Makita BFL400F Manual de instruções - Página 11
Procurar online ou descarregar pdf Manual de instruções para Ferramenta eléctrica Makita BFL400F. Makita BFL400F 17 páginas. Cordless angle screwdriver
Também para Makita BFL400F: Informações técnicas (13 páginas), Manual de instruções (13 páginas), Manual de instruções (10 páginas)
ASSEMBLY
1
2
3
1. Socket
2. Hole
3. Pin
OPERATION
CAUTION:
•
Always be sure that the tool is switched off and the
battery cartridge is removed before carrying out any
work on the tool.
Selecting correct socket
There are different types of sockets for some models
depending on applications. Choose and install a correct
socket for your application.
Installing or removing socket
005742
To install the socket, push it onto the square drive of the tool
with one hand by depressing a pin on the square drive with
another hand until it locks into place. To remove the socket,
simply pull it off depressing the pin on the square drive.
Hold the tool firmly and place the socket over the bolt or nut.
Then switch the tool on. When the clutch cuts in, the motor
will stop automatically. Then release the switch trigger.
NOTE:
•
Hold the tool with its square drive pointed straight at the
bolt or nut, or the bolt or nut will be damaged.
•
Use of a low temperature conditioned battery cartridge
may sometimes give warning for battery cartridge
capacity by warning lamp and beeper which makes the
tool stop immediately. In this case, the range of fastening
capacity may be inferior to those shown in the above
even if a charged battery cartridge is used.
11