BEROTEC Mofessor Manual - Página 15

Procurar online ou descarregar pdf Manual para Sistemas de lubrificação BEROTEC Mofessor. BEROTEC Mofessor 16 páginas. Automatic chain lubrication system
Também para BEROTEC Mofessor: Manual (16 páginas), Manual do utilizador (12 páginas)

Imprimir página
6.

Troubleshooting

problem
no oil on the chain
soiled rear wheel
oil is leaking even
though ignition is
turned off
red LED isn't working
or turning off by itself
red LED of the switch
is flickering
7.

Disposal

Nonfunctional systems shouldn't be disposed as a whole but as individual
parts depending on the material. Non-recyclable parts have to be disposed
according to their type.
BEROTEC GmbH
Manual
possible reason
- tank empty
- nozzle blocked
- kinked tube
- nozzle misadjusted
- electric connections not
properly connected
- rain-mode not deactivated
after rain
- oil flow misadjusted
- control voltage cable is
connected to permanent
+12V
- tube damaged
- electric connections not
properly connected
- control voltage cable not
properly connected
- rain-mode switch cable is
located too close to parts
of the ignition system
MOFESSOR
action
→ refill oil
→ clean nozzle
→ check tube
→ check nozzle position
→ check connections
→ put rain-mode switch in
field of view
→ reduce oil flow
→ see chapter 4.5
→ check tube
→ check connections
→ see chapter 4.5
→ re-lay cable
P a g e
| 14