FRIONOR DVS2500 Instruções de utilização e manutenção - Página 6

Procurar online ou descarregar pdf Instruções de utilização e manutenção para Placa de fogão FRIONOR DVS2500. FRIONOR DVS2500 17 páginas. Vitroceramic cooktop

Imprimir página

OPERATION

1. COOKWARE

The use of flat-bottomed pots, with a diameter

equal to or slightly bigger than the heated area,

is recommended. (image 7). Do not use pots that

have a rough base, in order to prevent the hob

thermal surface from being scratched.

2. CONNECTION TO THE MAINS

When cooktop is connected to power supply, a

long beep will be heard. All LEDs and displays

on the Touch Control will be turned ON for 4

seconds. If the power supply goes out and then

comes back on, the hob will reset and reconnect

as described above.

3. CONTROL PANEL

2 Cooking Zones

A. ON / OFF key

B. Power increase key

C. Power decrease key

D. Zone selection key

E. Cooking zone power display

F. Timer key

G. Timer display

4. SWITCH ON/OFF KEY OF THE HOB

When cooktop is off and unlocked, touching for 1

second the ON/OFF key, all heaters will switch on

showing 0 power level. 1 short beep will be heard.

When cooktop is off, unlocked and indicating

residual heat 'H', when ON/OFF key is touched

properly, 2 short beeps will be heard, and 'H' re-

sidual heat indication will be seen.

When cooktop is on and unlocked, touching ON/

OFF key as required, all cooking zones will be

switched off. 4 short beeps will be heard.

When cooktop is off and locked, touching ON/

OFF, key as required, will not have any effect.

5. SWITCH ON/OFF A HEATER ZONE

If any cooking zone remains in level '0' for 10 sec-

onds, then it will switch off automatically and 4

beeping sounds will be heard.

If a cooking zone, whose display indicates resid-

ual heat, is switched ON, then its indication will

change to '0' level. If lock function is active, you

cannot switch ON any zone.

If there is residual heat indication on a cooking

zone which is OFF, then 'H' will continue to be

displayed until the zone is cooled down.

Even when lock function is active, you can still

switch OFF a zone.

If only one cooking zone is active and this one

is switched off, 4 short beeping sounds will be

heard indicating that the entire cooktop is OFF.

6. SELECTING A ZONE

Touching the heating zone selection control, a

digital indicator next to the key will show '0' and

a short beeps will be heard.

7. INCREASE / DECREASE POWER LEVEL

With a short press on '+' or '-' keys, Increase or

decrease power in the selected zones digit.

Access directly to 'P' from '0' level by pressing

– key.

With continuous press of "+" or "-" key, power

level increases/decreases continuously.

With continues pressing of "+" key, the power

level stops at level 9, and for a higher power an-

other short press of "+" key is needed. No beep-

ing sound is heard with continuous power level

increase/decrease.

Once the power reaches level 'P', pressing '+'

key again does not change power level to '0'.

When a hot cooking zone's power is leveled

down to '0', then after 10 seconds, the indication

'H' will appear on its display.

8. CHILD LOCK OPTION

By pressing '+' and '-' keys the letter 'L' will ap-

pears for 2 seconds, 2 beeping sounds will be

heard and the cooktop will be locked.