Makita 5705R Informações técnicas - Página 3

Procurar online ou descarregar pdf Informações técnicas para Ferramenta eléctrica Makita 5705R. Makita 5705R 5 páginas. 165/190/235 mm
Também para Makita 5705R: Manual (15 páginas), Manual de instruções (13 páginas), Manual de instruções (13 páginas), Manual de instruções (12 páginas), Manual de instruções (13 páginas), Manual de instruções (16 páginas), Manual de instruções (13 páginas)

epair

( 4 ) Further pull the base down, and pull out riving knife holder together with riving knife along

the flat surface of the bearing box as illustrated in Fig. 3.

And then, separate base from the motor section after taking off pin 10 which is joining base and motor section.

Riving knife

< 3 > Disassembling gear section

( 1 ) Take off 2 pcs. of countersunk head screws M5x16. Then the gear section can be separated from blade case.

See Fig. 4. And set the gear section on the turn base of arbor press and press a round bar set on the spindle down

with arbor press as illustrated in Fig. 4A. Then, spindle can be separated from the gear section. See Fig. 4B.

Fig. 4

Countersunk head

screws M5x16

Gear section

Fig. 4B

Riving knife holder

* Link

Pin 10

Fig. 3

Press

Ball bearing 6002DDW

Spindle

Helical gear 41

Ball bearing 608

Fig. 4A

Minimum. 14mm

60mm

Bearing box

< Note 1 >

* Link is an integral part of base.

< Note 2 >

Do not forget to join link and riving

knife holder as illustrated in Fig.1A,

when assembling.

Press

Max. 11mm

Turn base of arbor press

P 3 / 5

Round bar

Spindle

Bearing box