Makita 6912D Informações técnicas - Página 4

Procurar online ou descarregar pdf Informações técnicas para Ferramenta eléctrica Makita 6912D. Makita 6912D 5 páginas. 12mm cordless ratchet wrench
Também para Makita 6912D: Manual de instruções (12 páginas)

Imprimir página

Assembling

(1) Assemble the parts from 18 to 21.

Hold it down

(18)Spring

(21)Complete clutch cam assembly

Put the 19 steel balls 3.5 with the 20 compression spring 2.4 installed between the balls into the 3.6 mm

diameter bore at the end of the 18 spindle. Insert the steel balls aligned with the groove in the complete clutch

cam assembly by holding the 19 steel balls down. (See the fig. 3.)

(2) Mount the parts from (16) to (29) in the (5) housing L.

Place the needle bearing side on the motor side.

(5)Housing L

Fit the 28 switch lever in together with the 26 switch and also the 27 compression spring 6. Insert the 17 flat

washer 10 and 16 needle bearing 1015 in this order into the 18 spindle assembled in the above 1. Insert 3 pieces

of the 22 spur gears 16 into the 21 complete clutch cam assembly and engage the gears with the 23 internal spur

gear 49. Mount the 24 flat washer 15 at the same time.

(In assembling the internal spur gear, engage one of its slots against the rotation lock. Mount the 16 needle

bearing1015 by bringing it toward the left end as shown in the fig. 4.)(See the figs. 2, 3, & 4.)

(3) Assemble the 6 housing R and sub-housing R. (Confirm the 18 spindle can rotate smoothly, and that there is a

play in the axial direction after the housing and sub-housing are assembled.)

Grease

(23)Internal spur gear 49 locking part

Bring the 16 needle bearing 1015 against this face.

Ditch

Fig.3

(28)Put the 28 switch lever through

Fig.4