Makita 4303C Manual de instruções - Página 4

Procurar online ou descarregar pdf Manual de instruções para Ferramenta eléctrica Makita 4303C. Makita 4303C 16 páginas. Electronic jig saw

VOLTAGE WARNING: Before connecting the tool to a power source (receptacle,

outlet, etc.) be sure the voltage supplied is the same as that specified on the

nameplate of the tool. A power source with voltage greater than that specified

for the tool can result in SERIOUS INJURY to the user

as well as damage to

the tool. If in doubt, DO NOT PLUG IN THE TOOL. Using a power source with

voltage less than .the nameplate rating is harmful to the motor.

ADDITIONAL SAFETY RULES

1. Avoid cutting nails. Inspect for and remove all nails from the workpiece be-

2. Don't cut hollow pipe.

Do not cut oversize workpiece.

4. Check for the proper clearance beneath the workpiece before cutting so that

5. Hold the tool firmly.

6. Make sure the blade is not contacting the workpiece before the switch is

7. Keep hands away from moving parts.

When cutting through walls, floors or wherever "live" electrical wires may

be encountered, DO NOT TOUCH ANY METAL PARTS OF THE TOOL!

Hold the tool only by the insulated grasping surfaces to prevent electric shock

if you cut through

"live" wire.

fore operation.

the blade will not strike the floor, workbench, etc.

turned on.

Do not leave the tool running. Operate the tool only when hand-held.

IO.

Always switch off and wait for the blade to come to a complete stop before

11. Do not touch the blade or the workpiece immediately after operation; they

removing the blade from the workpiece.

may be extremely hot and could burn your skin.

SAVE THESE INSTRUCTIONS.