not provided).

INSTALLATION PROCEDURE:

We recommend that the unit wall-mount

must be installed by a qualified professional.

Installation by unqualified personnel may void

the unit warranty.

2. The wall brackets must be fastened to a wall

with studs or a concrete wall which can hold

the machine.

3. Determine the height for the unit installation.

Mark the wall at the desired height.

4. Mark the locations for 8pcs lag screws.

Drill as necessary.

5. We recommend using ¼" thick and 2½" long

lag screws.

6. The types of the lag screws are depended

according the material and structure of the

wall. A qualified professional is necessary to

make decision.

Center and level the wall brackets.

8. Insert (4) lag screws through each wall

bracket and fit it in the wall.

9. Tighten each lag screw securely.

10. Lift the machine and hook the hooking

key holes on the back of the unit onto the

hanging hook (which are welded on the top

of the wall brackets).

11. Check and test to make sure the unit hooking

key holes and hook are secure by applying

slight pressure to test.

NOTE: Wall-mounting brackets have a maximum weight

capacity of 30 lb. (excluding the weight of the machine).

User Manual

Electric Cheese Melters