Makita AT422AZ Manual de instruções - Página 4

Procurar online ou descarregar pdf Manual de instruções para Ferramenta eléctrica Makita AT422AZ. Makita AT422AZ 7 páginas.

WARNING

Always disconnect the stapler from the air supply before ANY KIND of adjustment, clearance of jams,

service, cleaning, re-locating and during non-operation.

Always wear safety goggles with side shields and hearing protection. Employers and users are responsible

for ensuring anyone near the stapler is also protected.

When the stapler is being loaded or is connected to the air compressor, never place your hand or any other

body part in the stapler discharge area.

Use only parts and fasteners recommended by specification. Do not modify the stapler without authorization.

CAUTION

Do not throw the tool, strike the body in any way or use the tool as a hammer to knock material in place.

NOTE

Do not use the tool if it is not loaded, as this will accelerate wear on the stapler.

Make sure all hoses and fittings are free from damage and dirt, replacing any necessary items.

CAUTION：Do not store the stapler in cold weather as the valves and mechanisms may freeze up, causing

the tool to operate incorrectly.

Be sure to disconnect the stapler from the air supply before lubricating.

The stapler must be lubricated before the first use, and before and after each additional use. Oiling prevents

rust and extra wear. Manual lubrication can be skipped if an Oiler is used.

An Oiler conveniently provides oil circulation that also increases the efficiency and life of the tool. An Oiler

should be used if the stapler is used heavily or constantly. The Oiler should be checked daily for oil level.

NOTE

If operating in cold weather or below freezing, use permanent antifreeze as a lubricant. Some drying agents

may damage o-ring and seals, be sure to check these.

LUBRICATION AND MAINTENANCE