Lexmark 21G8600 - Z 816 Color Jetprinter Inkjet Printer Manual de instalação - Página 2
Procurar online ou descarregar pdf Manual de instalação para Impressora Lexmark 21G8600 - Z 816 Color Jetprinter Inkjet Printer. Lexmark 21G8600 - Z 816 Color Jetprinter Inkjet Printer 2 páginas. Setup solutions booklet
Também para Lexmark 21G8600 - Z 816 Color Jetprinter Inkjet Printer: Soluções de configuração (10 páginas)
Imprimir página
Make sure your computer is on.
11
Insert the CD.
14
Follow the instructions on your screen to
complete installation.
Setup Troubleshooting
Symptom:
Diagnosis:
The Power light is not lit
Is the power cord pushed all the way into the printer?
Is the printer connected to a working electrical outlet?
Software will not install
Is your operating system compatible with the printer?
Alignment page or test page will not print Is the printer on?
Do you see an error message on the monitor or flashing
lights on the printer?
Is your printer connected to your computer through another
device, such as a USB hub or switch box?
Did you remove the sticker and tape from the bottom of each
print cartridge?
Are the print cartridges installed properly?
Is the paper loaded correctly?
P/N 21G0070
E.C. 21G005
© 2004 Lexmark International, Inc. All rights reserved.
Attach the USB cable to your printer and computer.
12
If you inserted the CD and the install screen did not appear (Windows):
1 Click Cancel on any Add New Hardware screens.
2 Eject and reinsert the printer software CD.
If the printer software install screen does not appear:
a From your desktop, double-click My Computer (In Windows XP, click Start
b Double-click the CD-ROM drive icon. If necessary, double-click setup.exe.
c When the printer software install screen appears, click Install.
d Follow the instructions on the screen to complete the installation.
If you inserted the CD and the install screen did not appear (Mac):
1 From your desktop, double-click the Lexmark 810 Series Installer icon.
2 Double-click Install and follow the instructions on the screen.
Solution:
Disconnect the power cord from the wall outlet, and then
from the printer. Reconnect the power cord by pushing it all
the way into the connector on the printer, and then into the
wall outlet.
Connect the printer to an electrical outlet that other electrical
devices have been using.
The printer supports these operating systems:
• Windows 98
• Windows Me
• Windows 2000
• Windows XP
• Mac OS X version 10.1.5
• Mac OS X version 10.2.3 and later
Press the Power button. If the Power light does not come
on, see the "The Power light is not lit" symptom at the
beginning of this table.
See "Error messages troubleshooting" in your User's Guide.
Disconnect the USB cable from any other devices and
directly connect it between the printer and your computer.
For help, see step 12.
Remove the print cartridges, check for the sticker and tape
and then reinsert them. For help, see step 7 and step 8.
See step 10.
Important!
13
Click Cancel on the New Hardware screen.
Note: New Hardware screens appear only for Windows users. For Macintosh, continue to step 14.
My Computer).
à
Have a question?
• Refer to the User's Guide.
For Windows:
Click Start
à
Programs or All Programs
For Mac OS X:
1 From your desktop, double-click the Lexmark 810 Series folder alias.
2 Double-click the Lexmark 810 Series.help alias.
• Refer to the Lexmark Solution Center software.
1 Click Start
Programs or All Programs
à
2 Click the Troubleshooting tab on the left side of the screen.
• Visit our Web site:
http://support.lexmark.com/
• Call us at 1-800-332-4120.
Monday-Friday (9:00 AM - 9:00 PM EST)
Saturday (Noon-6:00 PM EST)
Note: Phone number and support times may change without notice.
Record the following information (located on your store receipt and the back of your printer) and have it ready
when you contact us so that we may serve you faster:
Machine Type number
Serial number
Date purchased
Store where purchased
Need more ink?
The following cartridges work with your printer.
• 31
• 32
• 33
• 34
• 35
Federal Communications Commission (FCC)
compliance information statement
This product complies with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. Refer to the
à
Lexmark 810 Series
à
User's Guide.
Lexmark 810 Series
Lexmark Solution Center.
à
à