Makita 9911 Manual de instruções - Página 5

Procurar online ou descarregar pdf Manual de instruções para Ferramenta eléctrica Makita 9911. Makita 9911 13 páginas. 76mm
Também para Makita 9911: Manual de instruções (17 páginas), Repartição das peças (3 páginas), Manual de instruções (8 páginas), Manual de instruções (8 páginas), Informações técnicas (5 páginas), Manual de instruções (17 páginas)

Imprimir página

FUNCTIONAL

DESCRIPTION

1. Lock button

2. Switch trigger

1. Speed adjusting dial

ASSEMBLY

1. Lever

CAUTION:

•

Always be sure that the tool is switched off and unplugged before

adjusting or checking function on the tool.

Switch action

003366

CAUTION:

•

Before plugging in the tool, always check to see that the switch trigger

actuates properly and returns to the "OFF" position when released.

To start the tool, simply pull the switch trigger. Release the switch trigger to

stop.

For continuous operation, pull the switch trigger and then push in the lock but-

ton.

To stop the tool from the locked position, pull the switch trigger fully, and then

release it.

Speed adjusting dial

For 9911 only

003369

The belt speed can be infinitely adjusted between 75 m and 270 m per minute

by turning the speed adjusting dial to a given number setting from 1 to 6.

Higher speed is obtained when the dial is turned in the direction of number 6;

lower speed is obtained when it is turned in the direction of number 1.

Select the proper speed for the workpiece to be sanded.

CAUTION:

•

If the tool is operated continuously at low speeds for a long time, the

motor will get overloaded, resulting in tool malfunction.

•

The speed adjusting dial can be turned only as far as 6 and back to 1. Do

not force it past 6 or 1, or the speed adjusting function may no longer

work.

CAUTION:

•

Always be sure that the tool is switched off and unplugged before

carrying out any work on the tool.

Installing or removing abrasive belt

003373

Pull the lever all the way out and install the belt over the rollers, and then return

the lever to the original position.