Garde 181ROTSLICE Manual do utilizador - Página 3
Procurar online ou descarregar pdf Manual do utilizador para Utensílios de cozinha Garde 181ROTSLICE. Garde 181ROTSLICE 5 páginas. Rotary produce slicer
Imprimir página
Please read and comply with the instructions listed on this document. To get the best service life and
performance from your machine, clean it thoroughly before and after each use by following the instructions
listed below. Minimize the use of alkaline cleaners as they may dull the finish and cause pitting.
Cleaning and Maintenance
1) Turn the shaft lock assembly to the left and pull the slicing assembly away from the frame to remove it.
2) Remove the lock pin and the shaft lock assembly. Set in a secure location where they will not get lost.
3) Lift the guard off of the frame.
4) Twist the push plate handle counter-clockwise to remove it from the push plate. Remove the push plate
from the trough.
5) Remove the unit from the mount.
6) Thoroughly clean all components with water and soap, or a mild detergent.
7) Immediately after cleaning, dry all components and re-assemble by reversing the disassembly process
described above.
8) If necessary, lubricate the grooves in the trough and push plate arms with mineral oil or its equivalent (do
not use cooking oil).
Changing Blades
1) Remove the slicing assembly from the rest of the unit by turning the shaft lock assembly to the left and
pulling the slicing assembly away from the frame.
2) Remove screws to release blades. Replace with new blades and secure using the screws)
USER MANUAL