Makita BFL300F Manual de instruções - Página 2
Procurar online ou descarregar pdf Manual de instruções para Ferramenta eléctrica Makita BFL300F. Makita BFL300F 13 páginas. Cordless angle screwdriver
Também para Makita BFL300F: Manual de instruções (17 páginas), Informações técnicas (13 páginas), Manual de instruções (10 páginas)
Imprimir página
ENGLISH (Original instructions)
SPECIFICATIONS
Fastening torque
No load speed (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
For Model BFL300F
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Wear ear protection.
Model
Hard joint
With battery
BH1427
Soft joint
Hard joint
With battery
BL1430
Soft joint
Square drive
-1
)
Dimensions
Net weight
Rated voltage
equipment
environmentally
compatible
) : 72 dB(A)
pA
16 - 30 N • m
16 - 30 N • m
16 - 30 N • m
16 - 27 N • m
506 mm x 73 mm x 104 mm
ENE033-1
Vibration
The
vibration
determined according to EN60745:
END004-3
Work mode: screwdriving without impact
Vibration emission (a
Uncertainty (K) : 1.5 m/s
For Model BFL400F, BFL401F
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
and
its
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Vibration
The
vibration
determined according to EN60745:
Work mode: screwdriving without impact
Vibration emission (a
Uncertainty (K) : 1.5 m/s
ENG104-1
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
2
BFL300F
9.5 mm
400
510 mm x 73 mm x 104 mm
1.9 kg
D.C. 14.4 V
total
value
) : 2.5 m/s
h
2
pA
Wear ear protection.
total
value
) : 2.5 m/s
h
2
BFL400F/BFL401F
25 - 40 N • m
25 - 40 N • m
25 - 40 N • m
25 - 38 N • m
9.5 mm
260
2.0 kg
ENG204-2
(tri-axial
vector
sum)
2
or less
ENG104-1
) : 73 dB(A)
ENG204-2
(tri-axial
vector
sum)
2
or less
ENG901-1