GARDECO ISLA Manual de instruções de montagem e utilização - Página 2

Procurar online ou descarregar pdf Manual de instruções de montagem e utilização para grelha GARDECO ISLA. GARDECO ISLA 14 páginas. Cast iron fire pit 60cm dia on log store

Imprimir página

Before starting read these instructions carefully. We suggest you carry out assembly on a soft surface so as to avoid scratch-

ing the paint. Please note that because of the nature of cast metal, you may find roughness on the surface and the design.

This "one of a kind" look enhances the beauty of the product and is not a defect. Remember cast iron is fragile and will crack

easily so do not drop the bowl, handle with care.

DO NOT FULLY TIGHTEN THE BOLTS BEFORE ASSEMBLING ALL THE PARTS

Assembly is easier with two people, one to hold the parts and a second person to insert the fixings.

Tools required: screwdriver and socket wrench - forked poker supplied

Lay out and identify all the components

Assemble the bottom of one Log Store Side Panel (C) inside to Log Store Back Panel (B) and next to Log Store Base Panel

(A) by inserting one M6 x 12 bolt (I) through Log Store Back Panel (B), Log Store Side Panel (C) to Log Store Base Panel (A)

and fix with Nut (J) from inside. (Note: Make sure the Panels with the Bracket for fixing the Fire bowl are on top side).

3. Repeat for the other Log Store Side Panel bottom part assembly.

4. Assemble the middle and top parts of the two Log Store Side Panels (C) with Log Store Back Panel (B) by inserting two

sets of M6 x 12 bolts (I) through Log Store Back Panel (B) to Log Store Side Panels (C) and fix with Nuts (J) from inside.

5. Assemble the bottom of Log Store Front Panel (D) to Log Store Side Panels (A) by placing the Front Panel with the edge

over the two Side Panels and then inserting one set of M6 x 12 bolt (I) through Log Store Front Panel (D) to Log Store

Base Panel (A) and fix with Nuts (J) from inside.

6. Assemble the middle and top parts of the Log Store Front Panel (D) with the two Log Store Side Panels (C) by inserting

two sets of bolts (I) through Log Store Front Panel (D) to Log Store Side Panels (C) and fix with Nuts (J) from inside.

7. Put The Log Store Lid (E) onto the assembled Log Store.

8. Put the Fire Bowl (F) on Log Store Lid (E) with the Fire Bowl sit inside the hole on Log Store Lid, then fix the Fire Bowl (F)

to the assembled Log Store by inserting four M6 x 12 bolts (I) through Fire Bowl (F) to the Brackets on Log Store and fix

with Nuts (J).

9. Put the Charcoal Grill (G) into Fire Bowl (F).

Now check and tighten all fixings, assembly is complete.

DO NOT OVER TIGHTEN THE FIXING

ASSEMBLY

Keep plastic bags out of the reach of children and dispose of safely.

Please read the safety recommendations before use.

Keep these instructions in safe place for future reference.