Makita 5090D Manual de instruções - Página 5

Procurar online ou descarregar pdf Manual de instruções para Ferramenta eléctrica Makita 5090D. Makita 5090D 17 páginas. 85mm with fast charger
Também para Makita 5090D: Lista de peças (1 páginas), Repartição das peças (2 páginas)

Imprimir página

IMPORTANT SAFETY INSTRUCTIONS

continued

Length of Cord (Feet)

AWG Size of Cord

FOR CORD

100

150

1. To reduce risk of damage to electric plug and cord, pull by plug rather than

by cord when disconnecting charger.

Make sure cord

located

that it will not be stepped on, tripped over, or

otherwise subjected to damage or stress.

3. An extension cord should not be used unless absolutely necessary.

Use of improper extension cord could result in a risk of fire and electric shock.

If extension cord must be used, make sure that:

i. Pins on plug of extension cord are the same number, size, and shape

as those of plug on charger.

ii. Extension cord is properly wired and in good electrical condition.

iii. Wire size is at least as large as the one specified in the table below.

RECOMMENDED MINIMUM AWG SIZE FOR

EXTENSION CORDS FOR BATTERY CHARGERS

FOR CORD AND CHARGER

1. Do not operate charger with damaged cord or damaged plug

replace

them immediately.

SAVE THESE INSTRUCTIONS