Makita 4131 Manual de instruções - Página 9
Procurar online ou descarregar pdf Manual de instruções para Ferramenta eléctrica Makita 4131. Makita 4131 12 páginas. Metal cutter
Também para Makita 4131: Manual de instruções (12 páginas), Manual de instruções (14 páginas), Manual de instruções (12 páginas), Manual de instruções (12 páginas)
Imprimir página
Inspecting saw blade
•
Check the blade carefully for cracks or damage
before and after each use. Replace a cracked or
damaged blade immediately.
•
Continuing to use a dull blade may cause a dan-
gerous kickback and/or motor overload. Replace
with a new blade as soon as it no longer cuts
effectively.
•
Carbide-tipped saw blades for metal cutter
cannot be re-sharpened.
Replacing carbon brushes
► 1 . Limit mark
Remove and check the carbon brushes regularly.
Replace when they wear down to the limit mark. Keep
the carbon brushes clean and free to slip in the holders.
Both carbon brushes should be replaced at the same
time. Use only identical carbon brushes.
Use a screwdriver to remove the brush holder caps.
Take out the worn carbon brushes, insert the new ones
and secure the brush holder caps.
Carbide-Tipped Metal Blades for Many Applications
METAL SHEET
Size (mm)
t=1.5
t=3.0
X
185X36T
185X38T
185X48T
185X70T
1
C-STUD
ANGLE-STUD
50X100
45X90
50X50
50X50
t=1.6
t=3.2
t=4
t=6
X
X
X
X
X
► 1 . Screwdriver 2. Brush holder cap
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be per-
formed by Makita Authorized Service Centers, always
using Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION:
•
These accessories or attachments are recom-
mended for use with your Makita tool specified
in this manual. The use of any other accessories
or attachments might present a risk of injury to
persons. Only use accessory or attachment for
its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
•
Rip fence (Guide rule)
•
Safety goggle
•
Recommended Carbide-tipped saw blades &
workpiece ranges
NOTE:
•
Some items in the list may be included in the
tool package as standard accessories. They
may differ from country to country.
Applications
METAL STUD
REBAR
t=0.56
t=1.6
50X100
25 Ga
16 Ga
20
t=3.2
X
X
X
X
Excellent
Good
9 ENGLISH
1
CORRUGATED
PIPE
SHEET
25
60
t=1.0-2.0
t=1.2
t=3.8
t=0-0.9
X
X
X
X
X
X
X
X
Fair
Not Applicable
2