Makita 6905B Manual de instruções - Página 5

Procurar online ou descarregar pdf Manual de instruções para Ferramenta eléctrica Makita 6905B. Makita 6905B 8 páginas. 12.7 mm (1/2")
Também para Makita 6905B: Manual de instruções (13 páginas), Repartição das peças (2 páginas), Manual de instruções (8 páginas), Manual de instruções (20 páginas), Manual de instruções (7 páginas), Manual de instruções (11 páginas)

Imprimir página

ASSEMBLY

CAUTION:

•

Always be sure that the tool is switched off and

unplugged before carrying out any work on the

tool.

Installing side grip

► 1. Side grip

For 6906 only

Fit the side grip into the groove on the middle of the

hammer case and fasten securely.

Selecting correct socket

Always use the correct size socket for bolts and nuts.

An incorrect size socket will result in inaccurate and

inconsistent fastening torque and/or damage to the bolt

or nut.

Installing or removing socket

► 1. Socket 2. Anvil

For socket without O-ring and pin

To install the socket, push it onto the anvil of the

tool until it locks into place.

To remove the socket, simply pull it off.

For socket with O-ring and pin

► 1. Socket 2. O-ring 3. Pin

Move the O-ring out of the groove in the socket and

remove the pin from the socket. Fit the socket onto the

anvil of the tool so that the hole in the socket is aligned

with the hole in the anvil. Insert the pin through the hole in

the socket and anvil. Then return the O-ring to the original

position in the socket groove to retain the pin. To remove

the socket, follow the installation procedures in reverse.

OPERATION

For 6906 only

Always use the side grip (auxiliary handle) and firmly hold

the tool by side grip and switch handle during operations.

The proper fastening torque may differ depending upon

the kind or size of the bolt, the material of the workpiece

to be fastened, etc. The relation between fastening

torque and fastening time is shown in the figures.

(kg cm)

N m

700

(7140)

600

(6120)

500

(5100)

400

(4080)

300

(3060)

200

(2040)

100

(1020)

Hold the tool firmly and place the socket over the bolt or

nut. Turn the tool on and fasten for the proper fastening

time.

NOTE:

•

Hold the tool pointed straight at the bolt or nut.

•

Excessive fastening torque may damage the

bolt/nut or socket. Before starting your job,

always perform a test operation to determine the

proper fastening time for your bolt or nut.

5 ENGLISH

90% of rated voltage

For 6905B

90% of rated voltage

Rated voltage

For 6906

Rated voltage

(S)