Makita BJS100 Informações técnicas - Página 4
Procurar online ou descarregar pdf Informações técnicas para Ferramenta eléctrica Makita BJS100. Makita BJS100 9 páginas. Cordless metal shears 1.0mm (20ga)
Também para Makita BJS100: Manual de instruções (8 páginas), Manual de instruções (12 páginas)
Imprimir página
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-1. Center blade (cont.)
ASSEMBLING
2) Mount the assembled Shearing mechanism on Crank housing complete as illustrated in Figs. 7, 8.
Then assemble Crank housing complete to Gear housing complete. (Refer to Fig. 2.)
Fig. 7
Crank housing
complete
Fitting Dust cover in this rectangular depression,
assemble Shearing mechanism to Crank housing
complete.
Fig. 8
Insert Thin washer 7 and Teflon washer 7
into the space between Center blade and
Crank housing complete as illustrated below;
one set each into the both sides of Center blade.
Be sure to place Thin washer 7 on the blade side.
[3]-2. Side blades R and L
DISASSEMBLING
Side blade section can be disassembled
as described in Fig. 9.
ASSEMBLING
Do the reverse of the disassembling steps.
Note: Be sure to assemble Spacer between
Slip plate L and Side blade L
as illustrated in Fig.9.
Thin washer 7
Teflon washer 7
Center blade
Crank housing
complete
Fig. 9
Side blades R and L can be removed by removing
M5x10 Hex Socket countersunk screw.
Side blade R
Slip plate R
Shearing mechanism
Make sure that Dust cover
is assembled to Center blade
as described in Fig. 5.
Dust cover
Center blade
Insert Pin 7 through
Crank housing complete
from Side blade R side.
Side blade R
Pin 7
Stop ring E-6
M5x10 Hex socket
countersunk screw
Side blade L
Spacer
Slip plate L
P 4/ 9
Secure Pin 7 with
Stop ring E-4.
Stop ring E-4
Pin 7
Spacer is assembled
between Side blade L
and Slip plate L.