Avante U-3000 Manual do utilizador - Página 12

Procurar online ou descarregar pdf Manual do utilizador para Leitor de cartões Avante U-3000. Avante U-3000 13 páginas.

(Where the "To" and "From" characters are numbers and the unit is in MHz. The Ratio characters are

2. Use the

Left arrow key (*) or

Then, use the keypad to enter a number; once a character is changed, the cursor moves to the next

character. Press on the OK key to save the changes; a "Waiting" message will appear on-screen. Then a

"list 00/00" title will appear on the top of the screen.

SET POWER

The Set Power menu item allows the user to set the scanning power attenuation.

To change the Power setting, do the following:

1. Press on the OK key when the Power option is highlighted. The power is displayed as follows:

(Where the characters can range from 00 to 99 and the units are in decibels)

2. Use the

Left arrow key (*) or

Then, use the keypad to enter a number; once a character is changed, the cursor moves to the next

character. Press on the OK key to save the changes; a "Set successful" message will appear at the bottom

of the screen.

The Sensitivity menu item allows the user to set the receiving sensitivity attenuation.

To change the Sensitivity setting, do the following:

1. Press on the OK key when the Sensitivity option is highlighted. The power is displayed as follows:

(Where the characters can range from 00 to 99 and the units are in decibels)

2. Use the

Left arrow key (*) or

Then, use the keypad to enter a number; once a character is changed, the cursor moves to the next

character. Press on the OK key to save the changes; a "Set successful" message will appear at the bottom

of the screen.

The Net Config option allows for configuration of the network settings for the unit.

To adjust the network settings for the unit, do the following:

numbers and the units are in Percent)

Right arrow key (#) to move to the character you wish to change.

- XX dB

Right arrow key (#) to move to the character you wish to change.

- XX dB

Right arrow key (#) to move to the character you wish to change.

U-3000 Reader

2011

12 |

P a g e