Avantco Equipment 177CHSME32M Manual do utilizador - Página 5

Procurar online ou descarregar pdf Manual do utilizador para Utensílios de cozinha Avantco Equipment 177CHSME32M. Avantco Equipment 177CHSME32M 9 páginas. Electric cheese melters

Imprimir página

Cleaning and Maintaining

CLEANING - NOTE: To maintain cleanliness and increase service life, this item should be cleaned daily. Do not

immerse the unit in water or any other liquid, if liquid enters the electrical compartment it may

cause a short circuit or electrical shock.

1. Before cleaning or attempting to move this item, turn off, unplug and let the unit cool completely.

2. Clean the appliance with a damp cloth using water and soap or detergents, provided that they are not acidic or

abrasive. If the electric salamander is very dirty, use a synthetic scrub sponge.

a. Note: Do not rub the appliance with steel wool pads as they could leave rust stains.

b. We recommend using Noble Chemical's Spiffy Shine metal polish to clean and polish the outside of your

electric salamander. This gentle cleanser is safe to use and doesn't contain any harsh abrasives.

c. Never use direct water jets to clean the appliance because this could result in water entering into it and

damaging it.

3. Rinse it off with clean water and wipe the entire unit with a clean soft cloth until it is completely dry.

4. The stainless steel drip tray and cooking grate can be removed for easier cleaning.

5. If soap or chemical cleaners are used, be sure they are completely rinsed away with clean water immediately after

cleaning. Chemical residue could damage or corrode the surfaces of the unit.

To avoid serious injury or damage, never attempt to repair or replace a damaged power cord yourself.

Troubleshooting

Problem

Heating element turns on but

indicator light is off

The heating elements

do not work

www.AvantcoEquipment.com

Possible Causes

Not a good connection to the outlet or the

fuse has blown or the indicator light is broken

Either the indicator light is malfunctioning

or the circuit connection is loose

Either the heating elements are broken or the

thermostat is malfunctioning

User Manual

Action

Check the outlet connection or fuse box. If the

indicator light is broken, replace the light.

Replace the indicator light or reconnect the wiring

at the loose point

Replace the heating element or thermostat