JAMO 3A2 Manual rápido - Página 2

Procurar online ou descarregar pdf Manual rápido para Altifalantes JAMO 3A2. JAMO 3A2 4 páginas. Indoor/outdoor speakers
Também para JAMO 3A2: Manual do utilizador (9 páginas)

Imprimir página

Congratulations on your purchase of

Package content.

Speaker (2)

Assembled bracket (2)

Screw plug "g" (8)

Bracket.

The brackets comes pre-assembled. If disassembling the bracket for paint-

ing, re-assemble it as follow: Place the curved bracket (a) between the wall

bracket (b) and wall bracket cover (c) as shown in fig. 1. Insert two 1" allen

bolts (d) through wall bracket into wall bracket cover and tighten with the

supplied allen wrench. Insert two ½" allen bolts (e) into each side of wall

bracket and tighten towards curved bracket.

Mounting of bracket.

The bracket can be mounted for horizontal or vertical placement of the

speaker. Mount the bracket with four screws (not included) appropriate for

the surface the bracket is mounted to (wood, brick, concrete or other). Take

into account the weight of the speaker (specifications on back). A hole (f) in

the middle of the bracket allows for running the speaker wire through the

bracket if so desired. Cover the screws with four screw plugs (g) fig. 2.

Mounting of port plugs.

If the front of the speaker is exposed to rain directly entering the bass reflex

ports (under the grill), the ports should be closed to avoid filling the

speaker with water. High moisture is not a problem. Remove the grill (h)

from the speaker and insert two port plugs (i) into the bass ports. Re-install

the grill. The speaker will reproduce less bass with the ports closed.

Jamo Indoor/Outdoor speakers.

Port plug "i" (4)

Thumb screw "j" (4)

Covers "k" (4)

Allen wrench (1)

Manual (1)

Fig. 1