Avanti SBCA017GL Manual de instruções - Página 9
Procurar online ou descarregar pdf Manual de instruções para Refrigerador de vinho Avanti SBCA017GL. Avanti SBCA017GL 16 páginas. Beverage cooler
Também para Avanti SBCA017GL: Manual de instruções (16 páginas), Lista de peças (2 páginas)
Imprimir página
Temperature Control
Setting the Temperature Control
• Your Beverage Cooler has only one control for regulating the
temperature. The temperature control is located on the upper
right hand corner of the compartment.
• To control the internal temperature, adjust the control knob
according to the ambient temperature or purpose of use.
• The first time you turn the unit on, set the temperature control to
"HI".
• The range of the temperature control is from position "OFF" to
"HI".
• After 24 hours, adjust the temperature control to the setting that best suites your needs. The
setting of "MED" should be appropriate for home or office Beverage Cooler use.
•
NOTE:
Turning the temperature control to "OFF" position stops the cooling cycle but does not shut off the
power to the appliance.
TO PREVENT LIQUIDS FROM FREEZING YOU MUST ADJUST THE TEMPERATURE CONTROL
TO THE MEDIUM SETTING AFTER THE INITIAL 24 HOUR PERIOD OF USE.
Interior Light
This Beverage Cooler is provided with a LED light located on the top of the compartment. The light is
manually activated and will not be on when the door is opened and be off when the door is closed. To
turn the light ON / OFF use the switch located and the top right hand side of the unit.
Defrosting Your Beverage Cooler
This model uses a superconductor heat-pipe cooling system with automatic defrosting system so
there is no need to defrost it manually.
Cleaning Your Beverage Cooler
•
UNPLUG the Beverage Cooler, and remove the shelf.
•
Wash the inside surfaces with a warm water and baking soda solution. The solution should be
about 2 tablespoons of baking soda to a quart of water.
•
Wash the shelf with a mild detergent solution.
•
The outside of the Beverage Cooler should be cleaned with mild detergent and warm water.
•
Wring excess water out of the sponge or cloth before cleaning the area of the controls, or any
electrical parts.
•
Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry
with a clean soft cloth.
CAUTION
Failure to unplug the Beverage Cooler could result in electrical shock or personal injury.
OPERATING YOUR BEVERAGE COOLER
CARE AND MAINTENANCE
9