FRINGE SPORT Commercial Glute Ham Developer Pro Manual - Página 6
Procurar online ou descarregar pdf Manual para Equipamento de fitness FRINGE SPORT Commercial Glute Ham Developer Pro. FRINGE SPORT Commercial Glute Ham Developer Pro 11 páginas.
7. Next, take the B ent Support Leg for Adjustable Foot Stand a nd secure the bottom
with the h ook side facing down using 2 Bolt Cs, 4 Washer Ds, and 2 Nut Bs. M ake
sure that the bolt head is on the outside of the machine and that the nut is on the inside
of the machine.
8. Continue to secure the B ent Support Leg for Adjustable Foot Stand u sing 2 Bolt Cs,
4 Washer Ds, and 2 Nut Bs t o attach it to the S traight Support Leg for the Half-Circle
Cushions. M ake sure that the bolt head is on the outside of the machine with the nut on
the inside of the machine.
9. Once the two supporting legs are in place, you can secure the front of the Cushion
Stand Base with Handles Attached u sing 2 Bolt Cs, 4 Washer Ds, and 2 Nut Bs .
Then secure the top, using 1 Bolt E and 1 Washer D. M ake sure that the bolt head is on
the outside of the machine.
10. Now, secure the H alf-Circle Cushions x 2 using 8 Bolt Ds and 8 Washer Bs .
11. After, secure the S liding Metal Bars x 2. T hey come with 4 1" washers and 4 ¾" bolts
attached. You will need to remove the washers and bolts to secure the bars to the
machine. Once the hardware is removed, slide on the S liders x 2.
12. Then, secure the bars with the sliders to the B ent Support Leg for Adjustable Foot
Stand u sing the included hardware. Be careful to not bend the metal as it can happen if
the hardware is screwed in too tightly.
13. Now, secure the Adjustable Foot Stand t o the top, flat part of the B ent Support Leg
for Adjustable Foot Stand u sing 6 Bolt Bs and 6 Washer Cs. M ake sure that the knob
is facing the inside of the machine.
14. Once it is in place, slide on the Cylinder Foot Cushions for Foot Stand x 4. T hen,
slide on the M etal Fringe Sport Covers for Cylinder Cushions x 4. M ake sure that
they are on correctly, by checking to see if they read "Fringe" Next, secure them using 4
Screw As and 4 Washer As.
15. After, secure the Foot Stand Back Panel t o the A djustable Foot Stand s o that the
panel is closest to the back of the machine. Use 2 Bolt As, 4 Washer Cs, and 2 Nut As.
Make sure that the bolt head is on the outside of the machine with the nut on the inside
of the machine.
16. Double check that every attachment is secure. Then, go kick your rear into high gear
using your new and freshly assembled Commercial Glute Ham Developer Pro!