CORNING UAT3 Manual de Instruções - Página 12

Procurar online ou descarregar pdf Manual de Instruções para Ferramentas CORNING UAT3. CORNING UAT3 18 páginas.

7.6

To complete the final blade depth adjustment:

a. With both blades scoring, but not penetrating

the central tube, rotate the fine adjustment

wheels clockwise to increase the blade depths

(Figure 14).

Advance the tool 3 in and recheck the depths of

the cuts.

Repeat this process until either the blades are

slitting the central tube or the fine adjustment wheels have

reached their maximum.

b. If the fine adjustments are "maxed" out

before the central tube is slit, then return

the fine adjustment to its minimum setting

(fully counterclockwise) and turn the coarse

adjustment wheel clockwise (increasing blade

depth) to the next 0.2 mm increment

(Figure 15).

c. Repeat this adjustment process until both blades just slit

the central tube. Once a blade has penetrated a central tube,

retract the blade slightly so that it no longer slits the central

tube, but scores it without slitting it. When properly scored,

but not penetrated, the tubes should easily peel apart.

Using the Tool

7.7

With the blade depths set, turn the handle to advance the tool

to the end of the cut (Figure 16).

End point

Standard Recommended Procedure 004-074 | Issue 12 | May 2017 | Page 12 of 18

Figure 14

Figure 15

Figure 16