Makita 5093DZ Manual de instruções - Página 16

Procurar online ou descarregar pdf Manual de instruções para Ferramenta eléctrica Makita 5093DZ. Makita 5093DZ 20 páginas. 85 mm (3-3/8”)

Guide rule

The handy guide rule allows you to do

extra-accurate straight cuts. Simply slide

the guide rule up snugly against the side of

the workpiece and secure it in position with

the clamp screw on the front of the base. It

also makes repeated cuts of uniform width

possible.

MAINTENANCE

CAUTION:

Always be sure that the tool is switched off and the battery cartridge is removed before

attempting to perform inspection or maintenance.

To maintain product SAFETY and RELIABILITY, repairs, maintenance or adjustment should

be performed by Makita Authorized or Factory Service Centers, always using Makita

replacement parts.

Trickle charge (Maintenance charge)

If you leave the battery cartridge in the charger to prevent spontaneous discharging after

full charge, the charger will switch into its "trickle charge (maintenance charge)" mode and

keep the battery cartridge fresh and fully charged.

Tips for maintaining maximum battery life

1. Charge the battery cartridge before completely discharged.

Always stop tool operation and charge the battery cartridge when you notice less tool

power.

2. Never recharge a fully charged battery cartridge.

Overcharging shortens the battery service life.

3. Charge the battery cartridge with room temperature at 10°C - 40°C (50°F - 104°F).

Let a hot battery cartridge cool down before charging it.