Makita 4322 Manual de instruções - Página 7
Procurar online ou descarregar pdf Manual de instruções para Ferramenta eléctrica Makita 4322. Makita 4322 17 páginas.
Também para Makita 4322: Manual de instruções (19 páginas)
Imprimir página
1
2
3
1. Retainer
2. Blade
3. Roller
4. Base
5. Bolt
6. Hex wrench
1
1. Dust cover
OPERATION
1
2
1. Cutting line
2. Base
Adjusting roller
002728
Loosen the bolt on the back of the base with the hex wrench. Move the
retainer so that the roller contacts the blade lightly. Then tighten the bolt to
6
secure the base and the retainer.
5
4
NOTE:
•
Occasionally lubricate the roller.
Dust cover
002729
CAUTION:
•
Always wear safety goggles even when operating the tool with the dust
cover lowered.
Lower the dust cover to prevent chips from flying. However, when making
bevel cuts, raise it all the way.
CAUTION:
•
Always hold the base flush with the workpiece. Failure to do so may
cause blade breakage, resulting in a serious injury.
•
Advance the tool very slowly when cutting curves or scrolling. Forcing
the tool may cause a slanted cutting surface and blade breakage.
Turn the tool on without the blade making any contact and wait until the blade
002743
attains full speed. Then rest the base flat on the workpiece and gently move
the tool forward along the previously marked cutting line.
7