Avanti DG 202 BS Manual de instruções - Página 16
Procurar online ou descarregar pdf Manual de instruções para Gamas Avanti DG 202 BS. Avanti DG 202 BS 20 páginas.
Imprimir página
Figure 18
C
F
Figure 20a
Figure 21
16
CARE & MAINTENANCE
S
Do not use this step
Figure 19
Figure 20b
Safety
catch
Figure 22
BURNERS AND GRIDS
These parts can be removed and
cleaned with appropriate products.
After cleaning, the burners and their
flame distributors must be well dried
and correctly replaced.
It is very important to check that the
burner flame distributor and the cap
has been correctly positioned - failure
to do so can cause serious problems.
In appliances with electric ignition
keep the electrode clean so that the
sparks always strike.
Note: To avoid damage to the
electric ignition do not use it when
the burners are not in place.
CORRECT REPLACEMENT
OF THE BURNERS
It is very important to check that the
burner flame spreader "F" and the cap "C"
have been correctly positioned (see figs.
18 and 19).
Failure to do so can cause serious
problems.
In appliances with electric ignition, check
that the electrode "S" (fig. 18) is always
clean to ensure trouble-free sparking.
The ignition plug must be very carefully
cleaned.
OVEN ACCESSORIES
INSTALLATION AND
REMOVAL
– Assemble the wire racks on the oven
walls using the 2 screws (fig. 20a).
– Slide in, on the guides, the shelves (fig.
20b). Do not use the first step from the
top. The rack must be fitted so that the
safety catch, which stops it sliding out,
faces the inside of the oven.
– Position the broiling pan above the
oven shelf (see page 14).
– To dismantle, operate in reverse order.
OVEN DOOR
The internal glass of the oven door can be
easily removed for cleaning by unscrewing
the two lateral fixing screws (fig. 21).
REMOVABLE STORAGE
DRAWER
The drawer (fig. 22) comes out like a
normal drawer.
To remove the drawer open and lift it.
Do not store flammable material in
the oven or in the bottom drawer.