FRIGOGLASS R134a Manual do utilizador - Página 7

Procurar online ou descarregar pdf Manual do utilizador para Congelador FRIGOGLASS R134a. FRIGOGLASS R134a 14 páginas.

If the supply cord is damaged, it must be replaced by the

manufacturer, its service provider or similarly qualified

persons in order to avoid a hazard.

The merchandiser must stand upright for at least 1 hour after transportation and

prior to start up.

Ensure that there is a spacer to maintain a distance between the back side of the

ICM and the wall, and that nothing is placed on top of the ICM.

Do not use electrical appliances inside the cooler.

Allow a minimum gap of 100mm at the rear and 50mm at the sides of the cooler.

Assemble the spacer supplied with the appliance to adjust the correct distance

from the rear walls. Do not place anything on top of the ICM.

3.2 Connection to the mains supply

Connect the ICM to a 120 Volts, 60Hz power supply on a min 10A fused & grounded

socket. Do not use extension cables. If the power cord is not long enough, ask an

authorized electrician to replace it with a longer one, or to install a socket near the

ICM.

Do not compress the main cable.

If the supply cord is damaged, it must be replaced by the

manufacturer, its service provider or similarly qualified

persons in order to avoid a hazard.

PRIOR TO ANY CLEANING OR MAINTENANCE PROCEDURE,

UNPLUG THE ICM!

DO NOT DAMAGE THE REFRIGERANT CIRCUIT.

ENG