GARCARE GHT08 Manual de instruções - Página 8

Procurar online ou descarregar pdf Manual de instruções para Serra de vara GARCARE GHT08. GARCARE GHT08 9 páginas. Corded hedge trimmer

Adjusting the position of handle, This function just for model GHT08

Press the rotary button on the model GHT08(do not press the trigger ) then rotate the

handle around the main part of the tool, the handle could be adjusted to different

position(-90° -45° 0 °90° 45°) to suit the right-hand or left-hand persons or to

be held in a comfortable manner. Make sure the rotary button is returned to the lock

position when the handle is adjusted to one position, otherwise,

the machine

could not be operated.

Cutting hedges

-First cut the sides from the bottom to the top. Cut the upper part giving it the shape you

prefer, in a straight horizontal form, roof-like or rounded.

-The safety blade has laterally rounded and staggered cutting teeth to reduce danger of

injury. The additional shock protection avoids inconvenient kickback when the blades

come into contact with walls, fences etc.

-If the blades are jammed or blocked by obstacles, switch the motor off immediately,

pull the plug, and then remove the object jamming the blades.

-Caution! Metal obstacles like fences etc. may damage the cutting blades.

-Always make sure to keep the extension cord behind your back and to start cutting the

hedge at the point nearest to the supply socked. Therefore plan your working direction

before staring.

Maintenance and servicing

-Before carrying out any checks or maintenance operations, disconnect the plug from

the electric power supply.

-Check your machine regularly before starting the work.

Damaged cutting blades have to be repaired or exchanged by a qualified service man

before working with the machine.

-After each cutting operation, clean the cutting blade with a soft brush and cloth with

lubricating fluid oil and spray a thin layer of fluid protective oil

-Always keep the ventilation slots in motor housing clean

-Never clean or spray a machine with water. Clean the motor housing only with a moist

cloth and never use detergents or solvents! These could ruin the plastic parts of the

machine. Finally, dry the motor housing carefully.

-Store the machine with the supplied protection cover.