Makita BO6030 Manual de instruções - Página 5

Procurar online ou descarregar pdf Manual de instruções para Ferramenta eléctrica Makita BO6030. Makita BO6030 8 páginas. Random orbit sander
Também para Makita BO6030: Manual de instruções (17 páginas), Repartição das peças (2 páginas), Manual de instruções (14 páginas), Manual de instruções (8 páginas), Informações técnicas (8 páginas), Manual de instruções (13 páginas), Manual de instruções (15 páginas)

10,000

4,000

A range: For polishing

B range: For finish sanding

C range: For regular sanding

NOTE:

•

The above figure shows standard applications.

They may differ under certain conditions.

ASSEMBLY

CAUTION:

•

Always be sure that the tool is switched off and

unplugged before carrying out any work on the

tool.

Front grip

► 1 . Notches 2. Front grip 3. Hole in front grip

4. Screwdriver

Install the front grip on the tool so that its protrusions fit

into the matching notches in the front of the tool. Secure

the front grip using a screwdriver to tighten the screw

through the hole in the front grip.

Dial setting

Installing or removing abrasive disc

► 1 . Abrasive disc

CAUTION:

•

Always use hook-and-loop system abrasive

discs. Never use pressure-sensitive abrasive

discs.

To install the abrasive disc, first remove all dirt or for-

eign matter from the pad. Then attach the abrasive

disc to the pad, using the hook-and-loop system of the

abrasive disc and the pad. Be careful to align the holes

in the abrasive disc with those in the pad.

To remove the disc from the pad, just pull up from its

edge.

Changing pad

► 1 . Hex wrench 2. Screw 3. Pad

Makita offers an extensive range of optional pads.

Remove the screw counterclockwise from the center

of the base with a hex wrench. After changing the pad,

tighten the screw clockwise securely.

5 ENGLISH