Garage Tek GT100010A Manual de instalação - Página 5
Procurar online ou descarregar pdf Manual de instalação para Armazenamento Garage Tek GT100010A. Garage Tek GT100010A 16 páginas. Garage overhead storage racks
Imprimir página
STEP 1: 4FTX 6FT RACK-FOR CEILING BRACKET INSTALLATION (WOOD JOIST)
WE PROVIDED WOOD SCREWS AND SOLID CONCRETE CEILING ANCHORS FOR THIS INSTALLATION.
PLEASE DETERMINE THE TYPE OF CEILING YOU HAVE BEFORE STARTING.
WOOD JOIST:
A: USE A STUD FINDER TO LOCATE THE CEILING WOOD JOISTS.
NOTE: USE THE DRILL TEMPLATE TO MARK THE MOUNTING HOLES FOR INSTALLATION.
A1: START FROM THE LEFT, PLACE THE DRILL TEMPLATE AND MARK THE (2) HOLES AT CENTER OF THE JOIST LOCATIONS.
A2: FROM THE (1) END MEASURE 72", PLACE THE DRILL TEMPLATE AND MARK THE NEXT SET OF (2) HOLES.
B: PILOT HOLES FOR WOOD JOIST: USE A 11/64" (4.5mm) DIA. DRILL BIT AND DRILL A 2 3/8" (60mm) DEEP HOLE FOR
EACH SCREW.
C: FASTEN THE CEILING BRACKETS WITH THE WOOD SCREW. USE A DRILL & SUPPLIED NUT DRIVER.
REUSE THE DRILL TEMPLATE TO MARK MOUNTING HOLES ON THE CEILING
CEILING JOISTS
DRILL MARKED MOUNTING HOLES
(2) MOUNTING HOLES REQUIRED
PER CEILING BRACKET
72.000in
1828.80mm
KEEP EACH SET OF CEILING BRACKETS IN A STAIGHT LINE
48.000IN
[1219.20mm]
11/64"
[
4.5mm]
MOUNTING HOLE DIMENSIONS
MARKED MOUNTING HOLE
WITH PENCIL
WOOD
SCREW
WOOD
SCREW
2 3/8"
[60mm]
CEILING
JOIST
CEILING
BRACKET
SUPPLIED
NUT DRIVER
DRILL
PAGE 5