Makita BJV180 Manual de instruções - Página 8

Procurar online ou descarregar pdf Manual de instruções para Ferramenta eléctrica Makita BJV180. Makita BJV180 13 páginas. Cordless jig saw
Também para Makita BJV180: Repartição das peças (3 páginas), Ficha de especificações (2 páginas), Manual de instruções (13 páginas), Manual de instruções (13 páginas), Informações técnicas (13 páginas), Manual de instruções (18 páginas)

Imprimir página
Makita BJV180 Manual de instruções
Cover plate
007503
Use the cover plate when cutting decorative veneers,
plastics, etc. It protects sensitive or delicate surfaces
from damage. Fit it on the back of the tool base.
Anti-splintering device
2
007504
For splinter-free cuts, the anti-splintering device can be
used. To install the anti-splintering device, move the tool
base all the way forward and fit it from the back of tool
base. When you use the cover plate, install the
anti-splintering device onto the cover plate.
CAUTION:
The anti-splintering device cannot be used when
•
making bevel cuts.

Dust extraction

The dust nozzle (optional accessory) is recommended to
perform clean cutting operations.
1
001921
To attach the dust nozzle on the tool, insert the hook of
dust nozzle into the hole in the base.
The dust nozzle can be installed on either left or right
side of the base.
1. Cover plate
1
2. Base
2
1. Base
2. Anti-splintering
device
1
1. Dust nozzle
2. Base
2
001922
Then connect a Makita vacuum cleaner to the dust
nozzle.
1
007495

OPERATION

CAUTION:
Always hold the base flush with the workpiece.
•
Failure to do so may cause blade breakage,
resulting in a serious injury.
1
007487
Turn the tool on without the blade making any contact
and wait until the blade attains full speed. Then rest the
base flat on the workpiece and gently move the tool
forward along the previously marked cutting line.
NOTE:
If the tool is operated continuously until the battery
•
cartridge has discharged, allow the tool to rest for
15 minutes before proceeding with a fresh battery.
When cutting curves, advance the tool very slowly.
8
1. Dust nozzle
2. Hose for vacuum
cleaner
2
1. Cutting line
2. Base
2