Avantes AvaLight-CAL-AR-MINI Manual - Página 6

Procurar online ou descarregar pdf Manual para Equipamento de iluminação Avantes AvaLight-CAL-AR-MINI. Avantes AvaLight-CAL-AR-MINI 12 páginas.

SMA-plug

Connect the SMA connector of the fiber to the SMA-plug of the Light Source.

I/O connector

The signals on the I/O connector are described below.

Pin configuration

Name

GND

Disable

Input

Below the electrical characteristics for the input signals

Electrical characteristics

Name

Disable

2.2 12VDC power plug

The power supply specifications are mentioned in the table below

Name

Voltage

Power

With the disable function that is present on the I/O connector the user can disable the optical

output of the light source by setting this signal to high-level.

To use the disable function the ON-OFF switch must be set in the ON mode.

When the light source is used in combination with an AvaSpec spectrometer, interface cable IC-

DB26-2 and AvaSoft, the optical output can be changed by AvaSoft. It is also possible to disable and

enable the light source by AvaSoft.

Revision: 2-00

Description

Ground

Input, used to disable/shut down the light source

Low level detection

< 1.0V

Minimum

10V

3Watt

www.avantes.com

High level detection

> 2.0V

Typical

12V

Maximum voltage

12.0V

Maximum

15V