HIKVISION DS-7316HFI-S Manual de instalação

Procurar online ou descarregar pdf Manual de instalação para DVR HIKVISION DS-7316HFI-S. HIKVISION DS-7316HFI-S 7 páginas. Ds-7300hfi-s series

Imprimir página

Installation Guide

DS-7300HFI-S Series DVR

Verify Contents

Verify that the package contents are correct by checking the

items against the packing list.

Please contact your dealer for damaged or missing

Note:

items.

DVR Pre‐Installation

The DS-7300HFI-S Series DVR is highly advanced

surveillance equipment that should be installed with care.

Please take into consideration the following precautionary

steps before installation of the DVR.

1. Keep all liquids away from the DVR.

2. Install the DVR in a well-ventilated and dust-free area.

3. Ensure environmental conditions meet factory

specifications.

alarm shop

4. Install a manufacturer recommended HDD.

DVR Installation

During the installation of the DVR:

1. Use brackets for rack mounting.

2. Ensure there is ample room for audio and video cables.

3. When installing cables, ensure that the bend radius of the

cables are no less than five times than it's' diameter.

4. Connect both the alarm and RS-485 cable.

5. Allow at least 2cm (~0.75in) of space between racks

mounted devices.

6. Ensure the DVR is grounded.

7. Environmental temperature should be within the range of

-10ºC ~ 55ºC, 14ºF ~ 131ºF.

8. Environmental humidity should be within the range of

10% ~ 90%.

Hard Disk Installation

Before installing a hard disk drive (HDD), please make sure

the power is disconnected from the DVR. A factory

recommended HDD should be used for this installation.

(V3.1.0)

Installation Guide – DS-7300HFI-S Series DVR

Tools Required: Screwdriver.

To install a HDD on your DVR:

1. Remove the cover from

the DVR by unfastening

the screws on the back

and side.

2. Install the HDD in the

HDD rack using the

provided screws.

Fasten the screws on

the button to fix the

HDD.

3. Connect the HDD to the

motherboard of the

DVR with the included

data cable.

4. Connect the power

cable to the HDD.

5. Re-install the cover of

the DVR and fasten

screws.