Makita BO6030 Manual de instruções - Página 11

Procurar online ou descarregar pdf Manual de instruções para Ferramenta eléctrica Makita BO6030. Makita BO6030 14 páginas. Random orbit sander
Também para Makita BO6030: Manual de instruções (17 páginas), Repartição das peças (2 páginas), Manual de instruções (8 páginas), Informações técnicas (8 páginas), Manual de instruções (13 páginas), Manual de instruções (15 páginas), Manual de instruções (8 páginas)

OPERATION

Sanding operation

Turn the tool on and wait until it attains full

speed. Then gently place the tool on the

workpiece surface. Keep the pad flush with

the workpiece and apply slight pressure on

the tool.

CAUTION:

Never switch on the tool when it is in contact with the workpiece surface, causing an

Never run the tool without the abrasive disc. You may seriously damage the pad.

Never force the tool. Excessive pressure may decrease the sanding efficiency, damage

injury to operator.

the abrasive disc or shorten tool life.

Polishing operation

CAUTION:

Use only a Makita genuine sponge pad, felt pad or wool pad (optional accessories).

Always operate the tool at low speed to prevent work surfaces from heating abnormally.

Never force the tool. Excessive pressure may decrease the polishing efficiency and

cause motor overload, resulting in tool malfunction.

Applying wax

Use

an optional sponge pad. Apply wax to

the sponge pad or work surface. Run the

tool at low speed to smooth out wax.

NOTE:

First, wax a not conspicuous portion of the work surface to make sure that the tool will

not scratch the surface or result in uneven waxing.