Makita 4323 Manual de instruções - Página 2
Procurar online ou descarregar pdf Manual de instruções para Ferramenta eléctrica Makita 4323. Makita 4323 17 páginas. Makita 4323 jig saw: specifications
Também para Makita 4323: Manual de peças (2 páginas), Manual de instruções (19 páginas)
Imprimir página
SPECIFICATIONS
Model
Length of stroke
Max. cutting capacities
Strokes per minute (min
Overall length
Net weight
Safety class
• Due to our continuing programme of research and development, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
SYMBOLS
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
...................Read instruction manual.
...................DOUBLE INSULATION
..................Only for EU countries
Do not dispose of electric equipment
together
material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life
must be collected separately and
returned
compatible recycling facility.
Intended use
The tool is intended for the sawing of wood, plastic and
metal materials.
As a result of the extensive accessory and saw blade
program, the tool can be used for many purposes and is
very well suited for curved or circular cuts.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
2
Wood
Mild steel
-1
)
END201-2
with
household
waste
equipment
and
to
an
environmentally
4322
18 mm
65 mm
6 mm
3,100
207 mm
1.8 kg
For European countries only
Noise and Vibration
The typical A-weighted sound pressure level is 83 dB (A).
Uncertainty is 3 dB(A).
The noise level under working may exceed 85 dB (A).
– Wear ear protection. –
The typical weighted root mean square acceleration
2
value is 5 m/s
.
These values have been obtained according to
EN60745.
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product
is in compliance with the following standards of stand-
ardized documents, EN60745, EN55014, EN61000 in
accordance with Council Directives, 89/336/EEC, 98/37/
its
EC.
Yasuhiko Kanzaki CE 2005
MAKITA INTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND
Responsible manufacturer:
Makita Corporation Anjo Aichi Japan
4323
18 mm
65 mm
6 mm
500 - 3,100
207 mm (Steel base type)
213mm (Aluminum base type)
1.8 kg (Steel base type)
1.9 Kg (Aluminum base type)
/II
Director